A 10-Bit Low Power SAR ADC with a New Control Logic Using Monotonic Capacitor-Switching

Majlesi Journal of Telecommunication Devices

مقاله 7، دوره 3، شماره 3، آذر 2014   

نوع مقاله: Articles

نویسندگان

Morteza Rahimi^* ؛ Abbas Golmakani؛ Mohammad Ali Heydari؛ Mohammad Hossein Mesgarof

Department of Electrical Engineering, Sadjad University of Technology, Mashhad, Iran

چکیده

A 10 bit Low power 666KS/s successive approximation register is presented. Monotonic capacitor-switching has been employed to reduce the switching energy power and total capacitance by 81% and 50% respectively. The ADC achieves an SNDR of 53.6 dB and ENOB of 8.61, while the power consumption  and  supply voltage are  0.83mW and 1.2V respectively. all simulations are carried out using cadence simulating software in 0.18um technology.

کلیدواژه‌ها

en

مراجع

[1] C. C. Liu, S. J. Chang, G. Y. Huang, and Y. Z. Lin, “A 0.92 mW 10-bit 50-MS/s SAR ADC in 0.13 m CMOS process,” in IEEE Symp. VLSI Circuits Dig, June 2009.

[2] D. Draxelmayr, “A 6 b 600 MHz 10 mW ADC array in digital 90 nm CMOS,” inIEEE ISSCC Dig. Tech. Papers, Feb 2004.

[3] M. D. Scott, B. E. Boser and K. S. J. Pister, “An Ultralow-Energy ADC for Smart Dust,” IEEE Journal of Solid-State Circuits, vol. 38, no. 7, July 2003.

[4] J. Sauerbrey, D. Schmitt-Landsiedel, and R. Thewes, “A 0.5-v 1-µW Successive Approximation ADC,” IEEE Journal of Solid-State Circuits, vol. 38, no. 7 July 2003.

[5] N. Vermna and A. p. Chandrakasan, “A 25µW 100kS/s 12b ADC for Wireless Micro-Sensor Applications,” ISSCC Dig. Tech. Papers, pp. 222-223, Feb 2006.

[6] J. Craninckx and G. v. d. Plas, “A 65fJ/conversion-step 0-to-50MS/s 0-to-0.7mW 9b Charge-Sharing SAR ADC in 90nm Digital CMOS,” ISSCC Dig. Tech. Papers, Feb 2007.

[7] H. Ch. Hong and G. M. Lee, “A 65-fJ/Conversion-Step 0.9-V 200-kS/s Rail-to-Rail 8-bit Successive Approximation ADC,” IEEE Journal of Solid-State Circuits, vol. 42, no. 10, Oct 2007.

[8] ‌‌‌‌10b 1MS/s Charge-Redistribution ADC,” ISSCC Dig. Tech. Papers, pp. 244-245, Feb 2008.

[9] M. van Elzakker, E. van Tuijl, P. Geraedts, D. Schinkel, E.Klumperink, andB.Nauta,“A1.9 W 4.4 fJ/conversion-step 10b 1 MS/s chargeredistribution ADC,” inIEEE ISSCC Dig. Tech. Papers, Feb 2008.

[10] S. H. Cho, C. K. Lee, J. K. Kwon, and S. T. Ryu, “A 550-mW 10-b 40-MS/s SAR ADC with multistep addition-only digital error correction,”IEEE J. Solid-State Circuits, vol. 46, no. 8, pp. 1–12, Aug 2011.

[11] Chun-Cheng Liu , Soon-Jyh Chang , Guan-Ying Huang , Ying-Zu Lin “A 10-bit 50-MS/s SAR ADC With a Monotonic Capacitor Switching Procedure” ,” IEEE Journal of Solid-State Circuits, APRIL 2010.

[12] Pascal Meinerzhagen,” Design of a 12-bit low-power SAR A/D Converter for a Neurochip” Master’s Thesis University of California 2008.

[13] S. W. M. Chen and R. W. Brodersen, “A 6-bit 600-MS/s 5.3-mW asynchronous ADC in 0.13- m CMOS,” inIEEE ISSCC Dig. Tech. Papers, Feb 2006.

[14] Jianhua Gan, B.S., M.S., Sc.D. “Non-Binary Capacitor Array Calibration for a High Performance Successive ApproximationAnalog-to-Digital Convert” dissertation the University of Texas at Austin 2003.