Spectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory

Journal of Solid Mechanics

مقاله 4، دوره 9، شماره 3، آذر 2017، صفحه 490-507   

نوع مقاله: Research Paper

نویسندگان

M.R Bahrami؛ S Hatami^*

Civil Engineering Department, Yasouj University, Yasouj, Iran

چکیده

In this paper, the free vibration analysis of moderately thick rectangular plates axially moving with constant velocity and subjected to uniform in-plane loads is investigated by the spectral finite element method. Two parallel edges of the plate are assumed to be simply supported and the remaining edges have any arbitrary boundary conditions. Using Hamilton’s principle, three equations of motion for the plate are developed based on first-order shear deformation theory. The equations are transformed from the time domain into the frequency domain by assuming harmonic solutions. Then, the frequency-dependent dynamic shape functions obtained from the exact solution of the governing differential equations is used to develop the spectral stiffness matrix. By solving a non-standard eigenvalue problem, the natural frequencies and the critical speeds of the moving plates are obtained. The exactness and validity of the results are verified by comparing them with the results in previous studies. By the developed method some examples for vibration of stationary and moving moderately thick plates with different boundary conditions are presented. The effects of some parameters such as the axially speed of plate motion, the in-plane forces, aspect ratio and length to thickness ratio on the natural frequencies and the critical speeds of the moving plate are investigated. These results can be used as a benchmark for comparing the accuracy and precision of the other analytical and numerical methods.

کلیدواژه‌ها

First-order shear deformation theory؛ Spectral finite element method؛ Transverse vibration؛ Axially moving؛ Dynamic stiffness matrix؛ Free vibration

مراجع

[1] Ulsoy A.G., Mote C.D.Jr., 1982, Vibration of wide band saw blades, Journal of Engineering for Industry 104: 71-78.
[2] Lengoc L., McCallion H., 1995, Wide bandsaw blade under cutting conditions, part I: vibration of a plate moving in its plane while subjected to tangential edge loading, Journal of Sound and Vibration 186(1): 125-142.
[3] Wang X., 1999, Numerical analysis of moving orthotropic thin plates, Computers and Structures 70: 467-486.
[4] Luo Z., Hutton S.G., 2002, Formulation of a three-node traveling triangular plate element subjected to gyroscopic and inplane forces, Computers and Structures 80: 1935-1944.
[5] Zhou Y.F., Wang Z.M., 2008, Vibration of axially moving viscoelastic plate with parabolically varying thickness, Journal of Sound and Vibration 316: 198-210.
[6] Tang Y.Q., Chen L.Q., 2011, Nonlinear free transverse vibrations of in-plane moving plates:
without and with internal resonances, Journal of Sound and Vibration 330: 110-126.
[7] An C., Su J., 2014, Dynamic analysis of axially moving orthotropic plates: Integral transform solution , Applied Mathematics and Computation 228: 489-507.
[8] Eftekhari S.A., Jafari A.A., 2014, High accuracy mixed finite element-differential quadrature method for free vibration of axially moving orthotropic plates loaded by linearly varying in-plane stresses, Transactions B: Mechanical Engineering 21(6): 1933-1954.
[9] Lin C.C., 1997, Stability and vibration characteristics of axially moving plates, International Journal of Solids and Structures 34(24): 3179-3190.
[10] Luo A.C.J., Hamidzadeh H.R., 2004, Equilibrium and buckling stability for axially traveling plates, Communications in Nonlinear Science and Numerical Simulation 9: 343-360.
[11] Marynowski K., 2010, Free vibration analysis of the axially moving Levy-type viscoelastic plate, European Journal of Mechanics A/Solids 29: 879-886.
[12] Hatami S., Azhari M., Saadatpour M.M., 2006, Exact and semi-exact finite strip for vibration and dynamic stability of traveling plates with intermediate supports, Advances in Structural Engineering 9(5): 639-651.
[13] Hatami S., Azhari M., Saadatpour M.M., 2006, Stability and vibration of elastically supported, axially moving orthotropic plates, Transaction B, Engineering 30(B4): 427-446.
[14] Hatami S., Azhari M., Saadatpour M.M., 2007, Free vibration of moving laminated composite plates, Composite Structures 80: 609-620.
[15] Hatami S., Ronagh H.R., Azhari M., 2008, Exact free vibration analysis of axially moving viscoelastic plates, Computers and Structures 86: 1738-1746.
[16] Saksa T., Jeronen J., 2015, Estimates for divergence velocities of axially moving orthotropic thin plates, Mechanics Based Design of Structures and Machines: An International Journal 43(3): 294-313.
[17] Oh H., Lee U., Park D.H., 2004, Dynamic of an axially moving Bernouli-Euler beam: spectral element modeling and analysis, KSME International Journal 18(3): 395-406.
[18] Lee U., Kim J., Oh H., 2004, Spectral analysis for the transverse vibration of an axially moving Timoshenko beam, Journal of Sound and Vibration 271: 685-703.
[19] Lee U., Oh H., 2005, Dynamics of an axially moving viscoelastic beam subject to axial tension, International Journal of Solids and Structures 42: 2381-2398.
[20] Kim J., Cho J., Lee U., Park S., 2003, Modal spectral element formulation for axially moving plates subjected to in-plane axial tension, Computers and Structures 81: 2011-2020.
[21] Kwon K., Lee U., 2006, Spectral element modeling and analysis of an axially moving thermoelastic beam-plate, Journal of Mechanics of Materials and Structures 1(1): 605-632.
[22] Reddy J.N., 2007, Theory and Analysis of Elastic Plates and Shells, CRC Press, Boca Raton.
[23] Reissner E., 1994, On the theory of bending of elastic plates, Journal Math Physics 23(4): 184-191.
[24] Lee U., 2009, Spectral Element Method in Structural Dynamics, John Wiley & Sons, Inc.
[25] Hosseini Hashemi Sh., Arsanjani M., 2005, Exact characteristic equations for some of classical boundary conditions of vibrating moderately thick rectangular plates, International Journal of Solids and Structures 42: 819-853.
[26] Boscolo M., Banerjee J.R., 2011, Dynamic stiffness elements and their applications for plates using first order shear deformation theory, Computers and Structures 89: 395-410.
[27] Liew K.M., Xiang Y., Kitipornchai S., 1993, Transverse vibration of thick rectangular plates-I comprehensive sets of boundary conditions, Computers and Structures 49(1): 1-29.