Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying

Journal of Advanced Materials and Processing

مقاله 3، دوره 1، شماره 1، فروردین 2013، صفحه 9-16   

نوع مقاله: Research Paper

نویسندگان

S Nazari^{* 1}؛ A Saidi²؛ A Shafyei²

¹Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Isfahan,Iran

²Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran

چکیده

In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N₂ pressure is 5 atm and milling time lasts 5 h, reaction starts and after 10 h, FeTi₂ is completely converted to TiN. Also, the role of graphite as the active material of the reaction was investigated and it was found that it leads to the production of titanium carbonitride in the iron matrix.

کلیدواژه‌ها

Metal Matrix Composite؛ mechanical alloying؛ Combustion synthesis؛ Titanium Nitride؛ Titanium Carbonitride