Ultrasonic-assisted solvothermal synthesis of self-assembled Copper Ferrite nanoparticles

International Journal of Nano Dimension

مقاله 4، دوره 11، شماره 2، تیر 2020، صفحه 130-144   

نوع مقاله: Reasearch Paper

نویسندگان

Ahmad Reza Abbasian^{* 1}؛ Samira sadat Hosseini²؛ Masoud Shayesteh²؛ Mahdi Shafiee¹؛ Masoud Rafigh Esmaeilzaei³

¹Department of Materials Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan, Iran.

²Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan, Iran.

³Department of Chemistry, Faculty of Sciences, University of Sistan and Baluchestan, Zahedan, Iran.

چکیده

The aim of this work was to characterize copper ferrite nanoparticles synthesized via solvothermal method and to investigate the effects of ultrasonic waves on the synthesis efficiency. Crystal structure, functional groups, microstructure, particle size, magnetic properties, specific surface area, porosity distribution and photocatalytic activity of the synthesized nanoparticles were also investigated. Structural analyses revealed that nanostructured copper ferrites with spinel crystal structure have been successfully synthesized via both solvothermal and ultrasonic-assisted solvothermal methods. The powders contained submicron spheres which were consisted of nanoparticles with regular arrangement. The applied ultrasonic wave had significant effect on the shape and size of the spheres, particularly on their specific surface area, but it had no considerable effect on the magnetic properties. All the synthesized powders were superparamagnetic and their band gap energy was about 1.5 eV. High absorption rate is another unique characteristic of the powders so that it can complete the photocatalytic process in less than 10 min. The saturation magnetization of about 47 emu/g, together with negligible coercivity, make the synthesized nanostructured absorbent ideal for magnetic separation processes.

کلیدواژه‌ها

Copper Ferrite؛ Methyl Orange؛ Photocatalyst؛ Solvothermal؛ Superparamagnetic؛ Ultrasonic Waves

مراجع

[1] Holkar C. R., Jadhav A. J., Pinjari D. V., Mahamuni N. M., Pandit A. B., (2016), A critical review on textile wastewater treatments: Possible approaches. J. Environ. Manage. 182: 351-366.

[2] Raval N. P., Shah P. U., Shah N. K., (2016), Adsorptive amputation of hazardous azo dye Congo red from wastewater: A critical review. Environ. Sci. Pollut. Res. 23: 14810-14853.

[3] Tadjarodi A., Imani M., (2016), Synthesis of porous CdO sheet-like nanostructure based on soft template model and its application in dye pollutants adsorption. Int. J. Nano Dimens. 7: 150-159.

[4] Hosseini S. A., Davodian0 M., Abbasian A. R., (2017), Remediation of phenol and phenolic derivatives by catalytic wet peroxide oxidation over Co-Ni layered double nano hydroxides. J. Taiwan. Inst. Chem. E, 75: 97-104.

[5] Chekir N., Benhabiles O., Tassalit D., Laoufi N. A., Bentahar F., (2016), Photocatalytic degradation of methylene blue in aqueous suspensions using TiO₂ and ZnO. Desalin. Water Treat. 57: 6141-6147.

[6] Li S., Chen J., Liu Y., Xu K., Liu J., (2019), In situ anion exchange strategy to construct flower-like BiOCl/BiOCOOH p-n heterojunctions for efficiently photocatalytic removal of aqueous toxic pollutants under solar irradiation. J. Alloys Compd. 781: 582-588.

[7] Li S., Chen J., Jiang W., Liu Y., Ge Y., Liu J., (2019), Facile construction of flower-like bismuth oxybromide/bismuth oxide formate p-n heterojunctions with significantly enhanced photocatalytic performance under visible light. J. Colloid Interface Sci. 548: 12-19.

[8] Bhatkhande D. S., Pangarkar V. G., Beenackers A. A. C. M., (2002), Photocatalytic degradation for environmental applications – A review. J. Chem. Technol. Biotechnol. 77: 102-116.

