Deflection and Free Vibration of Sandwich Panel with Honeycomb Core on Winkler Elastic Foundation

Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

مقاله 12، دوره 10، شماره 1 - شماره پیاپی 28، اردیبهشت 2017، صفحه 711-726   

نوع مقاله: Persian

نویسندگان

younes yousefi^{* 1}؛ Hossein Vahdanifar²؛ Reza Shirani²؛ Mohamad Dehghani³

¹Lecturer, Engineering Department, Omidiyeh Branch, Islamic Azad University, Khuzestan, Iran.

²MSc Student, Department of Engineering Shahid Chamran University, Khuzestan, Ahwaz, Iran

³Phd student, Department of Mechanical Engineering, Yazd University , Yazd ,Iran

چکیده

In this paper deflection and free vibration of sandwich panel is studied. The core of Sandwich panels is made of hexagonal honeycomb and faces are made of two different materials of Carbon Fiber Reinforced Plastic and K-aryl/epoxy covering. The governing equations are deduced from the First order Sheer Deformation Theory (FSDT) and they are solved using Generalized Differential Quadrature Method (GDQM). The classical method in the references is used to verify the DQ method and to show that the applied GDQM method has a good results with compared to the references. Deflection of sandwich panel is investigated with two different load types. Finally natural frequency for the first 4 modes and the two different faces materials are calculated and the effect of various lengths to core thickness ratios and faces to honeycomb core thickness ratios are studied. Further, the effect of foundation stiffness coefficient on deflection and natural frequency are showed

کلیدواژه‌ها

Nano beam؛ Piezoelectric؛ Electromechanical-coupling؛ Radom vibrations

مراجع

[1] Kim H. Kim J.H. Kim J. A review of piezoelectric energy harvesting based on vibration, International Journal       of Precision Engineering and Manufacturing, Vol.12, 2011, pp.1129-1141.

 

[2] Zamanian M. Rezaei H. Hadilu M, A comprehensive analysis on the discretization method of the equation of motion in piezoelectrically actuated micro beams, Smart Structures and Systems, Vol. 16, 2015, pp.891- 918,

 

[3] Ke L.L, Wang Y.S, Thermoelectric-mechanical vibration of piezoelectric Nano beams based on the nonlocal theory, Smart Materials and Structures,Vol. 21, 2012,

 

[4] Zhang Y. Cai S.CS. Deng L. Piezoelectric-based energy harvesting in bridge systems, Intelligent Material Systems and Structures, Vol. 25, 2014, pp.1414-1428.

 

[5] Dai X.Z. Wen Y.M, Li P, Yang J, Gao G.Y, Modeling, characterization and fabrication of vibration energy harvester using Terfenol-D/PZT/Terfenol-D composite transducer, Sensors and Actuators, Sensors and Actuators A: Physical volume 156, 2009, pp.350-358

 

[6] Eggborn T. Analytical models to predict power harvesting with piezoelectric materials, Dissertação de Mestrado - Virginia Polytechnic Institute and State University, 2003

 

[7] Erturk A. and Inman D.J. A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters, Journal of Vibration and Acoustics, volume130 2008, page 041002.

 

[8] Fakhzan M.N, Muthalif Asan G.A, Harvesting vibration energy using piezoelectric material: Modeling, simulation and experimental verifications, Mechatronics, volume 23, 2013, pp 61-6

 

 

[9] Ottman G.K, Hofmann H.F, Bhatt A.C, Lesieutre G.A, Adaptive piezoelectric energy harvesting circuit for wireless remote power supply, IEEE Transactions on Power Electronics volume 17,2002, pages 669 to 676.

 

[10] Azizi S, Ghazavi M. R, Rezazadeh G. Ahmadian I, Cetinkaya C, Tuning the primary resonances of a micro resonator using piezoelectric actuation, Nonlinear Dynamics,Vol. 76, 2014, pp. 839-852,

 

 [11]Erturk A, Inman DJ. An experimentallyvalidated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater Struct 2009;18:025009