Dynamic Envelope and Control Shading Pattern for Office Buildings Visual Comfort in Tehran

Space Ontology International Journal

مقاله 8، دوره 8، شماره 3 - شماره پیاپی 30، آذر 2019، صفحه 31-40   

نوع مقاله: Original Article

نویسندگان

Nasim Fazeli؛ Mohammadjavad Mahdavinejad^* ؛ Mohammadreza Bemanian

Department of Architecture, Faculty of Art and Architecture, Tarbiat Modares University, Tehran, Iran

چکیده

This work reviews the effect of parametric programming on visual performance, daylighting and shading in office buildings in Tehran-Iran and studies their influences that help not only to reduce the glare but also to promote useful daylight illuminance through promoting visual comfort. It starts by establishing a review of the effective parameters on visual comfort indices, glare indices, and daylight metrics. The aim of the study was to characterize the impact of innovative, dynamic envelope design strategy to control shading pattern.
The method used in this research is computer configuration and simulation. To parametric modeling and analysis used Rhinoceros, Grasshopper and its plug-in ladybug, honeybee, honeybee plus and daylight performance on visual comfort, as well as the impact on the best dynamic envelope option for a three-occupant office.
The results show that the dynamic responsive to sun envelope often very efficiently effect on the occupants' visual comfort indices than the static envelope. They further show that this efficient envelope minimizes the percentage of upper useful daylight illuminance (UDI) and minimize the discomfort glare probability (DGP) for keeping an indoor glare-free environment.

کلیدواژه‌ها

Control Shading Pattern؛ Dynamic Envelope؛ Visual Comfort؛ Office Building؛ Tehran

مراجع

1. A.A.Nazzal, A. (2000). A New Daylighting Glare Evaluation Method. Light and Visual Environment, 24, 19-27.
2. Carlucci S, C. F. (2015). A review of indices for assessing visual comfort with a view to their use in optimization processes to support building integrated design. Renewable and Sustainable Energy Reviews, 47, 1021.
3. Correia Da Silva P et al. (2012). Influence Of Shading Control Patterns On The Energy Assessment Of Office Spaces. Energy and Buildings, 50, 35-48.
4. Dubois D, Dubois EF. (1989). A Formula to Estimate Approximate Surface Area. Archives of International Medicine, 17, 303-311.
5. Erlendsson, O. (2014). Daylight optimization: A parametric study of Atrium Design, master of science of architecture thesis.
6. Favoino F, F. F. (2016). Optimal control and performance of photovoltachromic switchable glazing for building integration in temperate climates. Applied Energy, 178, 943–961.
7. Foster M, Oreszczyn T. (2001). Occupant Control of Passive Systems: The Use of Venetian Blinds. Building and Environment, 36, 149-155.
8. Galasiu, A. D., & Veitch, J. A. (2006). Occupant Preferences and Satisfaction with the Luminous Environment and Control Systems in Daylit Offices: A Literature Review. Energy and Buildings, 38, 728-742.
9. Ghiabaklou, Z. (2013). Fundamentals of Building Physics 2 Environmental Control. Tehran: Jahad of Amir Kabir University.
10. Heidari.sh. (2012). Architecture and lighting. TEHRAN: Tehran University.
11. Iwata, T. a. (1994). Visual Comfort in the Daylit Luminous Environment: Structural Model for Evaluation. Lighting Research and Technology(2), 26, 91–97.
12. Kapsis, K., Tzempelikos, A., Athienitis, A., & Zmeureanu, R. (2010). Daylighting Performance Evaluation of A Bottom-up Motorized Roller Shade. Solar Energy, 84, 2120–2131.
13. Kim, G. & et al. (2012). The comparative advantage of an exterior shading device in thermal performance for residential buildings. Energy and Environment, 46.
14. Kim, W., & Kim, J. (2010). Effect of Background Luminance on Discomfort Glare in Relation to the Glare Source Size. Indoor and Built Environment, 19, 175 – 183.
15. Konis, K. (2013). Evaluating daylighting effectiveness and occupant visual comfort in a side-lit open-plan office building in San Francisco, California. In Building and Environment, 59, 662–677.
16. Krarti, Moncef. (2011). Energy audit of building systems. (2. edition, Ed.) United States: CRC Press.
17. Kreider J.F. (2000). Handbook of heating, ventilation and air conditioning. Washington DC, New York: CRC Press.
18. Lavina C, Fioritob F. (2017). Optimization of an external perforated screen for improved daylighting and thermal performance of an office space. Procedia Engineering, 180, 571-581.
19. Leach, N. (2009). Digital morphogenesis. Architectural Design, 79, 32–37.
20. Newsham G. (2003). Making the Open-Plan Office a Better Place to Work. In Construction Technology Update, 60, 30.
21. Newsham, G., & Arsenault, C. (2009). A camera as a sensor for lighting and shading control. Lighting Research & Technology, 41(2).
22. Newsham, G., & Veitch, J. (1998). Individual Control over Office Lighting: Perceptions, Choices and Energy Savings. In Construction Technology Update, 21.
23. Newsham, G.R.and others. (2004). Lighting Design for Open-Plan Offices. In Construction Technology Update, 62, 4.
24. Olgyay, A., & Olgyay, V. (1957). Solar control and shading devices. Princeton University Press (London: Oxford University Press).
25. Pérez-Lombard L. (2008). A review on buildings energy consumption information. Energy and Buildings, 40(3), 394–398.
26. Pesentia M , Maseraa G, Fioritob F. (2015). Shaping an Origami shading device through visual and thermal. Energy Procedia, 78, 346 – 351.
27. Schlueter A, Thesseling F. (2009). Building information model based energy/energy performance assessment in early design stages, Automation in Construction. 18, 153–163.
28. Wienold J, C. J. (2006). Evaluation methods and development of a new glare prediction model for daylight environments with the use of CCD cameras. Energy and Buildings, 38, 743–757.
29. Williams, W. (1999). Footcandles and lux for architectural lighting, an introduction to illuminance. Retrieved from http://www.mts.net/williams5/library/illum.htm.