Adsorption of chloroform from aqueous solution by nano -TiO2

International Journal of Nano Dimension

مقاله 8، دوره 1، شماره 4، شهریور 2011، صفحه 287-296   

نوع مقاله: Reasearch Paper

شناسه دیجیتال (DOI): 10.7508/ijnd.2010.04.007

نویسندگان

P. Gharbani^{* 1}؛ S.M. Tabatabaei¹؛ S. Dastmalchi²؛ S. Ataie³؛ A. Mosenharzandi⁴؛ A. Mehrizad⁵

¹Department of chemistry, Ahar Branch- Islamic Azad University, Ahar, Iran.

²2Biotechnology Research Center,Tabriz University of Medical Science,Tabriz,Iran.

³M.Sc. student, Department of chemistry, Ahar Branch-Islamic Azad University, Ahar, Iran.

⁴Quality Control Lab, Water & Wastewater Co., Abiary Street, Elgoli Road, Tabriz, Iran.

⁵Department of Chemistry, Science and Research Branch-Islamic Azad University, Tabriz, Iran.

چکیده

In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the solution pH was the key parameter affecting the adsorption characteristics. It was found that the adsorption efficiency of chloroform was more at pH 8.0. Results showed that the initial adsorption rate was increased with the increasing nano-TiO2 dosage and decreasing initial chloroform concentration. Equilibrium data were fitted to Langmuir, Freundlich and Temkin isotherms. The Langmuir isotherm was found to be the best fitting isotherm model. The adsorption kinetic data were analyzed using pseudo-first-order and pseudo-second-order. It was found that the pseudo-second-order kinetic model was the most appropriate model, describing the adsorption kinetics.

کلیدواژه‌ها

Chloroform؛ Nano-TiO2؛ Adsorption؛ Kinetics؛ Isotherm

مراجع