Propose a New Model for Prediction of the Impact Wear Using an Experimental Method

Journal of Solid Mechanics

مقاله 3، دوره 5، شماره 3، آذر 2013، صفحه 245-252   

نوع مقاله: Research Paper

نویسندگان

M Akhondizadeh^{* 1}؛ M Fooladi Mahani¹؛ M Rezaeizadeh²؛ S.H Mansouri¹

¹Mechanical Engineering Department of Shahid Bahonar, University of Kerman

²Graduate University of Advanced Technology, Kerman

چکیده

Impact wear can be defined as the wear of a solid surface that is due to percussion, which is a repetitive exposure to dynamic contact by another solid body. It generally has the devastating effects on the mechanical elements and causes the equipments to shift away from their normal performance. Impact wear has not been studied as extensive as other wear mechanisms and as a result information on the causes and actual impact wear data is quite scarce. Knowing how the impact parameters affect the wear intensity would be helpful to have the more optimal designs. Having an experimental apparatus would be a reliable way for this aim. In the present work, a new impact tester was designed to explore the consecutive impacts between balls and a flat plate as a wearing specimen. Measurements of the plate mass loss after a number of impacts at the different impacting conditions revealed the effect of parameters on the impact wear. Design of experiment is carried out regarding the impact velocity, ball size and impact angle as the variables. An impact wear model is extracted based on the experimental data. The obtained results suggest that the model can be used as a predictive way to study the practical design problems and to explain some phenomena associated with impact erosion.

کلیدواژه‌ها

Impact wear؛ Contact؛ Wear modeling, Steel, Indentation

مراجع

[1] Bayer R. G., Engel P. A., Sirico J. L., 1971, Impact wear testing machine, Wear 24: 343-354.

[2] Engel P. A., Lyons T. H., Sirico J. L., 1973, Impact wear for steel specimens, Wear 23:185-201.

[3] Engel P. A., Millis D.B., 1982, Study of surface topology in impact wear, Wear 75: 423- 442.

[4] Goryacheva G., Contact Mechanics in Tribology, Institute for Problems in Mechanics, Russian Academy of Sciences, Moscow, Russia, Kluwer Academic Publishers.

[5] Mindlin R. D., Deresiewicz H., 1953, Elastic spheres in contact under varying oblique forces, Applied Mechanics 12: 116-125.

[6] Maw N., 1975, The oblique impact of elastic spheres, Wear 25:101-114.

[7] Gorham D. A., Kharaz A. H., 2000, The measurement of particle rebound characteristics, Powder Technology 112:193-202.

[8] Kharaz A.H., Gorham D.A., Salman A.D., 2001, An experimental study of the elastic rebound of spheres, Powder Technology 25: 281–291.

[9] Levy A., 1993, The erosion–corrosion of tubing steels in combustion boiler environments, Corrosion Science 35: 1035-1056.

[10] Bellman R., Levy A., 1981, Erosion mechanism in ductile metals, Wear 225: 1-27.

[11] Lindsley B.A., Marder A.R., 1999, The effect of velocity on the solid particle erosion rate of alloys, Wear 225-229: 510–516.

[12] Head W.J., Harr M.E., 1970, The development of a model to predict the erosion of materials by natural contaminants, Wear 15:1- 46.

[13] Xie Y., McI Clark H., Hawthorne H.M., 1999, Modelling slurry particle dynamics in the Coriolis erosion tester, Wear 225-229:405-416.

[14] Talia M., Lankarani H., Talia J.E., 1999, New experimental technique for the study and analysis of solid particle erosion mechanisms, Wear 250:1070-1077.

[15] Di Maio F. P., Renzo A. Di., 2005, Modeling particle contacts in distinct element simulations, Chemical Engineering Research and Design 83:1287-1297.

[16] Lewis D.A., Rogers R. J., 1988, Experimental and numerical study of forces during oblique impact, Journal of Sound and Vibration 125(3): 403- 412.

[17] Iwai Y., Hondaa T., Yamadaa H., Matsubara T., Larsson M., Hogmark S., 2001, Evaluation of wear resistance of thin hard coatings by a new solid particle impact test, Wear 251: 861-867.

[18] Yang L.J., 2005, A test methodology for the determination of wear coefficient, Wear 259:1453-1461.

[19] Ashrafizadeh H., Ashrafizadeh F., 2012, A numerical 3D simulation for prediction of wear caused by solid particle impact, Wear 276:75- 84.