Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure

ADMT Journal

دوره 14، شماره 3 - شماره پیاپی 56، آذر 2021، صفحه 85-89   

نوع مقاله: Original Article

شناسه دیجیتال (DOI): 10.30495/admt.2021.1921748.1245

نویسندگان

Mohammad Reza Zamani^* ؛ Mohsen Zaretabar؛ Hossein Parsa؛ Mohsen Heydari Beni

Department of Mechanical Engineering, Malek Ashtar University of Technology, Tehran, Iran

چکیده

This study aims to the investigation of the effect of grid geometry on the modal response and buckling strength of a composite conical lattice structure under static axial loading by Finite Element Method (FEM). For this purpose, four structures with similar geometry have been designed through four grid structures. Abaqus finite element software has been used for modeling and analyzing the structures. The experimental results of Zamani and Ahmadifar study [1] have been used to validate the results of FEM. Given the results of numerical and experimental analysis, there is an accordance between the results and the FEM efficiency. The results show the contiguous natural frequency of the structures so that their negligible difference is due to the variations of structures’ weight and stiffness. Changing the grid does not affect the shape of the modes. The isogrid bears a higher buckling loading than the anisogrid. Reducing the rib angle is an effective parameter, which increases the buckling loading on the structure. Although peripheral ribs play a role in load bearing, adding their numbers increases the total weight of the structure, therefore, it has no significant effect on increasing the stability of the structure.

کلیدواژه‌ها

Grid-stiffened composite conical structure؛ FEM؛ Modal Analysis؛ Buckling

مراجع

• Ahmadifar, A., Zamani, M. R., Davar, A., Eskandari Jam, J., Heydari, and Beni, M., Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure Before and After Lateral Impact, Journal of Applied and Computational Mechanics, Vol. 6, No. 4, 2020, pp. 813-22.
• Vasiliev, V., Razin, A., Anisogrid Composite Lattice Structures for Spacecraft and Aircraft Applications, Composite Structures, Vol. 76, 2006, pp. 182-189.
• Totaro, G., Flexural, Torsional, and Axial Global Stiffness Properties of Anisogrid Lattice Conical Shells in Composite Material, Composite Structures, Vol. 153, 2016, pp. 738-745.
• Mangas, C., Vilanova, J., Díaz, V., Samartín, C., Kiryenko, S., Katajisto, H., and Pérez-Álvarez, J., Anisogrid Payload Adaptor Structure for Vega Launcher, 2016.
• Khadem, S. E., Nezamoleslami, R., Investigation of the Free Vibrations of Composite Anisogrid Lattice Conical Shells Formed by Geodesically Spiral and Circumferential Ribs, International Journal of Applied Mechanics, Vol. 9, 2017, pp. 1750047.
• Davar, A., Azarafza, R., and Bagheri, V., Experimental and Numerical Analysis of Incomplete Composite Laticce Structures Reinforced With and Without Carbon Nanotubes Under Axial Compressive Force, Composite Science and Technology, Vol. 4, 2018, pp. 418-425.