Topology Selection and Optimization of a Linear Permanent Magnet Synchronous Motor for Precise Applications

Majlesi Journal of Electrical Engineering

مقاله 8، دوره 3، شماره 2، خرداد 2009، صفحه 61-72   

نوع مقاله: Review Article

شناسه دیجیتال (DOI): 10.1234/mjee.v3i2.292

نویسندگان

arash hassanpour^* ؛ Sadegh VaezZadeh

چکیده

Linear permanent magnet synchronous motors are increasingly used in industrial application. Proper performance of these motors requires appropriate design and construction of them. This paper presents the suitable topology selection and optimal design of a linear permanent magnet synchronous motor for precise applications. For this, a comprehensive analysis is done on different topologies of this kind of machines and their benefits and drawbacks are discussed in details. The proper topology is then selected and modeled via layer method. The permanent magnet poles of a typical motor are then optimized using this model to reduce the consumed permanent magnet material and therefore reducing the cost. The performance of the optimal motor is finally assessed by finite element method demonstrating the validity of the proposed method. 

کلیدواژه‌ها

Linear Motors؛ en؛ Permanent Magnet؛ Synchronous motors؛ Topology؛ Optimization؛ Precise Applications

مراجع

[1] J. F. Gieras, Z. J. Piech; Linear Synchronous

Motors: Transportation and Automation

Systems. Boca Raton, FL: CRC Press, 2000.

[2] J. Wang, D. Howe; “Design Optimization

of Radially Magnetized, Iron-Cored,

Tubular Permanent-Magnet Machines

and Drive Systems”, IEEE Trans. Magn.,

Vol. 40, pp. 3262-3277, Sept. 2004.

[3] A. Boldea, S. Nasar; Linear

Electromagnetic Devices, Taylor & Francis,

2001.

[4] S. A. Nasar, I. Boldea; Linear Electric

Actuators and Generators, Cambridge

University Press, 1997.

[5] M. J. Chung, D. G. Gweon; “Modeling of

Armature Slotting Effect in Magnetic

Filed Disturbtion of Linear Permanent

Magnet Motor”, Electrical Engineering

Journal, Vol. 84, pp.101-108, Springerverlag,

2002.

[6] D. B. Montgomery, “Overview of the 2004

Magplane Design”, Magplane Technology,

Inc, Tech. Rep., 2004.

[7] G. H. Kang, J. P. Hong, G. T. Kim, “A

Novel Design of an Air-Core Type

Permanent Magnet Linear Brushless

Motor by Space Harmonics Field

Analysis”, IEEE Trans. Magn., Vol. 37, pp.

3732-3736, Sept. 2001.

[8] A. Hassanpour Isfahani, S. Vaez-Zadeh;

“Design Optimization of a Linear

Permanent Magnet Synchronous Motor

for Extra Low Force Pulsations”, Journal

of Energy Conversion and Management,

Vol. 48, pp. 443-449, 2007.

[9] M. Andriollo, et al; “Design Optimization

of Slotless Linear PM Motors”, in Proc. of

4th international symposium on linear drives

for industry applications, LDIA 2003,

Birmingham, UK, 8-10 Sept. 2003, pp. 203-

206.

[10] J. Kim, et al; “Static Characteristics of

Linear BLDC Motor Using Equivalent

Magnetic Circuit and Finite Element

Method”, IEEE Trans. Magnetic., Vol. 40,

pp. 742-745. Mar. 2004.

[11] S. Vaez-Zadeh, A. Hassanpour Isfahani;

“Multi-objective Design Optimization of

Air-Core Linear Permanent-Magnet

Synchronous Motors for Improved Thrust

and Low Magnet Consumption”, IEEE

Trans. Magn.,Vol. 42, pp. 446-452, March

2006.

[12] I. S. Jung, S. Y. Yoon, J. H. Shim, D. S.

Hyun; “Analysis of Forces in a Short

Primary Type and a Short Secondary

Type Permanent Magnet Linear

Synchronous Motor”, IEEE, pp. MC1-8.1-

MC1-8.3, 1997.

[13] S. M. Jang, D. J. You, S. H. Lee, H. W. Cho,

W. B. Jang; “Design and Analysis of Three

Types for Permanent Magnet Linear

Synchronous Machine”, in Proc. Sixth Int.

Conf. on Electrical Machines and Systems,

ICEMS, Vol. 1, Beijing, China, 9-11 Nov,

2003, pp. 31-33.

[14] Stumberger, D. Zarko, M. T. Aydemir, T. A.

Lipo; “Design and Comparison of Linear

Synchronous Motor and Linear Induction

Motor for Electromagnetic Aircraft

Launch System”, in Proc. IEEE Int. Electric

Machines and Drives Conference, IEMDC,

Vol. 1, Madison, Wisconsin, USA, June 1-4,

2003, pp. 494-500.

[15] S. M. Jang, S. H. Lee, H. W. Cho, S. K Cho;

“Design and Analysis of Helical Motion

Permanent Magnet Motor with

Cylindrical Hal Bach Array” IEEE Trans.

Magn. Vol. 39, pp. 3007-3009, Sept. 2004.

[16] M. J. Chung, M.G. Lee, S. Q. Lee, S. M.

Kim Dae-Gab Gweon; “Analytical

Representation of Cogging Force in

Linear Brushless Permanent Magnet

Motor”, Proc. of the ICMT'99, pp. 310-314.

Oct. 1999.

[17] J. Wang, D. Howe, G. W. Jewell; “Analysis

and Design Optimization of an Improved

Axially Magnetized Tubular Permanent

Magnet Machine”, IEEE Trans. Eng. Conv.

Vol. 19, pp. 289-295, Jun. 2004.

[18] Z. Deng, I. Boldea, S. A. Nasar, “Field in

Permanent Magnet Linear Synchronous

Machines”, IEEE Trans. Magn., Vol. 22, pp.

107-112, Mar. 1986.

19 ] آرش حسنپور اصفهانی، ”مدلسازی، طراحی و بهینه ]

سازی موتور سنکرون آهنربای دائم خطی“، پایاننامه

. کارشناسی ارشد، دانشگاه تهران، شهریور 1384