اخبار و اعلانات

 آمار

تعداد نشریات418
تعداد شماره‌ها10,005
تعداد مقالات83,625
تعداد مشاهده مقاله78,443,766
تعداد دریافت فایل اصل مقاله55,462,273
Achazhiyath Edathil, Anjali, Pal, Priyabrata, Banat, Fawzi. (1398). Amine contaminants removal using alginate clay hybrid composites and its effect on foaming. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 10(2), 145-158. doi: https://doi.org/10.1007/s40090-019-0180-9
Anjali Achazhiyath Edathil; Priyabrata Pal; Fawzi Banat. "Amine contaminants removal using alginate clay hybrid composites and its effect on foaming". نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 10, 2, 1398, 145-158. doi: https://doi.org/10.1007/s40090-019-0180-9
Achazhiyath Edathil, Anjali, Pal, Priyabrata, Banat, Fawzi. (1398). 'Amine contaminants removal using alginate clay hybrid composites and its effect on foaming', نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 10(2), pp. 145-158. doi: https://doi.org/10.1007/s40090-019-0180-9
Achazhiyath Edathil, Anjali, Pal, Priyabrata, Banat, Fawzi. Amine contaminants removal using alginate clay hybrid composites and its effect on foaming. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 1398; 10(2): 145-158. doi: https://doi.org/10.1007/s40090-019-0180-9

Amine contaminants removal using alginate clay hybrid composites and its effect on foaming

International Journal of Industrial Chemistry
دوره 10، شماره 2، شهریور 2019، صفحه 145-158
نوع مقاله: research article
شناسه دیجیتال (DOI): https://doi.org/10.1007/s40090-019-0180-9
نویسندگان
Anjali Achazhiyath Edathil؛ Priyabrata Pal* ؛ Fawzi Banat*
Department of Chemical Engineering, Khalifa University, P.O. Box 127788, Abu Dhabi, United Arab Emirates
چکیده
Heat stable salts such as total organic acids (TOA) and heavy metals are well known contaminants in the acid gas removal systems operating using alkanolamines such as methyldiethanolamine (MDEA, 50 wt%). Decontamination of TOA and heavy metals from lean MDEA always remain as a challenge to the gas industry, as accumulation of TOA deteriorates the solvent quality, weakens the absorption capacity and enhances foaming problems leading to huge loss of MDEA and presence of heavy metals results in corrosion and fouling of equipment. Equilibrium batch adsorption were carried out using calcium alginate clay hybrid composites (CAH) containing sepiolite and bentonite for assessing the sorption performance of TOA and heavy metals such as chromium and iron from industrial lean MDEA solutions. The physiochemical properties of the adsorbent were elucidated using SEM, EDX and FTIR analysis. The effects of operational parameters such as amount of sorbent, contact time and temperature on the sorption capacity were also investigated. Kinetics results indicated that the chemisorption nature. The pseudo-second order model gave the best fit. The adsorption efficiency increased with increasing the temperature. Adsorption followed type VI isotherm according to the IUPAC classification, with sorption taking place in different stages. Regeneration studies revealed that 4% CaCl2 acts as an effective eluting agent and no reduction in capacity was observed even after 3 cycles of regeneration. Foaming studies carried out with treated lean MDEA confirmed the reduction in foam of MDEA solutions owing to the effective removal of foam creators such as TOA from lean MDEA by CAH composites. A 15.8% reduction in TOA content was found to decrease the foam height by 37.5%. Thus, CAH composites containing bentonite and sepiolite are having the potential to reclaim industrial lean MDEA solutions.
کلیدواژه‌ها
Alginate · Clay composites · Adsorption · Lean amine · Foaming
آمار
تعداد مشاهده مقاله: 36


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب