Analytical Solution for Response of Piezoelectric Cylinder Under Electro-Thermo-Mechanical Fields

Journal of Solid Mechanics

مقاله 3، دوره 5، شماره 4، اسفند 2013، صفحه 350-370   

نوع مقاله: Research Paper

نویسندگان

S Golabi^* ؛ J Jafari Fesharaki

Department of Mechanical Engineering, University of Kashan

چکیده

This paper presents an analytical solution for response of a piezoelectric hollow cylinder under two-dimensional electro thermo mechanical fields. The solution is based on a direct method and the Navier equations were solved using the complex Fourier series. The advantage of this method is its generality and from mathematical point of view, any type of the thermo mechanical and electrical boundary conditions can be considered without any restrictions. The thermo mechanical and electrical displacements are assumed that vary in radial and circumferential directions. Finally, three examples were considered to confirm the results and investigate the effect of in-phase and opposite-phase electro thermo mechanical boundary loads on two-dimensional electro thermo mechanical behavior of piezoelectric hollow cylinder. The results are compared with the previous work and FEM analysis. The main result of this study is that, by applying a proper distribution of thermal, electrical and mechanical fields, the distributions of electric and mechanical displacement, thermal and mechanical stresses can be controlled.                       

کلیدواژه‌ها

Two-Dimensional؛ Piezoelectric؛ Thermo elasticity؛ Cylinder؛ Analytical solution؛ Fourier series

مراجع

[1] Giurgiutiu V., Zagrai A., Bao J., 2004, Damage identification in aging aircraft structures with piezoelectric wafer active sensors, Journal of Intelligent Material Systems and Structures 15: 673-687.

[2] Ying C., Zhifei S., 2006, Double-layered piezo-thermoelastic hollow cylinder under some coupled loadings, Archive of Applied Mechanics 75:326-337.

[3] Haojiang D., Buo C., Gjian L., 1996, General solutions for coupled equations for piezoelectric media, International Journal of Solids and Structures 33:2283-2298.

[4] Zhang l., Gao P., Li D., Wang X., 2011, The unified equations to obtain the exact solutions of piezoelectric plane beam subjected to arbitrary loads, Journal of Mechanical Science and Technology 25:1823-1835.

[5] Khoshgoftar M.J., Ghorbanpour A., Arefi M., 2009, Thermoelastic analysis of a thick walled cylinder made of functionally graded piezoelectric material, Smart Materials and Structures 18:115007.

[6] XU Y. P., ZHOU D., 2010, Three-dimensional elasticity solution of transversely isotropic rectangular plates with variable thickness, Iranian Journal of Science & Technology, Transaction B: Engineering 34:353-369.

[7] Jafari Fesharaki J., Jafari Fesharaki V., Yazdipoor M., Razavian B., 2012, Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder, Applied Mathematical Modelling 36:5521-5533.

[8] Tarn J. Q., 2002, Exact solutions of a piezoelectric circular tube or bar under extension, torsion, pressuring, shearing, uniform electric loading and temperature change, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 458:2349-2367.

[9] Zhang C., Cheung Y. K., Di S., Zhang N., 2002, The exact solution of coupled thermoelectroelastic behavior of piezoelectric laminates, Computers & Structures 80:1201-1212.

[10] Dumir P. C., Dube G. P., Kapuria S., 1997, Exact piezoelastic solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending, International Journal of Solids and Structures 34:685-702.

[11] Galic D., Horgan C.O., 2003, The stress response of radially polarized rotating piezoelectric cylinders, American Society of Mechanical Engineers 70:426-435.

[12] Galic D., Horgan C. O., 2001, Internally pressurized radially polarized piezoelectric cylinders, Journal of Elasticity 66:257-272.

[13] Dai H. L., Wang X., 2005, Thermo-electro-elastic transient responses in piezoelectric hollow structures, International Journal of Solids and Structures 42:1151-1171.

[14] Guan Q., He S. R., 2005, Two-dimensional analysis of piezoelectric/piezomagnetic and elastic media, Composite Structures 69:229-237.

[15] Gu G. Q., Wei E. B., Xu C., 2009, Effective elastic properties of piezoelectric composites with radially polarized cylinders, Physica B: Condensed Matter 404:4001-4006.

[16] Dai H. L., Hong L., Fu Y. M., Xiao X., 2010, Analytical solution for electromagnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder, Applied Mathematical Modelling 34:343-357.

[17] Dai H. L., Wang X., 2004, Dynamic responses of piezoelectric hollow cylinders in an axial magnetic field, International Journal of Solids and Structures 41:5231-5246.

[18] Yee K. C., Moon T. J., 2002, Plane thermal stress analysis of an orthotropic cylinder subjected to an arbitrary, transient, asymmetric temperature distribution, Journal of Applied Mechanics 69:632-640.

[19] Parton V. Z., Kudryavtsev B. A., 1988, Electromagnetoelasticity: Piezoelectrics and Electrically Conductive Solids, Gordon and Breach, New York.

[20] Hetnarski R. B., Eslami M. R., 2009, Thermal Stresses Advanced Theory and Applications, Springer.

[21] Saadatfar M., Razavi S., 2009, Piezoelectric hollow cylinder with thermal gradient, Journal of Mechanical Science and Technology 23:45-53.

[22] Alibeigloo A., 2011, Thermoelastic solution for static deformations of functionally graded cylindrical shell bonded to thin piezoelectric layers, Composite Structures 93:961-972.