Investigation the Effect of Knowledge Management on Organizational Agility

Journal of System Management

مقاله 6، دوره 3، شماره 1 - شماره پیاپی 9، فروردین 2017، صفحه 67-80

نوع مقاله: Research Paper

نویسنده

Houshang Taghizadeh^*

Department of Management, Tabriz Branch, Islamic Azad University, Tabriz, Iran

چکیده

Abstract. The purpose of the present article is to determine the effect of knowledge management on organizational agility through the use of structural equations modeling in auto-parts manufacturing companies. For this purpose, along with the review of concepts such as organizational agility and knowledge management, the dimensions and capabilities of knowledge management and organizational agility have been identified with regard to the research literature. The statistical population consists of all the managers of large and small auto-parts manufacturing companies of East Azerbaijan Province. The sample size of 132 persons has been obtained through the use of sampling formula in limited populations. In order to collect data, we have used a questionnaire, the validity of which has been confirmed by content validity and the reliability of which has been confirmed through the use of Cronbach's Alpha coefficient. Structural equations modeling has been applied in order to analyze the research data. The results indicate that knowledge management affects organizational agility as well as organizational agility capabilities.

کلیدواژه‌ها

Keywords: Knowledge Management؛ Organizational Agility؛ Structural Equations Model

مراجع

[1]  Agarwal, A., Shankar R., Tiwari M.K. (2007), Modeling agility of supply chain, Industrial Marketing Management, Vol.36. Iss. 4, pp. 443-457.

[2]  Arteta, B.M. and Giachetti, R.E.(2004), A measure of agility as the complexity of the enterprise system, Robotics and Computer-Integrated Manufacturing, Vol. 20, Iss.6, pp. 495–503.

[3]  Baker, P.(2008), The design and operation of distribution centres within agile supply chains, International Journal of Production Economics, Vol. 111, Iss. 1, pp. 27-41.

[4]  Beckman T. J. (1999). The Current State of Knowledge Management. In Liebowitz, J. Knowledge Management Handbook. New York: CRC Press.Woolf (1990).

[5]  Blackler, F.1995. The knowledge, knowledge work and organization: An overview and interpretation, Organization Studies 16(6): 1021-1046.

[6]  Brown, S. and Bessant, J. (2003), The manufacturing strategy-capabilities links in mass customization and agile manufacturing: an exploratory study, International Journal of Operations & Production Management, Vol. 23 No. 7, pp. 707-30.

[7]  Burgess, T.F. (1994), “Making the leap to agility: defining and achieving agile manufacturing through business process redesign and business network redesign”, International Journal of Operations & Production Management, Vol. 14 No. 11, pp. 23-34.

[8]  Chua, A. (2002), Taxonomy of Organisational Knowledge, Singapore Management Review, Vol. 24, No. 4, pp. 69-76.

[9]  Davenport, T.H., and L. Prusak. (1998). Working Knowledge: How Organizations Manage What They Know, Boston. MA: Harvard Business School Press.

[10]        Dove, R. (1999), Knowledge Management, Responsibility, and the Agile Enterprise, Journal of knowledge Management, No.10, pp.18-35.

[11]        Goldman, S. & Nagel, R. and Preiss, K. (1995), Agile Competitors and Virtual organizations, Kenneth: Van Nostrand Reinhold.

[12]        Grant, R.M. (1996). Toward a knowledge based theory of the firm. Strategic Management Journal. (17):109–122.

[13]        Gunasekaran, A., Mcgaughey, R. and Wolstencroft, V. (2001), Agile manufacturing: concepts and framework, Agile Manufacturing: The 21st Century Competitive Strategy, Elsevier, pp.25-49.

[14]        Hackett, B. (2000). Beyond knowledge management: new ways to work and learn. New York: The Conference Board.

[15]        Hedlund, G., and I. Nonaka. (1993). .Models of knowledge management in the West and Japan. in: P. Lorange, B. Chakravarthy, J. Roos, A. Van de Ven (Eds.). Implementing Strategic Processes: Change, Learning and Co-operation. Blackwell: Oxford.

[16]        Hoffman J., Hoelscher, M.L. and Sherif, K. (2005), Social capital, knowledge management and sustained superior performance, Journal of Knowledge Management, Vol. 9, No. 3, pp.93-100.

[17]        Hormozi, A.M. (2001), Agile manufacturing: the next Logacal Step, Benchmarking an International Gournal, No.2, pp.132-143.

