Evaluate the relationship between fixation in the design process and the level of expertise of designers

Space Ontology International Journal

دوره 11، شماره 2 - شماره پیاپی 41، شهریور 2022، صفحه 37-48   

نوع مقاله: Original Article

شناسه دیجیتال (DOI): 10.22094/soij.2022.1955979.1496

نویسندگان

Siamak Mahjoorian Namari^{* 1}؛ shahin heidari²؛ hamidreza ebrahimi²

¹Department of Architecture, Kish International Campus, University of Tehran, Kish, Iran

²Department of Architecture, Faculty of Architecture, Fine Arts Campus, University of Tehran, Tehran, Iran

چکیده

In the context of creativity in design, much research has been done with an endeavor to discover the factors advocating creativity in design. Though, not much effort has been put in identifying of the factors disrupting creativity. One phenomenon that acts as an obstacle to creativity in design, or detracts from it, is the phenomenon of fixation. The term “design fixation” is often used interchangeably to refer to situations where designers limit their creative output because of an overreliance on features of preexisting designs, or more generally, an overreliance on a specific body of knowledge directly associated with a problem. It is understood as the inability to solve design problems by employing a typical or familiar method, ignoring new or better ones. In this research, an attempt has been made to investigate the factors that create fixation in design by examining how the previous knowledge of designers affects design. This way, a structure was presented to better understand the factors of fixation in the stages of the design process. Then it was explored what the differences and similarities in designers with different levels of expertise are. Finally, the formation of fixation in the design process stages, under the influence of the designers expertise level as an intervening variable, was explained. And so, the designers will be able to recognize the causes of their fixation and prevent fixation in design or at least reduce its amount. Also, design teachers, with awareness of these causes, will be able to guide students to stay away from this phenomenon.

کلیدواژه‌ها

fixation؛ design process؛ precedent knowledge؛ level of expertise

مراجع

Agogué, Marine;  Kazakçı, Akın; Hatchuel, Armand; Le Masson, Pascal; Weil, Benoit et al.. (2014). The impacts of examples on creative design : explaining fixation and stimulation effects. Journal of Creative Behavior, Creative Education Foundation, 2014, 48 (1), pp.1-12. ‌hal-00707354‌

Alipour, Leyla (2021) . The Relation between Design Expertise and the Quality of Design Idea, Int. J. Architect. Eng. Urban Plan, 31(1): 1-11 January 2021 ,DOI: 10.22068/ijaup.31.1.585

Ansari, Hamidreza  (2009) ‘Generators and Processors in Architecture Design Process’ , Honar-Ha-Ye-Ziba Memari-Va-Shahrsazi,39: 5-14 .

Asimov, M. (1962). Introduction to design . Englewood Cliffs, NJ: Prentice-Hall.

Ball, L. J., Ormerod, T. C., and Morley, N. J. (2004) ‘Spontaneous Analogising in Engineering Design: A Comparative Analysis of Experts and Novices’ ,Des. Stud., 25_5 : 495–508.

Boling, E. (2020) ‘The Nature and Use of Precedent in Designing’ ,In J. K. McDonald & R. E. West, Design for Learning: Principles, Processes, and Praxis. EdTech Books. Retrieved from https://edtechbooks.org/id/precedent

Bonnardel, N., & Marmèche, E. (2004) ‘Evocation processes by novice and expert designers: Towards stimulating analogical thinking’ ,Creativity and Innovation Management, 13(3): 176-186.

Bonnardel, Nathalie ; Wojtczuk, Alicja ; Gilles, Pierre-Yves and Mazon, Sylvain. (2017) ‘The creative process in design’ ,The Creative Process: Perspectives from multiple domains, 2017. hal-01778728

Camarda, Anaëlle; Ezzat, Hicham;  Cassotti, Mathieu; Agogué, Marine; Weil, Benoit  and Le Masson , Pascal (2017). ‘The role of Expertise in Design Fixation: Managerial Implications for Creative Leadership’ . The 24th Innovation and Product Development Management Conference, Jun 2017, Reykjavik, Iceland.

Casakin, Hernan ; Goldschmidt, Gabriela (1999) ‘Expertise and the use of visual analogy: implications for design education’ ,Design Studies,Volume 20, Issue 2,1999,Pages 153-175

Condoor, Sridhar ; LaVoie , Donna (2007)  ‘Design Fixation: A Cogntive Model’ International Conference On Engineering Design, ICED’07, 28 - 31 AUGUST 2007, Cite Des Sciences Et De L'industrie, Paris, France

Creeger, Samantha (2019) ‘Design problem exploration’ Graduate Theses and Dissertations, Iowa State University Capstones

Crilly, N., & Cardoso, C. (2016) ‘Where next for research on fixation, inspiration and creativity in design ?’ , Findings from an international workshop. Design Studies, 50: 1–38.

