Peak Electric Load and Related Damages Reduction with the Use of ‎Cooling Ceramics

Journal of Applied Dynamic Systems and Control

مقاله 5، دوره 2، شماره 1، شهریور 2019، صفحه 31-36   

نوع مقاله: Original Article

نویسندگان

A. SharifYazdi‎^{* 1}؛ J. Mirjalili‎²؛ S. Salehi³

¹Yazd Regional Electricity Company, Solar Research Center, Yazd, ‎Iran‎

²Yazd Regional Electricity Company, Solar Research Center, Yazd, ‎Iran.‎

³Yazd Regional Electricity Company, Solar Research Center, Yazd, Iran

چکیده

Power outages values are estimated to be between 100 to 150 costly more than the value of electrical energy and; the lack of electricity for industrial, commercial and even household customers has various political, security as well as social consequences. The shortage of hydroelectric power and the financial resources to build new power plants caused the summer black-out of the year 1397. The Department of Energy's set of conditions and warnings about the likelihood of escalation in the summer of 98 have drawn serious attention to the consumption pattern correction approach to reduce peak load. Since about 40% of peak load is used for cool buildings, any modification of the cooling pattern will play a decisive role in reducing the peak load. This paper presents a personal contact cooling method (PCCM) using cool, very low cost, one-hundredths of the cost of the practical capacity of the power plant in Peak- bar, without the need for electricity and with very low water consumption. This approach is simple and can be expressed as follows. First humidifies the bricks. These produces fresh and cool air which can by touch /feel externally, be transferred to the cooling of the blood flow and cooling the body internally, and given the evolving experiences, it can provide a significant portion of the cooling need. The use of cool ceramic can reduce production capacity by 1-4 GW by maintaining thermal comfort. In the absence of electricity, this amount of reductions reduces about160 billion riyals of blackout per gigawatt. In the paper's proposed option for the release of one GW (1000 MW) of plant's operational capacity at Peak-bar, the value of the released capacity is approximately 100,000 billion rails. It is also possible to provide people with a part of the cooling power during a power outage.

کلیدواژه‌ها

Air cooling؛ personal cooling؛ cooling ceramic؛ blackout damage؛ consumption reduction of ‎electrical energy.‎

مراجع

 [1] Vahid Marvasti, Reduction of distribution network losses by optimal selection of conductors and capacitor banks by considering harmonic sources, Ms. Thesis, Amirkabir University of Technology, 2008. ( In Persian)

 

[2] R. Ghajar, R. Billinton, “Economic costs of power interruptions: a consistent model and methodology” Electrical Power and Energy System, pp. 29-35, 2006.

[3] H. Radhi, “Evaluating the potential impact of global warming on the UAE residential buildings – a contribution to reduce the CO2 emissions” Build. Environ, Vol. 44, pp. 2451-2462, 2009.

[4] K. Chua, S. Chou, W. Yang and J. Yan, “Achieving better energy-efficient air conditioning – a review of technologies and strategies” Appl. Energy, Vol. 104, pp. 87-104, 2013.

[5] H. Tyler, E. Arens, and H. Zhang. “Extending air temperature setpoints: Simulated energy savings and design considerations for new and retrofit buildings” Building and Environment, Vol. 88, pp. 89-96, 2015.

[6] Z. Hui, E. Arens, D. Kim, E. Buchberger, F. Bauman and C.  Huizenga “Comfort, perceived air quality, and work performance in a low-power task–ambient conditioning system” Building and Environment, Vol. 45, No. 1, pp. 29-39, 2010.

[7] A. Makhoul, K. Ghali and N. Ghaddar, “Desk fans for the control of the convection flow around occupants using ceiling mounted personalized ventilation” Building and Environment, Vol. 59, pp. 336-348, 2013.

[8] W. Chakroun, N. Ghaddar and K. Ghali, “Chilled ceiling and displacement ventilation aided with personalized evaporative cooler” Energy and buildings, Vol. 43, No. 11, pp. 3250-3257, 2011.

[9] S. Stefano, K. Arsen, “Energy saving and improved comfort by increased air movement” Energy and buildings, Vol. 40, No. 10, pp. 1954-1960, 2008.

[10] Y. Bin, S. Schiavon, C. Sekhar, D. Cheong, K. Wai Tham and W. Nazaroff, “Cooling efficiency of a brushless direct current stand fan” Building and Environment, Vol. 85, pp. 196-204, 2015.

[11] H. Tyler, K. Ho Lee, H. Zhang, E. Arens and T. Webster, “Energy savings from extended air temperature setpoints and reductions in room air mixing” 2005.

[12] P. Wilmer, H. Zhang, E. Arens, S. Kaam and Y. Zhai, “Effect of a heated and cooled office chair on thermal comfort” HVAC&R Research, Vol. 15, No. 5, pp. 574-583, 2013.

[13] M. Attia, P. Engel, “Thermal alliesthesial response in man is independent of skin location stimulated” Physiology & behavior, Vol. 27, No. 3, pp. 439-444, 1981.

 [14] D. George, “Perceived intensity of peripheral thermal stimuli is indepen-dent of internal body temperature.” Journal of comparative and physiological psychology, Vol. 90, No. 12, pp. 1152, 1976.

[15] Z. Hui, Ch. Huizenga, E. Arens and D. Wang, “Thermal sensa-tion and comfort in transient non-uniform thermal environments” European journal of applied physiology, Vol. 92, No. 6, pp. 728–733, 2004

[16] Z. Hui, “Human thermal sensation and comfort in transient and non-uniform thermal environments” PhD thesis. UC Berkeley, 2003.

[17] F. David, “Developing low-energy personal thermal comfort systems: design, performance, testing, and research methods” 2015.