Free Vibration Analysis of Continuously Graded Fiber Reinforced Truncated Conical Shell Via Third-Order Shear Deformation Theory

Journal of Solid Mechanics

مقاله 16، دوره 8، شماره 1، خرداد 2016، صفحه 212-231   

نوع مقاله: Research Paper

نویسندگان

M.H Yas^{* 1}؛ M Nejati¹؛ A Asanjarani²

¹Mechanical Engineering Department, Razi University, Kermanshah, Iran

²Department of Mechanical Engineering, Islamic Azad University, Arak Branch, Iran

چکیده

This paper deals with free vibration analysis of continuously graded fiber reinforced (CGFR) truncated conical shell based on third-order shear deformation theory (TSDT), by developing special power-law distributions. The orthotropic (CGFR) truncated conical shell are clamped and simply supported at the both ends. It is assumed to have a smooth variation of fibers volume fraction in the thickness direction. Symmetric and classic volume fraction profiles are examined. The appropriate displacement functions which identically satisfy the axisymmertic conditions are used to simplify the motion equations to a set of coupled ordinary differential equation with variable coefficients, which can be solved by generalized differential quadrature method (GDQM), to obtain the natural frequencies. The fast rate of convergence of the method is observed. To validate the results, comparisons are made with the available solutions for isotropic and CGM isotropic truncated conical shells. The effect of various geometrical parameters on the vibrational behavior of the CGFR truncated conical shell is investigated. This literature mainly contributes to illustrate the impact of the power-law distributions on the vibrarional behavior of orthotropic continuous grading truncated conical shell. This paper is also supposed to present useful results for continuouly graded fibers volume fraction in the thickness direction of a truncated conical shell and comparison with similar discrete laminated composite one.
 

کلیدواژه‌ها

Continuously graded fiber reinforced؛ Special power-law distributions؛ Truncated conical shell؛ Free vibration؛ TSDT

مراجع

[1] Malekzadeh P., 2009, Three-dimensional free vibration analysis of thick functionally graded plates on elastic foundations, Composite Structures 89: 367-373.
[2] Hosseini-Hashemi Sh., Rokni H., Damavandi T., Akhavan H., Omidi M., 2010, Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory, Applied Mathematical Modelling 34: 1276-1291.
[3] Pan E., Han F., 2005, Exact solution for functionally graded and layered magnetoelectro- elastic plates, International Journal of Engineering Science 43: 321-339.
[4] Yas M.H., Sobhani Aragh B., 2010, Free vibration analysis of continuously graded fiber reinforced plates on elastic foundation, International Journal of Engineering Science 48: 1881-1895.
[5] Chen W.Q., 2000, Vibration theory of non-homogeneous, spherically isotropic piezoelastic bodies, Journal of Sound and Vibration 229: 833-860.
[6] Chiroiu V., Munteanu L., 2007, On the free vibrations of a piezoceramic hollow sphere, Mechanics Research Communications 34: 123-129.
[7] Bahtui A., Eslami M.R., 2007, Coupled thermoelasticity of functionally graded cylindrical shells, Mechanics Research Communications 34: 1-18.
[8] Haddadpour H., Mahmoudkhani S., Navazi H.M., 2007, Free vibration analysis of functionally graded cylindrical shells including thermal effects, Thin-Walled Structures 45: 591-599.
[9] Sobhani Aragh B., Yas M.H., 2010, Static and free vibration analyses of continuously graded fiber-reinforced cylindrical shells using generalized power-law distribution, Acta Mechanica 215: 155-173.
[10] Sobhani Aragh B., Yas M.H., 2010, Three-dimensional analysis of thermal stresses in four-parameter continuous grading fiber reinforced cylindrical panels, International Journal of Mechanical Sciences 52: 1047-1063.
[11] Sobhani Aragh B., Yas M.H., 2010, Three-dimensional free vibration of functionally graded fiber orientation and volume fraction cylindrical panels, Materials & Design 31: 4543-4552.
[12] Yas M.H., Sobhani Aragh B., 2010, Three-dimensional analysis for thermoelastic response of functionally graded fiber reinforced cylindrical panel, Composite Structures 92: 2391-2399.
[13] Thambiratnam D., Zhuge Y., 1993, Axisymmetric free vibration analysis of conical shells, Engineering Structures 15(2): 83-89.
[14] Tong L., 1993, Free vibration of orthotropic conical shells, International Journal of Engineering Science 31(5): 719-733.
[15] Leissa A., 1993, Vibration of Shells, The Acoustic Society of America.
[16] Liew K.M., Lim C.W., 1994, Vibratory characteristics of cantilevered rectangular shallow shells of variable thickness, The American Institute of Aeronautics and Astronautics 32(3): 87-96.
[17] Liew K.M., Lim C.W.. 1994, Vibration of perforated doubly-curved shallow shells with rounded corners, International Journal of Solids and Structures 31(15): 19-36.
[18] Shu C., 1996, Free vibration analysis of composite laminated conical shells by generalized differential quadrature, Journal of Sound and Vibration 194: 587-604.
[19] Bardell N.S., Dunsdon J.M., Langley R.S., 1998, Free vibration of thin, isotropic, open, conical panels, Journal of Sound and Vibration 217: 297-320.
[20] Wang Y., Liu R., Wang X., 1999, Free vibration analysis of truncated conical shells by the Differential Quadrature Method, Journal of Sound and Vibration 224(2): 387-394.
[21] Sofiyev A.H., 2009, The vibration and stability behavior of freely supported FGM conical shells subjected to external pressure, Composite Structures 89(3): 56-66.
[22] Liew K.M., Ng T.Y., Zhao X., 2005, Free vibration analysis of conical shells via the element-free kp-Ritz method, Journal of Sound and Vibration 281: 627-645.
[23] Bhangale R.K., Ganesan N., Padmanabhan C., 2006, Linear thermoelastic buckling and free vibration behavior of functionally graded truncated conical shells, Journal of Sound and Vibration 292: 341-371.
[24] Tornabene F., 2009, Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution, Computer Methods in Applied Mechanics and Engineering 198: 2911-2935.
[25] Malekzadeh P., Fiouz A.R., Sobhrouyan M., 2012, Three-dimensional free vibration of functionally graded truncated conical shells subjected to thermal environment, International Journal of Pressure Vessels and Piping 89: 210-221.
[26] Sofiyev A.H., 2012, The non-linear vibration of FGM truncated conical shells, Composite Structures 94: 2237-2245.
[27] Reddy J.N., 1984, A refined nonlinear theory of plates with transverse shear deformation, International Journal of Solids and Structures 20: 881-896.
[28] Lee Y.S., Lee K.D., 1997,On the dynamic response of laminated circular cylindrical shells under impulse loads, Computers & Structures 63(1): 149-157.
[29] Khalili S.M.R., Malekzadeh K., Davar A., Mahajan P., 2010, Dynamic response of pre-stressed fibre metal laminate (FML) circular cylindrical shells subjected to lateral pressure pulse loads, Composite Structures 92: 1308-1317.
[30] Vasiliev V.V., Morozov E.V., 2001, Mechanics and Analysis of Composite Materials, Elsevier Science.
[31] Bert C.W., Malik M., 1996, Differential quadrature method in computational mechanics, a review, Journal of Applied Mechanic 49: 1-27.
[32] Irie T., Yamada G., Tanaka K., 1984, Natural frequencies of truncated conical shells, Journal of Sound and Vibration 92: 447-453.