[9] Zakeri S. M. E., Asghari M., Feilizadeh M., Vosoughi M., (2014), A visible light driven doped TiO₂ nanophotocatalyst: Preparation and characterization. Int. J. Nano Dimens. 5: 329-335.

[10] Nagalakshmi M., Karthikeyan C., Anusuya N., Brundha C., Basu M. J., Karuppuchamy S., (2017), Synthesis of TiO₂ nanofiber for photocatalytic and antibacterial applications. J. Mater. Sci.: Mate. Elect. 28: 15915-15920.

[11] Abbasian A. R., Omidvar-Askary N., (2019), Microstructural and mechanical investigation of high alumina refractory castables containing nano-titania. Ceram. Int. 45: 287-298.

[12] Karthikeyan C., Thamima M., Karuppuchamy S., (2019), Dye removal efficiency of perovskite structured CaTiO₃ nanospheres prepared by microwave assisted method. Mater. Today: Proceedings. In Press.

[13] Tong H., Ouyang S., Bi Y., Umezawa N., Oshikiri M., Ye J., (2012), Nano-photocatalytic Materials: Possibilities and Challenges. Adv. Mater. 24: 229-251.

[14] Khaksar E., Shafiee Afarani M., Samimi A., (2014), In situ solvothermal crystallization of TiO₂ nanostructure on Alumina Granules for photocatalytic wastewater treatment. J. Mater. Eng. Perform. 23: 92-100.

[15] Gómez-Pastora J., Dominguez S., Bringas E., Rivero M. J., Ortiz I., Dionysiou D. D., (2017), Review and perspectives on the use of magnetic nanophotocatalysts (MNPCs) in water treatment. Chem. Eng. J. 310: 407-427.

[16] Kefeni K. K., Mamba B. B., Msagati T. A. M., (2017), Application of spinel ferrite nanoparticles in water and wastewater treatment: A review. Sep. Purif. Technol. 188: 399-422.

[17] Zamani A., Seyed Sadjadi M., Mahjoub A. R., Yousefi M., Farhadyar N., (2020), Synthesis and characterization ZnFe₂O₄@MnO and MnFe₂O₄@ZnO magnetic nanocomposites: Investigation of photocatalytic activity for the degradation of Congo Red under visible light irradiation. Int. J. Nano Dimens. 11: 58-73.

[18] Mohamed R. M., McKinney D. L., Sigmund W. M., (2012), Enhanced nanocatalysts. Mater. Sci. Eng. R. 73: 1-13.

[19] Wang T., Zhang L., Wang H., Yang W., Fu Y., Zhou W., Yu W., Xiang K., Su Z., Dai  S., Chai L., (2013), Controllable synthesis of hierarchical porous Fe₃O₄ particles mediated by Poly(diallyldimethylammonium chloride) and their application in arsenic removal. ACS Appl. Mater. Interfaces. 5: 12449-12459.

[20] Sapna Budhiraja N., Kumar V., Singh S. K., (2019), Shape-controlled synthesis of superparamagnetic ZnFe₂O₄ hierarchical structures and their comparative structural, optical and magnetic properties. Ceram. Int. 45: 1067-1076.

[21] Guo P., Lv M., Han G., Wen C., Wang Q., Li H., Zhao X., (2016), Solvothermal synthesis of hierarchical colloidal nanocrystal assemblies of ZnFe₂O₄ and their application in water treatment. Materials (Basel). 9: 806.

[22] Jing P., Du J., Wang J., Lan W., Pan L., Li J., Wei J., Cao D., Zhang X., Zhao C., (2015), Hierarchical SrTiO₃/NiFe₂O₄ composite nanostructures with excellent light response and magnetic performance synthesized toward enhanced photocatalytic activity. Nanoscale. 7: 14738-14746.

