Optimal Sizing and Location of Distributed Generation Units to ‎Improve Voltage Stability and Reduce Power Loss in the Distribution ‎System

Journal of Applied Dynamic Systems and Control

مقاله 7، دوره 2، شماره 1، شهریور 2019، صفحه 41-47   

نوع مقاله: Original Article

نویسندگان

M. Kazeminejad^* ؛ M. Ghaffarianfar؛ A. Hajizadeh

Department of Electrical and robotic Engineering, Shahrood ‎University of Technology, Shahrood, Iran. ‎

چکیده

Voltage stability improvement, when overloading of current distribution network is leading it toward voltage collapse, has been deemed as an important criteria in networks including distributed generation units (DGs) as part of it. In this condition, DGs can be leveraged to improve reactive power through voltage control and thus, stabilizing network with respect to the voltage. In this paper, a forward-backward power flow with respect to a voltage stability index (VSI), optimal size and location of DGs within the network are to found. The proposed method are simulated on the 34-bus IEEE standard in order to cross validate the results.

کلیدواژه‌ها

Voltage stability؛ forward-backward power flow؛ distributed generation؛ distribution network.‎

مراجع

[1] P. Kessel and H. Glavitsch, 1986, Estimating the voltage stability of a power system, IEEE Transactions on Power Delivery, vol. 1, pp. 346-354.

[2] M. Moghavvemi and M. Faruque, 2001, Technique for assessment of voltage stability in ill-conditioned radial distribution network, Power Engineering Review, IEEE, vol. 21, pp. 58-60.

[3] A. Chebbo, et al.,1992, Voltage collapse proximity indicator: behavior and implications, IEE Proceedings in Gener., Trans. and Distr., pp. 241-252.

[4] M. Eidiani, 2011, A reliable and efficient method for assessing voltage stability in transmission and distribution networks, International Journal of Electrical Power & Energy Systems, vol. 33, pp. 453-456.

[5] T. Ackermann, et al., 2001, Distributed generation: a definition, Electric Power Systems Research, vol. 57, pp. 195-204.

[6] R. Viral and D. Khatod, 2012, Optimal planning of distributed generation systems in distribution system: A review, Renewable and Sustainable Energy Reviews, vol. 16, pp. 5146-5165.

[7] Electric Power Research Institute (EPRI), 1993. Technical Assessment Guide, ed: TR Patent 102,276.

[8] N. Khalesi, et al., 2011, DG allocation with application of dynamic programming for loss reduction and reliability improvement, International Journal of Electrical Power & Energy Systems, vol. 33, pp. 288-295.

[9] N. S. Rau and Y. Wan, 1994, Optimum location of resources in distributed planning, IEEE Transactions on Power Systems, vol. 9, pp. 2014-2020.

[10] H. Hedayati, et al., 2008, A method for placement of DG units in distribution networks, IEEE Transactions on Power Delivery, vol. 23, pp. 1620-1628.

[11] J. Jamian, et al., 2012, Comparative Study on Distributed Generator Sizing Using Three Types of Particle Swarm Optimization, International Conference on Intelligent Systems, Modelling and Simulation, pp. 131-136.

[12] M. Moradi and M. Abedini, 2011, A combination of genetic algorithm and particle swarm optimization for optimal DG location and sizing in distribution systems, International Journal of Electrical Power & Energy Systems, vol. 34, pp. 66-74.

[13] C. L. T. Borges and D. M. Falcao, 2006, Optimal distributed generation allocation for reliability, losses, and voltage improvement, International Journal of Electrical Power & Energy Systems, vol. 28, pp. 413-420.

[14] K. H. Kim, et al.,2002, Dispersed generator placement using fuzzy-GA in distribution systems, Power engineering Society summer meeting, IEEE, vol. 3, pp. 1148-1153.

[15] A. Abou El-Ela, et al., 2010, Maximal optimal benefits of distributed generation using genetic algorithms, Electric Power Systems Research, vol. 80, pp. 869-877.

[16] C. A. Cañizares, 1998, Applications of optimization to voltage collapse analysis, IEEE/PES Summer meeting, San Diego, July 14.

[17] Rajkumar Viral, D.K.Khatod, 2012, Optimal planning of distributed generation systems in distribution system: A review, Renewable and Sustainable Energy Reviews 16, pp. 5146–5165.

[18] A. Wiszniewski, 2007, New criteria of voltage stability margin for the purpose of load shedding, IEEE Transactions on Power Delivery, vol. 22, pp. 1367-1371.

[19] K. V. Kumar and M. Selvan, 2008, A simplified approach for load flow analysis of radial distribution network, International Journal of Computer, Information, and Systems Science, and Engineering, vol. 2, p. 4.

[20] W. Wu and B. Zhang, 2008, A three-phase power flow algorithm for distribution system power flow based on loop-analysis method, International Journal of Electrical Power & Energy Systems, vol. 30, pp. 8-15.

[21] N. Mwakabuta, A. Sekar, 2007, Comparative Study of the IEEE 34 Node Test Feeder under Practical Simplifications, 39th North American Power Symposium, IEEE.