Effects of Linear Induction Motor Parameters in Its Optimum Design Based on Finite Element Method

Majlesi Journal of Electrical Engineering

مقاله 1، دوره 3، شماره 1، فروردین 2009، صفحه 1-10   

نوع مقاله: Review Article

شناسه دیجیتال (DOI): 10.1234/mjee.v3i1.183

نویسندگان

Mehrdad JafarBoland^* ؛ AbdolAmir Nekoubin

Maleke Ashtar University

چکیده

Effective parameters in performance of linear induction motors such asair gap, number of poles and the thickness of secondary must be selected and optimized to increase power coefficients and motor performance significantly. In this paper a double sided linear induction motor in different conditions is designed and next by finite element method analyzed. Then for comparing analytical model and numerical model a linear motor using Matlab software is simulated in different condition. It is clear from the results that with optimal value of effective parameters, power losses decreased the performance of motor is improved and efficiency of linear motor is increased.

کلیدواژه‌ها

Air gap؛ en؛ Number of Pole؛ Thickness of Secondary؛ Linear Motors

مراجع

[1] J. Han, Y. Li, Y. Du, W. Xu; “Dynamic

Characteristics Study of Single-Sided

Linear Induction Motor with Finite

Element Method”, IEEE/ASME International

Conference on Advanced Intelligent

Mechatronics, Vol. 15, pp. 439 - 444, 2-5 July

2008.

[2] Ch. I. Huang, L. Ch. Fu; “Adaptive approach

to motion controller of linear induction

motor with friction compensation”,

IEEE/ASME Transactions on Mechatronics,

Vol. 12, Aug 2007.

[3] T. S. Ch. Park, W. L, K. M. Kim; “Analysis

of Linear Induction Motors for MAGLEV

According to the Secondary Conductor

Structure”, International Conference on

Electrical Machines and Systems, pp. 1995–

1998, 8-11 Oct. 2007.

[4] F. J. Lin, L. T. Teng, Ch. K. Chang;

“Adaptive Backstepping Control for Linear

Induction Motor Drive Using FPGA”

Annual Conference on IEEE Industrial

Electronics, Vol. 6 , pp. 1269 – 1274,Nov

2006.

[5] R. J. Wai; Ch. Ch. Chu; “Indirect Field-

Oriented Linear Induction Motor Drive

with Petri Fuzzy-Neural-Network Control”,

IEEE International Conference on Neural

Networks, Vol. 1, 31 July-4, pp. 378 - 383,

Aug. 2005.

[6] E. Medici, D. Serrano; “Finite Element

Simulations of Berdut Linear Motor”, XIV

Congress on Numerical Methods and their

Applications, Bariloche, Argentina, November

2004.

[7] E. F. da Silva, Charles C. dos Santos; “Field

Oriented Control of Linear Induction

Motor Taking into Account End Effects”,

The 8th IEEE International Workshop on 25-

28 March 2004.

[8] S. Bala; “Analysis of a Linear Induction

Motor with Double-Sided Primary and

Sheet Secondary”, Electric Machines and

Drives Conference, Vol.4, pp. 1912-1917,

April 2002.

[9] W. Kim, B. C. Murphy; “Design and

Construction of a Novel tubular Linear

Motor with Controller for Robotics

Applications”, Engineering Congress &

Exposition Proceedings of IMECE’03, 2003

ASME International Mechanical Engineering

Congress, November 2003.