Numerical and experimental analysis of buckling and post buckling in cylindrical shells with circular cutout

Computations and Simulations in Mechanical Science

مقاله 4، دوره 1، شماره 2، آذر 2018، صفحه 24-28   

نوع مقاله: Original Article

نویسندگان

Amir Ghiasvand^* ؛ Hossein Ahmadi rashid

Department of Mechanical Engineering, Tabriz University, Tabriz, Iran

چکیده

Buckling in cylindrical shells has been a major issue for researchers for more than a century. Cylindrical shells are often used in the production of aircrafts, racks, boilers, pipelines, cars, and some submarine structures. These structures may experience axial compression loads in their longevity and yield to buckling. Furthermore, these structures usually have disruptions, such as cutouts, which may have adverse effects on their stability.  In the present paper using finite element method, the buckling of cylinders with circular cutout of AA508 aluminum alloy under loading is investigated. The effect of some geometric parameters such as cutout position and cutout size on the critical load of buckling of these shells was studied. According to the results, with increase in the diameter of cutout the critical load of buckling sharply decreases. The results of the numerical analysis are verified by a series of experimental tests.

کلیدواژه‌ها

Buckling؛ Post-Buckling؛ Cutout؛ FEM Method؛ Aluminium Alloy