[18]        Hunter, L., Beaumont, P. and Lee, M. (2002). Knowledge Management Practice in Scottish Law Firms, Human Resource Management Journal, Vol. 12, No. 2, pp.4 – 21.

[19]        Kakabadse, N. K., A. Kakabadse., and A. Kouzmin. (2003). Reviewing the knowledge management literature: towards a taxonomy. Journal of Knowledge Management 7(4):75–91.

[20]        Kidd, P. (2000), “Two definitions of agility”, available at: www.CheshireHenbury.com

[21]        Liao, S. H. (2003). Knowledge management technologies and applications- literature review from 1995 to 2002. Expert Systems with Application(25):155–164.

[22]        Malhotra Yogesh (2000). Knowledge Management for E-Business Performance: Advancing Information Strategy to ‘Internet Time, Information Strategy: The Executive's Journal, Vol. 16, No. 4, pp. 5-16.

[23]        Marwick, A.D. (2003)., Knowledge management technology, Systems Journal, Vol. 40, No. 4, p. 81-84.

[24]        McGaughey, R. (1999), Internet Technology: Contributing to Agility in the Twenty-firse Century, International Journal of Agile Manufacturing system, pp. 7-13.

[25]        Murray G. (1999). The knowledge management factbook. International data corporation report.

[26]        Narasimhan, R., Swink, M. & Soo Wook, K. (2006), Disentangling leanness and agility: An empirical investigation, Journal of Operation Management, No. 24, pp. 440-457.

[27]        Ngai, E.W.T., and E.W.C. Chan. (2005). Evaluation of knowledge management tools using AHP. Expert Systems with Applications(29): 889–899.

[28]        Prahalad, C.K., and G. Hamel. (1990). The core competence of the corporation. Harvard Business Review: 79–91.

[29]        Prusak, L. (1996). The knowledge advantage. Strategy and Leadership (24): 6-8. Roth, A.V. 1996. Achieving strategic agility through economies of knowledge.Strategy and Leadership (24): 30–37.

[30]        Radding, A. (1998), Knowledge Management: Succeeding in the Information-Based Global Economy, New York, Publications Computer Technology Research Corp.

[31]        Sanchez, L.M. and Nagi, R. (2001). A review of agile manufacturing systems, International Journal of Production Research, Vol. 39 No. 16, pp. 3561-3600.

[32]        Sharifi, H. & Zhang, Z. (1999). A methodology for achieving agility in manufacturing organization, International Journal of Production Economics, No. 62, pp. 7-22.

[33]        Szulanski, G. (1996). Exploring internal stickiness: impediments to the transfer of best practices within the firm. Strategic Management Journal(17): 27–43.

[34]        Turban, E., (2003) "Information technology for management: Transforming organizations in the digital economy", John Wiley & Sons, Ltd.

[35]        Wang, Catherine L. & Ahmed Perveiz, K. (2003). Structure & Structural Dimensions For Knowledge-Based Organizations, Measuring Business Excellence, Vol.7, Issue.1, pp. 51-62.

[36]        Wen, Y.F. (2009). An effectiveness measurement model for knowledge management. Knowledge-Based Systems(22): 363–367.

[37]        White A, Daniel EM, Mohdzain M. (2005), The role of emergent information technologies and systems in enabling supply chain agility, International Journal of Information Management, Vol. 25, Issue, 5, pp. 396 410.

[38]        Youssef, Y.Y. & Sarhadi, M. & Gunasekaran, A. (1999). Agile manufacturing: The drivers, Concepts and attributes, International Journal Production Economics, Vol.62, Issue. 1-2, pp.33-43.

[39]        Yusuf, Y.Y., Sarhadi, M. and Gunasekaran, A. (1999). Agile manufacturing: the drivers, concepts and attributes, International Journal of Production Economics, Vol. 62, Iss, 1/2, pp. 33-43.

[40]        Zain, M., Rose, R.C, Abdullah, I. and Masrom, M. (2005), The relationship between information technology acceptance and organizational agility in Malysia, Information & Management, Vol. 42, Iss. 6, pp. 829–839.

[41]        Zhang, Z. and Sharifi, H. (2000). A methodology for achieving agility in manufacturing organizations, International Journal of Operations & Production Management, Vol. 20 No. 4, pp. 496-512.