The Influence of Electromagnetic Vibration on the Microstructure and Corrosion Behavior of Incoloy 825 Superalloy Weld Metal

Journal of Environmental Friendly Materials

مقاله 3، دوره 1، شماره 2، آذر 2017، صفحه 7-13   

نوع مقاله: Original Article

نویسندگان

A. Pourjafar؛ R. Dehmolaei

Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran.

کلیدواژه‌ها

Incoloy 825؛ Microstructure؛ Electromagnetic Vibration؛ Cyclic Polarization؛ Corrosion

مراجع

[1] E. B. Howard and L. G. Timoty, Desk Edition, Metals Handbook, ASM International, United States of America, (1985).

[2] E.F. Bradly, Superalloys A Technical Guide, 2nd Edition, ASM International, Metalspark, OH44073, (1988).

[3] M.J. Donachie, S.J. Donachie, SuperalloysA Technical Guide, 2nd Edition, ASM International, (2002).

[4] J. R. Davis et al, ASM Specialty Handbook:Nickel, Cobalt, and Their Alloys, Printed in the United States of America, (2000).

[5] R. Dehmolaei, M. Shamanian, A. Kermanpur, Mater.Charact., 59(2008), 1447.

[6] JR. Daris, Metallurgical processing and properties of superalloys. ASM handbooks; 16.18–16-23, (1999).

[7] R. Coppola, S. R. Fiorentin, Nucl. Instrum. Methods. Phys. Res., B22(1987), 564.

[8] Special Metals Corporation, Incoloy Alloy 825, Publication Number SMC-030, (2004).

[9] H. Aytekin, Y. Akcin, Mater. Des., 50(2013),515.

[10] J. C. Lippold, Weld. J., 63(1984), 91.

[11] R. S. Dutta, R. Purandare, A. Lobo and S. K. Kulkarni, Corros. Sci., 46(2004), 2937.

[12] S. Kou: Welding metallurgy, second e.d. , Hoboken, John Wiley & Sons Inc, (2003).

[13] T. Bellezze, G. Roventi andR. Fratesi, Electrochim. Acta, 49(2004), 3005.

[14] P. E. Manning, Corrosion, 36(1980), 468.

[15] F. Cardareli, Materials Handbook.A Concise Desktop Reference, Springer-Verlag London, (2008).

[16] H. Mesmar, E. Gajam, F. E. Zrarrog, Int. J. Adv. Technol. Eng. Res., 5(2015).

[17] K. Balasubramanian, S.Raghavendran and V. Balusamy, Int. J. Eng. Tech .Sci., 2(2011),253.

[18] W.F.Savage, E. F. Nipess andE. S. Szekeres, Weld. J., 55(1976), 260.

[19] R. Dehmolaei, M. Shamanian, Mater.Charact., 60(2009) 246.

[20] M. Sireesha, V. Shankar, SK. Albert and S. Sundaresan, Mater. Sci. Eng. A, 292(2000), 74.

[21] L. Sundar and D. R. G. Achar, Indian Weld. J., 16(1984), 81.

[22] B. Pucko, V.Gliha , Metallurgija, 44(2005), 103.

[23] S. Kou, Y. Le, weld. J., 64(1985), 51.

[24] J.N. DuPont, C.V. Robino and A.R. Marder, Metall. Mater. Trans. A, 29(1998), 2797.

[25] ASTM. A167.99. Standard Specification of Stainless and Heat Resistant Chromium Nickel Steel Plate, Sheet, and Strip.

[26]CH. Vives., JOM, 50(1998).

[27] Y. G. Zhao, Y. H. Liang, Q. D. Qin, W. Zhou and Q. C. Jiang, ISIJ Int., 44(2004), 1167.

[28] K. Ralstone, N. Birbilis, Corrosion, 66(2010), 075005.

[29] E. Sikora, X. J. Wei and B. A. Shaw, Corrosion, 60(2004), 387.

[30] T.C. Tsai, T.H. Chuang, Mater. Sci. Eng. A, 225(1997), 135.

[31] D. Song, A. B. Ma, J. H. Jiang, P. H. Lin and D. H. Yang, T. Nonferr. Metal. Soc., 19(2009), 1065.

[32] M. Amra, K. Ranjbar, and R. Dehmolaei, ASM Int., (2015).