Dorst, C. H. (2003). The problem of design problems. In E. Edmonds, & N. G. Cross (Eds.), Expertise in Design, Design Thinking Research Symposium 6 Creativity and Cognition Studios Press.

Dubberly , hugh (2004). How do you design? A compendium of models .dubberly design office,2501 harrison street, san Francisco,CA

Finke, R. A., Ward, T. B., & Smith, S. M. (1992). Creative cognition: Theory, research and application. Cambridge: MIT Press.

HOWARD, Thomas J. ; MAIER, Anja M. ; ONARHEIM, Balder and Friis-Olivarius, Morten  (2013) ‘Overcoming Design Fixation Through Education And Creativity Methods’ , International Conference On Engineering Design, ICED13:19-22 AUGUST 2013, SUNGKYUNKWAN UNIVERSITY, SEOUL, KOREA

Hui, Qian; Li , Yan ;  Tao ,Ye and Liu, Hongwei (2020) ‘Triple‑Helix Structured Model Based on Problem‑Knowledge‑Solution Co‑evolution for Innovative Product Design Process’ , Chinese Journal of Mechanical Engineering, 33:94 . https://doi.org/10.1186/s10033-020-00519-2

Jansson, D.G. and Smith, S.M. (1991)  ‘Design fixation’ , Design Studies, 12(1), 1991 : 3-11.

Lawson, Bryan  (2005) ‘How Designers Think ; The Design Process Demystified’ , (4th ed.). Routledge. https://doi.org/10.4324/9780080454979

Leahy, Keelin ; Seifert, Colleen M. ; Daly, Shanna and McKilligan, Seda  (2018) ‘Overcoming Design Fixation in Idea Generation’ , Industrial Design Conference Presentations, Posters and Proceedings. 15

Linsey, J. S. ; Tseng, I. ; Fu, K. ; Cagan, J. ; Wood, K. L. and  Schunn , C. (2010) ‘A Study of Design Fixation, Its Mitigation and Perception in Engineering Design Faculty’ , Journal of Mechanical Design, APRIL 2010, Vol. 132 / 041003-1

Mcdermott, J. (1981) ‘Domain knowledge and the design process’ , 18^th Design automation conference : 580-588.

Moreno, Diana P. ; Hernández, Alberto A. ; Yang,Maria C. ; Linsey, Julie S. and Wood, Kristin L. (2014) ‘A Step Beyond To Overcome Design Fixation: A Design By Analogy Approach’ , Design Computing and Cognition DCC’14. J.S. Gero (ed), © Springer 2014

Ommi, Amirali ;  Zeng,Yong and C. Marsden ,Catharine (2017) ‘Design Problem Perception In Engineering Design Teams’ , CEEA17; Paper 119 University of Toronto; June 4 -7

Reiter-Palmon, Roni and Robinson, Erika J. (2009) Problem identification and construction: What do we know, what is the future?, Psychology Faculty Publications. 28.

Rubenstein, Lisa DaVia ; Callan, Gregory L. ; Neumeister, Kristie Speirs ; Ridgley, Lisa M. and Finch, Maria Hernandez (2020) How problem identification strategies influence creativity outcomes  , Contemporary Educational Psychology 60 (2020) 101840

Sio, Ut Na;  Kotovsky, Kenneth and Cagan, Jonathan (2015). Fixation or inspiration? A meta-analytic review of the role of examples on design processes, Design Studies, Volume 39, 2015, Pages 70-99, ISSN 0142-694X, https://doi.org/10.1016/j.destud.2015.04.004.

Schut, A., Klapwijk, R., Gielen, M., van Doorn, F., & de Vries, M. (2019) ‘Uncovering early indicators of fixation during the concept development stage of children’s design processes’ , International Journal of Technology and Design Education, 30(5) :951-972. https://doi.org/10.1007/s10798-019-09528-2

UYSAL ÜREY, Z.C. (2019) ‘The Cognitive Use of Prior Knowledge in Design Cognition: The Role of Types and Precedents in Architectural Design’ , Journal of Contemporary Urban Affairs, 3(3) : 39-50. https://doi.org/10.25034/ijcua.2019.v3n3-4

Vasconcelos, Luis A. ; Crilly Nathan (2016) ‘Inspiration and fixation: Questions, methods, findings and challenges, Design Studies’ . Volume 42 : 1-32, ISSN 0142-694X . https://doi.org/10.1016/j.destud.2015.11.001. (https://www.sciencedirect.com/science/article/pii/S0142694X15000940)

Viswanathan, Vimal and Linsey, Julie (2011). UNDERSTANDING FIXATION: STUDY ON THE ROLE OF EXPERTISE . ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design.7.

Vries, de, A. E. (1990). Problem solving in design : a comparison of three theories. (OCTO-report; Vol. 9003). Eindhoven University of Technology.

Youmans, R., & Arciszewski, T. (2014) ‘Design fixation: Classifications and modern methods of Prevention’, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 28(2): 129-137.