Effect of Zn and porosity on the biodegradability and Mechanical Properties of Mg-Zn Scaffolds

Journal of Advanced Materials and Processing

مقاله 6، دوره 6، شماره 4، اسفند 2018، صفحه 42-52   

نوع مقاله: Research Paper

نویسنده

zahra sadat seyedraoufi^*

Department of Materials Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran

چکیده

In the present research porous Mg-Zn scaffolds with different Zn amount and porosities were synthesized by powder metallurgy process as potential degradable materials for orthopedic applications. The microstructures, composition, mechanical properties and in vitro biodegradability of the scaffolds were investigated. Optic microscopy (OM) images showed that the Mg-Zn scaffolds exhibit homogeneously distributed and interconnected pores with the size of about 150–400 µm. The X-ray diffractometer (XRD) results indicated the formed intermetallics consist of Mg12Zn13 and Mg51Zn20 in the Mg matrix. Compressive tests showed that decrease of porosity and the addition of Zn increases the compressive strength of specimens. Electrochemical tests indicated that with increase of porosity, the corrosion current density of scaffolds increased and Mg-Zn scaffolds synthesized improved the in vitro biodegradability property of the Mg; the best biodegradability property was obtained with 3% Zn and the porosity of about 7% ; further increase of Zn content up 4% deteriorates biodegradability. It is found that the products of immersion in simulated body fluid (SBF) are identified to be HAP, (Ca,Mg)3(PO4)2 and Mg(OH)2 and MG63 cells adhere and proliferate on the surface of the scaffolds, making them a promising choice for orthopedic application.

کلیدواژه‌ها

Porous Scaffold؛ Mg-Zn؛ Mechanical Properties؛ In Vitro biodegradability؛ Powder Metallurgy