Study of the flexural sensitivity and resonant frequency of an inclined AFM cantilever with sidewall probe

International Journal of Nano Dimension

مقاله 4، دوره 6، شماره 4، دی 2015، صفحه 351-362   

نوع مقاله: Reasearch Paper

شناسه دیجیتال (DOI): 10.7508/ijnd.2015.04.003

نویسنده

M. Abbasi^*

School of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran.

چکیده

The resonant frequency and sensitivity of an atomic force microscope (AFM) cantilever with assembled cantilever probe (ACP) have been analyzed and a closed-form expression for the sensitivity of vibration modes has been obtained. The proposed ACP comprises an inclined cantilever and extension, and a tip located at the free end of the extension, which makes the AFM capable of topography at sidewalls of microstructures. Because the extension is not exactly located at one end of the cantilever, the cantilever is modeled as two beams. In this study, the effects of the interaction stiffness and damping, and also some geometrical parameters of the cantilever on the resonant frequencies and sensitivities are investigated. Afterwards, the influence of the interaction stiffness and damping, and the geometrical parameters such as the angles of the cantilever and extension, the connection position of the extension and the ratio of the extension length to the cantilever length on the sensitivity and resonant frequency are investigated. The results show that the greatest flexural modal sensitivity occurs at a small contact stiffness of the system, when the connection position and damping are also small. The results also indicate that at low values of contact stiffness, an increase in the cantilever slope or a decrease in the angle between the cantilever and extension can rise the resonant frequency while reduces the sensitivity.

کلیدواژه‌ها

Atomic force microscope؛ Assembled cantilever probe؛ Inclined cantilever؛ Resonant frequency؛ Sensitivity

مراجع

[1]      Mazeran P. E., Loubet J. L., (1999), Normal and lateral modulation with a scanning force microscope, an analysis: implication in quantitative elastic and friction imaging. Tribology Lett. 7: 199-212.

[2]      Garcia R., (2010), Amplitude Modulation Atomic Force Microscopy, First ed., Germany: Wiley-VCH.

[3]      Albrecht T. R., Akamine S., Carver T. E., Quate C. F., (1990), Microfabrication of cantilever for the atomic force microscope. J. Vac. Sci. Technol. A-Vac. Surf. Films. 8: 3386–3396.

[4]      Chang C. T., Lin K., Ju M. S., (2013), Combine atomic force and fluorescence microscopies to measure subcellular mechanical properties of lives cells. J. Mech. Medic. Biol. 13: 1350057-9

[5]      Wu T.-S., Chang W.-J., Hsu J.-C., (2004), Effect of tip length and normal and lateral contact stiffness on the flexural vibration responses of atomic force microscope cantilevers. Microelec. Eng. 71: 15-20.

[6]      Kahrobaiyan M. H., Asghari M., Rahaeifard M., Ahmadian M. T., (2010), Investigation of the size-dependent dynamic characteristics of atomic force microscope microcantilevers based on the modified couple stress theory. Int. J. Eng. Sci. 48: 1985-1994.

[7]      Korayem M. H., Ebrahimi N., Sotoudegan M. S., (2011), Frequency response of atomic force microscopy microcantilevers oscillating in a viscous liquid: A comparison of various methods. Scientia Iranica. 18: 1116-1125.

[8]      Abbasi M., Karami Mohammadi A., (2009), Effect of contact position and tip properties on the flexural vibration responses of atomic force microscope cantilevers. IREME. 3: 196-202.

[9]      Georgakaki D., Mitridis S., Sapalidis A. A., Mathioulakis E., Polatoglou H. M., (2013), Calibration of tapping AFM cantilevers and uncertainty estimation: Comparison between different methods. Meas. Sci. Tech. 46: 4274-4281.

[10]  Chang W., (2002), Sensitivity of Vibration Modes of Atomic Force Microscope Cantilevers in Continuous Surface Contact. Nanotechnol. 13: 510-514.

[11]  Abbasi M., Karami Mohammadi A., (2010), A new model for investigating the flexural vibration of an atomic force microscope cantilever. Ultramicroscopy. 110: 1374-1379.

[12]  Chang W.-J., Fang T.-H., Chou H.-M., (2003), Effect of interactive damping on sensitivity of vibration modes of rectangular AFM cantilevers. Phys. Lett.  A. 312: 158-165.

[13]  Mahdavi M. H., Farshidianfar A., Tahani M., Mahdavi S., Dalir H., (2008), A more comprehensive modeling of atomic force microscope cantilever. Ultramicroscopy. 109: 54-60.

[14]  Lee H. W., Chang W. J., (2008), Coupled lateral bending–torsional vibration sensitivity of atomic force microscope cantilever. Ultramicroscopy. 108: 707–711.

[15]  Lin S. M., (2010), Effective dampings and frequency shifts of several modes of an inclined cantilever vibrating in viscous fluid. Precis. Eng. 34: 320-326.

[16]  Korayem M. H., Kavousi A., Ebrahimi N., (2011), Dynamic analysis of tapping-mode AFM considering capillary force interactions. Sci. Iranica. 18: 121-129.

[17]  Abbasi M., Afkhami S. E., (2015), Resonant Frequency and Sensitivity of a Caliper Formed With Assembled Cantilever Probes Based on the Modified Strain Gradient Theory. Micros. Microanal. 20:1672–1681.

[18]  Dai G., Wolff H., Pohlenz F., Danzebrink H. U., Wilkening G., (2006), Atomic force probe for sidewall scanning of nano- and microstructures. Appl. Phys. Lett. 88: 171908-11.

[19]  Chang W. J., Lee H. L., Chen T. Y., (2008), Study of the sensitivity of the first four flexural modes of an AFM cantilever with a sidewall probe. Ultramicroscopy. 108: 619-24.

[20]  Abbasi M., Karami Mohammadi A., (2014), A Detailed Analysis of the Resonant Frequency and Sensitivity of Flexural Modes of Atomic Force Microscope Cantilevers with a Sidewall Probe Based on a Nonlocal Elasticity Theory. Strojniški vestnik – J. Mech. Eng. 60: 179-186.

[21]  Kahrobaiyan M. H., Ahmadian M. T., Haghighi P., Haghighi A., (2010), Sensitivity and resonant frequency of an AFM with sidewall and top-surface probes for both flexural and torsional modes. Int. J. Mech. Sci. 52: 1357-1365.

[22]  Dai G., Wolff H., Weimann T., Xu M., Pohlenz F., Danzebrink H. U., (2007), Nanoscale surface measurements at sidewalls of nano- and micro-structures. Meas.  Sci. Technol. 18: 334-341.

[23]  Beer F. P., Johnston E. R. (1981). Mech. Mater. New York: McGraw-Hill.

[24]  Turner J. A., Wiehn J. S., (2001), Sensitivity of Flexural and Torsional Vibration Modes of Atomic Force Microscope Cantilevers to Surface Stiffness Variation. Nanotechnol. 12: 322-330.