Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method

ADMT Journal

دوره 14، شماره 2، شهریور 2021، صفحه 85-92   

نوع مقاله: Original Article

شناسه دیجیتال (DOI): 10.30495/admt.2021.1916102.1230

نویسندگان

Behzad Bayati Chaleshtori¹؛ Ali Hajiahmad^{* 2}؛ Seyed Saeid Mohtasebi³

¹Department of Mechanical Engineering of Biosystems, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran

²Department of Mechanical Engineering of Biosystems, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran.

³Department of Mechanics of Agricultural Machinery, Faculty of Engineering & Technology , College of Agriculture & Natural Resources, University of Tehran, Karaj, Iran.

چکیده

In this study, the characteristics of rectangular Kirchhoff nano-plate vibrations are investigated using a modified couple stress theory. To consider the effects of small-scale, the modified couple stress theory proposed by Young (2002) is used as it has only one length scale parameter. In modified couple stress theory, the strain energy density is a function of the components of the strain tensor, curvature tensor, stress tensor, and symmetric part of the couple stress tensor. After obtaining the strain energy, external work, and kinetic energy equation and inserting them in the Hamilton principle, the main and auxiliary equations of nano-plate are obtained. Then, by applying the boundary and force conditions in the governing equations, the vibrations of the rectangular Kirschhof nano-plate with the thickness are investigated with simple support around. The solution method used in this study is the Navier method and the effects of material length scale, length and thickness of the nanoplate on the vibration are investigated and the results are presented and discussed in details.

کلیدواژه‌ها

Kirchhoff Plate؛ Navier Solution Method؛ Modified Couple Stress Theory؛ Rectangular Nano-Plate؛ Vibrations

مراجع

[1]     Yang, F., Chong, A. C. M., Lam, D. C. C., and Tong, P., Couple Stress Based Strain Gradient Theory for Elasticity, Int. J. Solids Struct, Vol. 39, 2002, pp. 2731–2743, DOI: 10.1016/S0020-7683(02)00152-X.

[2]     Toupin, R. A., Elastic Materials with Couple Stresses, Arch. Rational Mech. Anal, Vol. 11, 1962, pp. 385–414.

[3]     Mindlin, R. D., Tiersten, H. F., Effects of Couple-Stresses in Linear Elasticity, Arch. Rational Mech. Anal, Vol. 11, 1962, pp. 415–448.

[4]     Koiter, W. T., Couple Stresses in the Theory of Elasticity, I and II. Proc. K. Ned. Akad. Wet. (B), Vol. 67, 1964, pp. 17–44.

[5]     Mindlin, R. D., Micro-Structure in Linear Elasticity, Arch. Rational Mech. Anal, Vol. 16, 1964, pp. 51–78.

[6]     Tsiatas, G. C, A New Kirchhoff Model Based On a Modified Couple Stress Theory, International Journal of Solids and Structures, Vol. 46, 2009, pp. 2757-2764, DOI: 10.1016/j.ijsolstr.2009.03.004.

[7]     Tai, T., Ho Choi, D., Size-Dependent Functionally Graded Kirchhoff and Mindlin Plate Theory Based On a Modified Couple Stress Theory, Composite Structures, Vol. 95, 2013, pp. 142-153, DOI: 10.1016/j.compstruct.2012.08.023.

[8]     Akgoz, B., Civalek, O., Free Vibration Analysis for Single –Layered Graphene Sheets in an Elastic Matrix Via Modified Couple Stress Theory, Materials and Design, Vol. 42, 2012, pp. 164-171, DOI: 10.1016/j.matdes.2012.06.002.

[9]     Wang, B., Zhou, S., Zhao, J., and Chen, X., Asize-Dependent Kirchhoff Micro-Plate Model Based On Strain Gradient Elasticity Theory, European Journal of Mechanics A/Solids, Vol. 30, 2011, pp. 517-524, DOI: 10.1016/j.euromechsol.2011.04.001.

[10]  Roque, C. M. C., Ferreira, A. J. M., and Reddy, J. N., Analysis of Mindlin Micro Plates with A Modified Couple Stress Theory and Meshlessmethod, Applied Mathematical Modeling, Vol. 37, 2013, pp. 4626-4633, DOI: 10.1016/j.apm.2012.09.063.