[23] Zhu M., Meng D., Wang C., Diao G., (2013), Facile fabrication of hierarchically porous CuFe₂O₄ nanospheres with enhanced capacitance property. ACS Appl. Mater. Interfaces. 5: 6030-6037.

[24] Guo X., Wang K., Li D., Qin J., (2017), Heterogeneous photo-fenton processes using graphite carbon coating hollow CuFe₂O₄ spheres for the degradation of methylene blue. Appl. Surf. Sci. 420: 792-801.

[25] Sun Z., Liu L., Zeng Jia D., Pan W., (2007), Simple synthesis of CuFe₂O₄ nanoparticles as gas-sensing materials. Sens. Actuators B. 125: 144-148.

[26] Kombaiah K., Vijaya J. J., Kennedy L. J., Bououdina M., Al-Najar B., (2018), Conventional and microwave combustion synthesis of optomagnetic CuFe₂O₄ nanoparticles for hyperthermia studies. J. Phys. Chem. Solids. 115: 162-171.

[27] Hou H., Xu G., Tan S., Zhu Y., (2017), A facile sol-gel strategy for the scalable synthesis of CuFe₂O₄ nanoparticles with enhanced infrared radiation property: influence of the synthesis conditions. Infrared Phys. Technol. 85: 261-265.

[28] Agouriane E., Rabi B., Essoumhi A., Razouk A., Sahlaoui M., Costa B., Sajieddine M., (2016), Structural and magnetic properties of CuFe₂O₄ ferrite nanoparticles synthesized by co-precipitation. J. Mater. Environ. Sci. 7: 4116-4120.

[29] Zhang E., Wang L., Zhang B., Xie Y., Wang G., (2019), Shape-controlled hydrothermal synthesis of CuFe₂O₄ nanocrystals for enhancing photocatalytic and photoelectrochemical performance. Mater. Chem. Phys. 235: 121633-121638.

[30] Yang X., Zhang S., Yu Q., Sun P., Liu F., Lu H., Yan X., Zhou X., Liang X., Gao Y., (2018), Solvothermal synthesis of porous CuFe₂O₄ nanospheres for high performance acetone sensor. Sens. Actuators. B. 270: 538-544.

[31] Shaterian M., Rezvani A., Abbasian A. R., (2020), Controlled synthesis and self-assembly of ZnFe₂O₄ nanoparticles into microspheres by solvothermal method. Mater. Res. Express. 6: 1250-1255.

[32] Atacan K., Topaloğlu B., Özacar M., (2018), New CuFe₂O₄/amorphous manganese oxide nanocomposites used as photocatalysts in photoelectrochemical water splitting. Appl. Catal. A. 564: 33-42.

[33] Hou H., Xu G., Tan S., Xiang S., (2018), Effects of solvents on the synthesis and infrared radiation emissivity of CuFe₂O₄ spinels. J. Alloys Compd. 763: 736-741.

[34] Kurian J., Mathew M. J., (2018), Structural, optical and magnetic studies of CuFe₂O₄, MgFe₂O₄ and ZnFe₂O₄ nanoparticles prepared by hydrothermal/solvothermal method. J. Magn. Magn. Mater. 451: 121-130.

[35] Liu X., Qi X., Zhang L., (2018), 3D hierarchical magnetic hollow sphere-like CuFe₂O₄ combined with HPLC for the simultaneous determination of Sudan I–IV dyes in preserved bean curd. Food Chem. 241: 268-274.

[36] Muthukumar K., Lakshmi D. S., Acharya S. D., Natarajan S., Mukherjee A., Bajaj H., (2018), Solvothermal synthesis of magnetic copper ferrite nano sheet and its antimicrobial studies. Mater. Chem. Phys. 209: 172-179.

[37] Phuruangrat A., Kuntalue B., Dumrongrojthanath P., Thongtem T., Thongtem S., (2018), Microwave-assisted solvothermal synthesis of cubic ferrite (MFe₂O₄, M= Mn, Zn, Cu and Ni) nanocrystals and their magnetic properties. Dig. J. Nanomater. Biostruct. 13: 563-568.

[38] Zheng J., Lin Z., Liu W., Wang L., Zhao S., Yang H., Zhang L., (2014), One-pot synthesis of CuFe₂O₄ magnetic nanocrystal clusters for highly specific separation of histidine-rich proteins. J. Mater. Chem. B. 2: 6207-6214.

[39] Chatterjee B. K., Bhattacharjee K., Dey A., Ghosh C. K., Chattopadhyay K. K., (2014), Influence of spherical assembly of copper ferrite nanoparticles on magnetic properties: Orientation of magnetic easy axis. Dalton Trans. 43: 7930-7944.

[40] Shen Y., Wu Y., Xu H., Fu J., Li X., Zhao Q., Hou Y., (2013), Facile preparation of sphere-like copper ferrite nanostructures and their enhanced visible-light-induced photocatalytic conversion of benzene. Mater. Res. Bull. 48: 4216-4222.

[41] Kafi-Ahmadi L., Mohammadzadeh-Hesar R., Khademinia S., (2018), Influence of reaction parameters on crystal phase growth and optical properties of ultrasonic assisted hydro- and solvothermal synthesized sub-micrometer-sized CdS spheres. Int. J. Nano Dimens. 9: 346-356.

[42] Hosseini S. A., Majidi V., Abbasian A. R., (2018), Photocatalytic desulfurization of dibenzothiophene by NiCo₂O₄ nanospinel obtained by an oxidative precipitation process modeling and optimization. J. Sulfur Chem. 39: 119-129.

[43] Mills G., Li Z., Meisel D., (1988), Zero-dimensional excitons in semiconductor clusters. J. Phys. Chem. 92: 822-830.

[44] Tauc J., Menth A., (1972), States in the gap. J. Non· Cryst. Solids. 8: 569-585.

[45] Tran P. H., Thi Hang A.-H., (2018), Deep eutectic solvent-catalyzed arylation of benzoxazoles with aromatic aldehydes. RSC Adv. 8: 11127-11133.

[46] Zaharescu M., Mocioiu O. C., (2013), Infrared Spectroscopy, in: T. Schneller, R. Waser, M. Kosec, D. Payne (Eds.) Chem. Solut. Depos.Func. Oxide Thin Films, Springer Vienna, Vienna, 213-230.

[47] Nakamoto K. (2009). Infrared and Raman Spectra of Inorganic and Coordination Compounds: Part B: Applications in Coordination, Organometallic, and Bioinorganic Chemistry, Sixth Edition ed., John Wiley & Sons, Hoboken, New Jersey.

[48] Guo P., Zhang G., Yu J., Li H., Zhao X. S., (2012), Controlled synthesis, magnetic and photocatalytic properties of hollow spheres and colloidal nanocrystal clusters of manganese ferrite. Colloids Surf. A. 395: 168-174.

[49] Hosseini S. A., Abbasian A. R., Gholipoor O., Ranjan S., Dasgupta N., (2019), Adsorptive removal of arsenic from real sample of polluted water using magnetic GO/ZnFe₂O₄ nanocomposite and ZnFe₂O₄ nanospinel. Int. J. Environ. Sci. Technol. 16: 7455-7466.

[50] Abbasian A. R., Shafiee Afarani M., (2019), One-step solution combustion synthesis and characterization of ZnFe₂O₄ and ZnFe_1.6O₄ nanoparticles. Appl. Phys. A. 125: 721-726.

[51] Guo P., Wang R., Xue J., Xu B., Sang Y., Li H., Zhao X. S., (2017), Assembly of colloidal cuprous oxide nanocrystals and study of its magnetic and electrocatalytic properties. Colloids Surf. A. 522: 295-303.