Free Torsional Vibration Analysis of Hollow and Solid Non-Uniform Rotating Shafts Using Distributed and Lumped Modeling Technique

Journal of Solid Mechanics

مقاله 7، دوره 14، شماره 1، خرداد 2022، صفحه 89-98   

نوع مقاله: Research Paper

شناسه دیجیتال (DOI): 10.22034/jsm.2021.1899087.1591

نویسندگان

A Saghafi^* ؛ M .A Azizi

Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran

چکیده

In this paper, the torsional free vibration of solid and hollow rotating shafts with non-uniform tapered elements are investigated. To this end, the exact solution and also transfer matrix for the free torsional vibration of a hollow tapered shaft element with uniform thickness and also solid element are firstly obtained. Then, the natural frequencies are determined based on distributed and lumped modeling technique (DLMT). This technique is similar to transfer matrix method (TMM) but the exact solution is employed to obtain the transfer matrixes of the distributed element, therefore, there is no approximation and the natural frequencies and mode shapes are the exact values. To confirm the reliability of the presented method, the simulation results are compared with the results obtained from the other methods such as finite element method. It is shown that the proposed method provides highly accurate results and it can be simply applied to the complex torsional systems. 

کلیدواژه‌ها

Torsional vibration؛ Hollow tapered shaft؛ Distributed and lumped modeling techniques (DLMT)؛ Transfer matrix method (TMM)؛ Natural frequency

مراجع

1.  Qing H.Q., Cheng X.M., 1996, Coupled torsional-flexural vibration of shaft systems in mechanical engineering- I, Finite element model, Computers & Structures 58: 835-843.
2.  Koser K., Pasin F., 1997, Torsional vibrations of the drive shafts of mechanisms, Journal of Sound and Vibration 199: 559-565.
3.  Tabassian R., 2013, Torsional vibration analysis of shafts based on Adomian decomposition method, Applied and Computational Mechanics 7: 205-222.
4.  Boukhalfa A., Hadjoui A., Hamza C.S.M., 2010, Free vibration analysis of an embarked rotating composite shaft using the hp- version of the FEM, Latin AmericanJournal of Solids and Structures 7(2): 105-141.
5.  Chen M., Li Sh., Li H., Peng T., Liu S., 2018, New analytic method for free torsional vibration analysis of a shaft with multiple disks and elastic supports, Archive of Applied Mechanics 88(6): 955-979.
6.  Chen Y.Z., 2001, Torsional free vibration of a cylinder with varying cross-section and adhesive masses, Journal of Sound and Vibration 241(3): 503-512.
7.  Wu J.J., 2013, Torsional vibrations of a conic shaft with opposite tapers carrying arbitrary concentrated elements, Marine Engineering and Applications 2013: 491062.     
8.  Nagaraj V.T., Sahu N., 1982, Torsional vibrations of non-uniform rotating blades with attachment flexibility, Journal of Sound and Vibration 80: 401-411.
9.  Wu J.J., 2007, Torsional vibration analyses of a damped shafting system using tapered shaft element, Journal of Sound and Vibration 306(3-5): 946-954.
10.  Myklestad N.O., 1944, A new method of calculating natural modes of uncoupled bending vibration of airplane wings and other type of beams, Journal of Aerospace Science 11: 153-162.
11.  Prohl M.A., 1945, A general method for calculating critical speeds of fiexible rotors, Journal of Applied Mechanics 12: 142-148.
12.  Wu J.S., Yang I.H., 1995, Computer method for torsion-and-flexure-coupled forced vibration of shafting system with damping, Journal of Sound and Vibration 180(3): 417-435.
13.  Hsieh S.C., Chen J.H., Lee A.C., 2008, A modified transfer matrix method for the coupled lateral and torsional vibrations of asymmetric rotor-bearing systems, Journal of Sound and Vibration 312: 563-571.
14.  Bashir Asdaque P.M.G., Behera R.K., 2014, Vibration analysis of hollow tapered shaft rotor, Advances in Acoustics and Vibration 2014: 410851.
15.  Whalley R., 1988, The response of distributed-lumped parameter systems, Proceedings of the Institution of Mechanical Engineers 202(C6): 421-428.
16.  Aleyaasin M., Ebrahimi M., Whalley R., 2001, Flexural vibration of rotating shafts by frequency domain hybrid modelling, Journal of Computers and Structures 79: 319-331.
17.  Meirovitch L., 1967, Analytical Methods in Vibrations, Macmillan, Company, London.
18.  Thomson W.T., 1988, Theory of Vibration with Application, Prentice-Hall.
19.  Yang M., Hu Y., Zhang J., Ding G., Song Ch., 2018, Study on forced torsional vibration of CFRP drive-line system with internal damping, Applied Composite Materials 25(6): 1307-1322.