A novel study on the stepwise electrodeposition approach for the synthesis of Pd based nanoparticles, characterization, and their enhanced electrooxidation activities

International Journal of Nano Dimension

مقاله 3، دوره 9، شماره 1، اردیبهشت 2018، صفحه 15-23   

نوع مقاله: Reasearch Paper

نویسندگان

Caglar Avci¹؛ Fazile Cicek¹؛ Hilal Celik Kazici¹؛ Arif Kivrak²؛ Hilal Kivrak^{* 1}

¹Chemical Engineering Department, Yüzüncü Yıl University, Van, 65000, Turkey.

²Department of Chemistry, Yüzüncü Yıl University, Van, 65000, Turkey.

چکیده

Herein, a stepwise electrodeposition technique was used to synthesize the Pd based nanoparticles on indium-tin oxide (ITO) electrodes. First of all, Pd nanoparticles were electrodeposited on ITO via one step electrodeposition technique. Furthermore, Au was electrodeposited on Pd. Finally, Co was electrodeposited on Au and Pd electrodeposited ITO electrode via stepwise electrodeposition technique. Characterization of these electrodes was performed by x-ray diffraction (XRD) and scanning electrode microscopy (SEM) techniques. Considering the XRD pattern, well-defined ITO peaks, Pd, and Au fcc structure peaks are clearly visible for Pd based electrodes. On the other hand, Co has two main crystal structures such as face-centered-cubic (fcc) and hexagonal close-packed (hcp) phases. SEM images illustrates that spherical particles were obtained for these Pd based electrodes. Finally, formic acid electrooxidation activities of these electrodes were evaluated and enhanced electrooxidation activities were obtained.

کلیدواژه‌ها

Au؛ Co؛ Electrodeposition؛ nanoparticles؛ Pd؛ Trimetallic

مراجع

[1] Yu X., Pickup P. G., (2011), Screening of PdM and PtM catalysts in a multi-anode direct formic acid fuel cell. J. Appl. Electrochem. 41: 589-597.

[2] Ohkubo Y., Shibata M., Kageyama S., Seino S., Nakagawa T., Kugai J., Nitani H., Yamamoto T. A., (2013), Carbon-supported AuPd bimetallic nanoparticles synthesized by high-energy electron beam irradiation for direct formic acid fuel cell. J. Mater. Sci. 48: 2142-2150.

[3] Uhm S., Chung S. T., Lee J., (2007), Activity of Pt anode catalyst modified by underpotential deposited Pb in a direct formic acid fuel cell. Electrochem. Commun. 9: 2027-2031.

[4] Chen W., Tang Y. W., Bao J. C., Gao Y., Liu C. P., Xing W., Lu T. H., (2007), Study of carbon-supported Au catalyst as the cathodic catalyst in a direct formic acid fuel cell prepared using a polyvinyl alcohol protection method. J. Power Sources. 167: 315-318.

[5] Ha S., Adams B., Masel R. I., (2004), A miniature air breathing direct formic acid fuel cell. J. Power Sources. 128: 119-124.

[6]  Weber M., Wang J. T., Wasmus S., Savinell R. F., (1996), Formic acid oxidation in a polymer electrolyte fuel cell - A real-time mass-spectrometry study. J. Electrochem. Soc. 143: L158-L160.

[7] Wang Z. L., Yan J. M., Ping Y., Wang H. L., Zheng W. T., Jiang Q., (2013), An efficient CoAuPd/C catalyst for hydrogen generation from formic acid at room temperature. Angew. Chem. Int. Ed. 52: 4406-4409.

[8] Yin M., Li Q., Jensen J. O., Huang Y., Cleemann L. N., Bjerrum N. J., Xing W., (2012), Tungsten carbide promoted Pd and Pd-Co electrocatalysts for formic acid electrooxidation. Angew. Chem. Int. Ed. 219: 106-111.

