Improving Interrupter Synchronization in CIPS Cathodic Protection Test for Gas Transmission Pipelines

Majlesi Journal of Telecommunication Devices

مقاله 1، دوره 8، شماره 4، اسفند 2019، صفحه 135-140   

نوع مقاله: Articles

نویسندگان

Majid Nosouhi^* ؛ Mohsen Ashourian؛ Hamid Nazemi

Majlesi Branch, Islamic Azad University

چکیده

Corrsion  is one of the most important problems which underground gas pipelines is facing it . Cathodic protection systems are dynamic systems that use electrical current to control corrosion. According to the existing standards there are different methods for evaluating level of cathodic protection  and coverings underground metal pipes.  One of the most practical methods is the close interval potential survey (CIPS).The efficiency of this method is very dependent on the quality of measuring parameter during the inspection.   minimising all the error source , either during the inspection or when interpreting  the data is vital. In this research CIPS method is analyzed and by optimizing synchronization of  the Interrupter devices  to decrease the errors during the CIPS test, in evaluating of cothodic  protection level and covering  the gas transmission underground metal pipes  provides a significant improvement.

کلیدواژه‌ها

Cathodic protecticn؛ CIPS؛ GPS؛ Interrupter

مراجع

[1] B.Ahangari, “Corrosion detection and protection in gas and oil pipelines”, Naghoos Press,1386.(in Persian)

[2] Research and industrial group parsianfanyaran, “DCVG-based coating inspection course”,NIGC press,1389.(in Persian)

[3] M.hashemi,E.khalili,“operating and maintenance of cathodic protection systems”,NIGC press,1394. (in Persian)

[4] S. Guan, “ Advanced 100% Solids Rigid Polyurethane Coating Technology for Pipeline Field Joint and Rehabilitation”, NACE Corrosion Papers, 2003, Paper No.03043.

[5] J. Geiser, D. Wessling, “ Local Cathodic Protection for Compressor Stations and Industrial Plants”, Germany, Vulkan Publishing Co, 2001.

[6] A. Aghajani , A. Saatchi, “ Correcting Nonuniform CP Potential Distribution and Interference Problems in a Gas Compressor Station”, Material Performance, 53, 4, 2014, 24-27.

[7] Y. Du, L. Wang, L. Dong, M. Lu, “Key Technologies in Regional Cathodic Protection in Oil & Gas Stations”, Corrosion, Texas, U.S.A, 2014.

[8] P. R. Roberge, “ Handbook of Corrosion Engineering”, USA, McGraw-Hill, 1999

[9] S. papavinasam, chapter11-monitoring-“ external corrosion, corrosion control in the oil and gas industry”, 2014, page715-750.

[10] Nehad El-Sherif; Michael Nilson; Robert Zweifel , “Reducing Electrocutions in Industry: Application of a Class C Ground-Fault Current Interrupter in a Pulp and Paper Plant ”, IEEE Industry Applications Magazine Year: 2015, Volume: 21, Issue: 1 Pages: 49 - 53 .

[11] A. J. Kidnay, W. R. Parrish, D. G. McCartney, “ Fundamentals of Natural Gas Processing”, Second Edition, CRC Press Taylor & Francis Group, Boca Raton, FL, USA, 2011, 552 p.

[12] B. S. Wyatt, “ 4.23-cathodic protection instrumentation, shreirs corrosion”, volume 4 : management and control of corrosion, 2010, pages 2839-2856.

[13] P. Hopkins, 3 –“ Assessing the significance of corrosion in onshore oil and gas pipelines”,Underground Pipeline Corrosion, 2014, Pages 62–84.

[14] AmeerAmeer H. Morad, “GPS Talking for Blind People”, Journal of Emerging Technologies in Web Intelligence, Volume 2, No.3, August 2010.

[15] www.gpsinformation.org/dale/nmea.htm

[16] Elliott D Kaplan and Christopher Hegarty,“Understanding GPS: Principles and Applications”, Artech House,2nd ed., 2006.

[17] GNSS Module Series Rev. L86_Hardware_Design_V1.0 Date: 2014-09-04, www.cuectel.com

[18] NACE International The Corrosion Society ©1967, 2001 by NACE International Second Edition 2001.

[19] D Ibrahim, “Design of a GPS data logger device with street-level map interface”, Advances in Engineering Software, vol. 41, pp. 859-864, Jun 2010