اخبار و اعلانات

 آمار

تعداد نشریات418
تعداد شماره‌ها10,005
تعداد مقالات83,624
تعداد مشاهده مقاله78,435,442
تعداد دریافت فایل اصل مقاله55,456,016
Sharma, Sumit, Kothiyal, Navin Chandra, Rathore, Bhim Singh. (1393). Use of cellulose acetate–tin (lV) phosphate composite (CA/TPC) in highly effective removal and recovery of heavy metal ions. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 6(1), 43-58. doi: https://doi.org/10.1007/s40090-015-0031-2
Sumit Sharma; Navin Chandra Kothiyal; Bhim Singh Rathore. "Use of cellulose acetate–tin (lV) phosphate composite (CA/TPC) in highly effective removal and recovery of heavy metal ions". نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 6, 1, 1393, 43-58. doi: https://doi.org/10.1007/s40090-015-0031-2
Sharma, Sumit, Kothiyal, Navin Chandra, Rathore, Bhim Singh. (1393). 'Use of cellulose acetate–tin (lV) phosphate composite (CA/TPC) in highly effective removal and recovery of heavy metal ions', نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 6(1), pp. 43-58. doi: https://doi.org/10.1007/s40090-015-0031-2
Sharma, Sumit, Kothiyal, Navin Chandra, Rathore, Bhim Singh. Use of cellulose acetate–tin (lV) phosphate composite (CA/TPC) in highly effective removal and recovery of heavy metal ions. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 1393; 6(1): 43-58. doi: https://doi.org/10.1007/s40090-015-0031-2

Use of cellulose acetate–tin (lV) phosphate composite (CA/TPC) in highly effective removal and recovery of heavy metal ions

International Journal of Industrial Chemistry
دوره 6، شماره 1، خرداد 2015، صفحه 43-58
نوع مقاله: research article
شناسه دیجیتال (DOI): https://doi.org/10.1007/s40090-015-0031-2
نویسندگان
Sumit Sharma1؛ Navin Chandra Kothiyal* 1؛ Bhim Singh Rathore2
1Department of Chemistry, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, 144011, Punjab, India
2Department of Chemistry, Shoolini University, Solan, 173212, Himachal Pradesh, India
چکیده
A novel cellulose acetate–tin (IV) phosphate composite material has been synthesized under varying conditions. The material was characterized by FTIR, SEM, EDX and XRD. The composite material was explored for its use in separation of toxic metal cations present in electroplating waste discharge and similar synthetic fluid by varying the system conditions [temperature (298–313 K), pH (2–12), time (10–420 min), dosage (1–10 g) and initial concentration of metal cations (1.0–15.0 mg/dm3)]. Highest removal rate was achieved for Cr3+, Ni2+ and Zn2+ (99, 98 and 94 %) under optimal conditions. Experimental equilibrium data for Cr3+, Ni2+ and Zn2+ ions fitted well with Langmuir isotherms (R 2 > 0.99). The adsorption capacities for Cr3+, Ni2+ and Zn2+ ions were found to be 31.5, 43.7 and 43.4 mg/g. Pseudo-second-order model explained the kinetics of adsorption (R 2 > 0.99) for all the metal ions undertaken in the study. Thermodynamic parameters such as ΔG, ΔS and ΔH show spontaneity and endothermic nature of the process at all the concentration ranges studied (2–15 mg/dm3). Desorption of metal ion from (CA/TPC) surface was carried out using 0.1 N nitric acid as an eluent under varying system pHs (1–6). Maximum desorption’s for all the metal ions were observed at pH 1. The adsorption efficiencies of CA/TPC for the metal ions were maintained after four consecutive cycles of adsorption/desorption process. The loss in the dry weight of CA/TPC was not more than 10 % after each cycle of process. Due to easy and high regeneration properties of CA/TPC, it was found to be economical and have shown potential benefits in recovery of metal ions from wastewater.
کلیدواژه‌ها
CA/TPC؛ Electroplating wastewater؛ Isotherm؛ Kinetic model؛ Desorption
آمار
تعداد مشاهده مقاله: 13


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب