A Kinetic Study of Vanadium Dissolution During Acetic Acid Leaching of Steel Making Converter Slag

Journal of Advanced Materials and Processing

دوره 8، شماره 4، بهمن 2020، صفحه 35-44   

نوع مقاله: Research Paper

نویسندگان

Seyed Amirhossein Emami^* ؛ Mohammad Reza Kelishadi

Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

چکیده

Steelmaking slags are known as the secondary product of steel making process. Regarding the high rate of slag production and the existence of a noticeable amount of toxic and valuable metals such as vanadium in this material; recovery of vanadium from this product is necessary. In this study, steel making converter slag (containing about 1.96 wt.% V₂O₅) was ground to a mean size of 85 µm, and recovery of vanadium was carried out using acetic acid leaching. The effects of time (in the range of 0 to 120 min) and temperature (in the range of 0 to 80 ⁰C) in fixed acetic acid concentration (1 molal) and solid to liquid weight ratio (one gram slag in 200 ml) on the leaching process were investigated. The results showed that the increase in time and decrease of temperature (activation energy was equal to -11.4 kJ/mol) increases vanadium leaching efficiency. Maximum leaching efficiency was reached at 0 ⁰C and 90 min. Kinetics studies showed that heat diffusion through the solid layer is the controlling step of vanadium dissolution in acetic acid. Furthermore, thermal conductivity (ka) decreases by increasing temperature (ka=21877.6/T3), so the heat moves away from the reaction zone to the particle's surface at a slower rate.

کلیدواژه‌ها

Vanadium Recovery؛ Steel making converter slag؛ Leaching؛ Acetic acid؛ Kinetics

مراجع

[1] Mahdavian, A, Shafyei, A., Keshavarz, E, Haghshenas, D.F., Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters, International Journal of ISSI, 2006, Vol.3, pp.17-21.

[2] Ye, G, "Recovery of Vanadium from LD slag, A state of the art report, Part 1-Facts and metallurgy of Vanadium" JERNKONTORETS FORSKING, 2006.

[3] Parvizi, R., Vahdati Khaki, J., Moayed, M.H., Rezaei Ardani, M., "Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method" Metallurgical and Materials Transactions B, 2012, Vol.43, pp.1269–1276.

[4] Lindval, M., "Selective oxidation of Vanadium prior to Iron and phosphorus", Master's thesis, Lulea University of Technology, 2006.

[5] Shen, H, Forssberg, E, "An overview of recovery of metals from slags", Waste Management, 2003, Vol.23, pp.933-949.

[6] Wen, J., Jiang, T., Xu, Y., Liu, J., Xue, X., "Efficient Separation and Extraction of Vanadium and Chromium in High Chromium Vanadium Slag by Selective Two-Stage Roasting–Leaching", Metallurgical and Materials Transactions B, 2018, Vol.49, pp.1471–1481.

[7] Emami, A.H., "Vanadium Recovery from Steel Making Converter Slag", M.Sc. thesis, Iran University of Science and Technology, 2003.

[8] Aarabi, M, Rashchi, F., Mostoufi, N., Vahidi, E., "Leaching of vanadium from LD converter slag using sulfuric acid", Hydrometallurgy, 2010, Vol.102, pp.14-21.

[9] Abbasi, M.H., Safarnoorallah, M., "Extraction of Vanadium Oxide from Boiler Fuel Ash", Journal of Advanced Materials in Engineering (Esteghlal), 1998, Vol. 17 (1), pp. 165-175.

[10] Huang, W., Liu, Y., "Separation of Vanadium and Titanium Phase from the Vanadium Slag System Utilizing Supergravity", ISIJ International, 2021, Vol. 61 No. 3, pp. 690–696

[11] Xiao, Q., Chen, Y., Gao, Y., Xu, H., Zhang, Y., "Leaching of silica from vanadium-bearing steel slag in sodium hydroxide solution", Hydrometallurgy, 2010, Vol.104, pp.216-221.

[12] Bold, T., Kuziak, R., "Phase transformation during oxidizing roasting of titanomagnetite pellets in vanadium recovery process", Iron making and Steelmaking, 1990, Vol.17, No.3, pp.167-78.

[13] Hobson, A.J., Stewart D.I., Bray A.W., Mortimer R.J.G., Mayes W.M., Rogerson M., Burke I.T., "Mechanism of vanadium leaching during surface weathering of basic oxygen furnace steel slag blocks: a micro focus X-ray absorption spectroscopy and electron microscopy study", Environ. Sci. Technol., 2017, Vol.51, No.14, pp.7823-30.

[14] Iwama T., Du C., Gao X., Kim S., Ueda S., Kitamura S., "Extraction of Phosphorus from Steelmaking slag by selective leaching using citric acid", ISIJ International, 2018, Vol.58, No.7, pp.1351-60

[15] Eloneva, S., Teir, S., Revitzer, H., Salminen, J., Said, A., Fogelnolm, C., Zevenhoven, R., "Reduction of CO2 emissions from steel plants by using steelmaking slags for production of marketable calcium carbonate", Steel Research International, 2009, Vol.80, Issue 6, pp.415-421.

[16] Gharabaghi, M., Noaparast, N., Irannejad, M., "Selective Leaching Kinetics of low-grade calcareous phosphate ore in acetic acid", Hydrometallurgy, 2009, Vol.95, pp.341-345.

[17] Teir, S., Eloneva, S., Fogelholm, C., Zevenhoven, R., "Dissolution of steelmaking slags in acetic acid for precipitated calcium carbonate production", Energy, 2007, Vol.32, pp.528-539.

[18] Jillavenkatesa, A., Dapkunas, S.J., Lum, L.H.," Particle Size Characterization", National Institute of Standards and Technology Special Publication, 2001.

[19] Wilkomirsky, A.I.E., Luraschi, A., Reghezza, A., "Vanadium Extraction Process from Basic Steel Refining Slags", in: Extractive Metallurgy 85, The Institution of Mining and Metallurgy, 1985, pp. 531-49.

[20] Balaz, P., "Extractive Metallurgy of Activated Minerals", Elsevier, 2000.

[21] Habashi, F., "Kinetics of Metallurgical Processes", Metallurgie Extractive Quebec, 1999.

[22] Levenspiel, O., "Chemical Reaction Engineering", 3 ed., Wiley, 1999.

[23] Gaskell, D.R., "Introduction to transport phenomena in materials engineering", Momentum Press, 2 ed., 2012

[24] Geiger, G.H., Poirier, D.R., "Transport phenomena in metallurgy", Addison-Wesley, Reading, 1973.

[25] Epifanov, G.I., "Solid State Physics", Mir Publisher, 1979.

[26] Hummel, R.E., "Electronic Properties of Materials, an Introduction for Engineers", Springer-Verlag, 1985.

[27] Rosenqvist, T., "Principles of Extractive Metallurgy", McGraw-Hill, 1983.

[28] Hook, J.R., Hall, H.E., "Solid State Physics", 2 ed., Wiley, 1995.