Improving the Mitigation of Voltage Flicker by Usage of Fuzzy Control in a Distribution Static Synchronous Compensator (DSTATCOM)

Majlesi Journal of Electrical Engineering

مقاله 4، دوره 3، شماره 2، خرداد 2009، صفحه 25-35   

نوع مقاله: Review Article

شناسه دیجیتال (DOI): 10.1234/mjee.v3i2.288

نویسندگان

Ghazanfar Shahgholiyan^* ؛ Ebrahim Haghjou؛ Saeed Abazari

IAU NajafAbad University

چکیده

This paper presents a study about of a fuzzy Controlled STATCOM,  which can be applied for mitigation of the voltage flicker in a distribution system. The voltage flicker is produced by a large variable load absorbing continuously changing currents such as an arc furnace. The DSTATCOM includes a voltage-sourced PWM inverter and its control system. The control strategy of the DSTATCOM plays an important role in maintaining the voltage flicker. Here, the DSTATCOM controller is designed with two types of controllers, linear proportional-integral (PI) and nonlinear fuzzy logic. The simulation of the DSTATCOM with 3MVar reactive power on a 25 KV distribution network is carried out in MATLAB/SIMULINK software. Finaly, fuzzy controllers were evaluated by comparing its performance with the PI controllers. It is observed that the fuzzy controllers are very superior in mitigating  the voltage flicker.

کلیدواژه‌ها

DSTATCOM؛ en؛ Voltage Flicker؛ Fuzzy controller؛ PI controller

مراجع

[1] J. A. Martinez, J. Martin-Arnedo; “Voltage

Sag Studies in Distribution Networks-

PartII: Voltage Sag Assessment”, IEEE

Trns. Power Del., Vol. 21, No. 3, pp.1679-

1688, Jul. 2006.

[2] Elnady, M. A. Salama; “Unified Approach

for Mitigation Voltage Sag and Voltage

Flicker Using the DSTATCOM”, IEEE

Trns. Power Del., Vol. 20, No. 2, pp.992-

1000, 2005.

[3] Ghosh, G. Ledwich; “Application of Power

Electronics to Power Disturtion Systems”,

IEEE Tutorial Course, 2006.

[4] Y. H. Chrmg, G. H. Kwon, T. B. Park;

“Voltage Sag and Swell Generator for the

Evaluation of Custom Power Device”, IEEE

Conference, pp.2503-2507, 2003.

[5] Ghosh, G. Ledwich; “Load compensating

DSTATCOM in weak AC systems”, IEEE

Trns. Power Del., Vol. 18, Issue: 4, pp.1302-

1309, Oct. 2003.

[6] H. Masdi, N. Mariun, S. Mahmud, A.

Mohamed, S. Yusuf; “Design of a Prototype

DSTATCOM for Voltage Sag Mitigation”,

IEEE Notional Power and Energy Conference,

pp.61-66, Nov.2004.

[7] P. S. Sensarma, K. R. Padiyar, V. Ramnarayanan;

“Analysis and Performance

Evaluation of a Distribution STATCOM

for Compensating Voltage Fluctuation”,

IEEE Trans. Power Delivery, Vol. 16, No. 2,

pp. 259-264, April 2001.

[8] G. C. Montanari, M. Loggini, A. Gavallini, L.

Piti, D. Zaninelli; “Arc Furnance Model for

the Study of Flicker Compensation in

Electrical Networks”, IEEE Trns. Power

Delivery, Vol. 9, pp.2026-2036, 1994.