[9] Mehta S. K., Gupta S., (2013), Synthesis of Au-Pd alloy nanoparticles and their catalytic activity in the electrooxidation of formic acid and lower alcohols in alkaline media. Sci. Adv. Mater.5: 1377-1383.

[10] Mikolajczuk A., Borodzinski A., Stobinski L., Kedzierzawski P., Lesiak B., Laszlo K., Jozsef T., Lin H.-M., (2010), Study of Pd-Au/MWCNTs formic acid electrooxidation catalysts. Phys. Status Solidi. B. 247: 2717-2721.

[11] Suo Y., Hsing I. M., (2009), Size-controlled synthesis and impedance-based mechanistic understanding of Pd/C nanoparticles for formic acid oxidation. Electrochim. Acta. 55: 210-217.

[12] Du C. Y., Chen M., Wang W. G., Yin G. P., (2011), Nanoporous PdNi alloy nanowires as highly active catalysts for the electro-oxidation of formic acid. ACS Appl. Mater. Interf. 3: 105-109.

[13] Maiyalagan T., Wang X., Manthiram A., (2014), Highly active Pd and Pd-Au nanoparticles supported on functionalized graphene nanoplatelets for enhanced formic acid oxidation. RSC Advances.  4: 4028-4033.

[14] Jiang Y. Y., Lu Y. Z., Han D. X., Zhang Q. X., Niu L., (2012), Hollow Ag@Pd core-shell nanotubes as highly active catalysts for the electro-oxidation of formic acid. Nanotech. 23: 105609-105615.

[15] Liu X. Y., Dai C. Q., Wu D. F., Fisher A., Liu Z. P., Cheng D. J., (2016), Facile synthesis of PdAgCo trimetallic nanoparticles for formic acid electrochemical oxidation. Chem. Lett. 45: 732-734.

[16] Kim B. K., Seo D., Lee J. Y., Song H., Kwak J., (2010), Electrochemical deposition of Pd nanoparticles on indium-tin oxide electrodes and their catalytic properties for formic acid oxidation. Electrochem. Commun. 12: 1442-1445.

[17] Tang J., Tian X. C., Pang W. H., Liu Y. Q., Lin J. H., (2012), Codeposition of AuPd bimetallic nanoparticles on to ITO and their electrocatalytic properties for ethanol oxidation. Electrochim. Acta. 81: 8-13.

[18] Agbolaghi S., Nazari M., Zenoozi S., Abbasi F., (2017), The highest power conversion efficiencies in poly(3- hexylthiophene)/fullerene photovoltaic cells modified by rod-coil block copolymers under different annealing conditions. J. Mater. Sci: Mater. Electron. 28: 10611–10624.

[19] Agbolaghi S., Abbasi F., Zenoozi S., Nazari M., (2017), Annealing-free multi-thermal techniques comprising aging, cycling and seeding to enhance performance of thick P3HT: PCBM photovoltaic cells via developing hairy crystals. Mater. Sci. Semicond. Process. 63: 285-294.

[20] Agbolaghi S., Abbasi F., Gheybi H., (2016), High efficient and stabilized photovoltaics via morphology manipulating in active layer by rod-coil block copolymers comprising different hydrophilic to hydrophobic dielectric blocks. Europ. Polym. J. 84: 465–480.

[21] Lepenven R., Levason W., Pletcher D., (1990), Studies of the electrodeposition of palladium from baths based on PD(NH₃)₂X₂ salts. J. Appl. Electrochem. 20: 399-404.

[22] Li J. D., Tian Q. F., Jiang  S. Y., Zhang Y., Wu Y. X., (2016), Electrocatalytic performances of phosphorus doped carbon supported Pd towards formic acid oxidation.Electrochim. Acta. 213: 21-30.

[23] Miyake H., Okada T., Samjeske G., Osawa M., (2008), Formic acid electrooxidation on Pd in acidic solutions studied by surface-enhanced infrared absorption spectroscopy. Phys. Chem. Chem. Phys. 10: 3662-3669.