Compensation for Power Quality Improvement in Electric Arc Furnace with Considering Economic Index

Majlesi Journal of Electrical Engineering

مقاله 8، دوره 6، شماره 1، خرداد 2012   

نوع مقاله: Review Article

نویسندگان

Ghazanfar Shahgholian^* ؛ Maryam Golibagh

Compensation for Power Quality Improvement in Electric Arc Furnace with Considering Economic Index

چکیده

In recent years, on the one hand with increasing application of nonlinear loads in power systems and no sinusoidal currents that extracted from system, and on the other hand increasing loads sensitive to power quality and destructive effects of nonlinear loads on power quality of power systems, compensation these loads has been converted to one of the main issues in power systems. The use of flexible AC transmission system (FACTS) devices is one of the most progressive methods which are used for improving power quality. In this paper, series and parallel compensators of static synchronous compensator (STATCOM) and dynamic voltage restorer (DVR) are introduced and the comparison of these two in compensating of power quality phenomena from electric arc furnace is provided. STATCOM is a shunt active filter and DVR is a series active filter. Method which has been selected for control of every one of these devices is an optimal control way that it minimizes power losses..

کلیدواژه‌ها

instruments FACTS؛ en؛ STATCOM

مراجع

[1] A. Esfandiari, M. Parniani, H. Mokhtari, “Mitigation of electric arc furnace disturbances using the unified power quality conditioner”, IEEE/IECON, Vol.2, pp.1469-1474, Nov. 2004.

[2] Y.J. Hsu, K.H. Chen, P.Y. Huang, C.N. Lu, “Electric arc furnace voltage flicker analysis and prediction”, IEEE Trans. on Inst. and Meas., No.99, pp.1-9, April 2011.

[3] P. Shafaghi, G. Shahgholian, A. Etesami, S. Khalili, “The Effect of Corrosion of Electrodes in the Electric Arc Furnaces Model”, IEEE/ICCEE, pp.35-39, Dece. 2009.

[4] J. Ruiz, J. Ubierna, A. Aramendi, E. Leturiondo, L.A. Amantegui, “PC based multichannel system for real time harmonics and flicker measuring”, IEEE/MELCON, pp.968-971, Apr. 1994.

[5] L. Xiuhe, Y. Guang, S. Wei, “Harmonic current detection of electric arc furnace system based on the method of eliminating zero-sequence component”, IEEE/ICICTA, Vol.1, pp.431-433, March 2011.

[6] J.L. Guan, M.T. Yang, J.C. Gu, H.H. Chang, C.L. Huang, “The effect of harmonic power fluctuation for estimating flicker”, Wor. Acad. of Sci., Eng. and Tec., Vol.28, pp.200-205, 2007.

[7] Y. Djeghader, H. Labar, K. Bounaya, “Analysis of harmonics generated by different structures of a DC EAF”, Int. Rev. of Ele. Eng. (IREE), Vol.1, No.1, Oct. 2008.

[8] G.W. Chang, C.I. Chen, Y.J. Liu, “A neural-network-based method of modeling electric arc furnace load for power engineering study”, IEEE Trans. on Pow. Sys., Vol.25, No.1, pp.138-146, Feb. 2010.

[9] A.A. Gomez, J.J.M. Durango, A.E. Mejia, “Electric arc furnace modeling for power quality analysis”, IEEE/ANDESCON, pp.1-6, Sep. 2010.

[10] K. Anuradha, B.P. Muni, A.D.R. Kumar, “Modeling of electric arc furnace and control algorithms for voltage flicker mitigation using DSTATCOM”, IEEE/IPEMC, pp.1123-1129, Wuhan, May 2009.

[11] A. Roghani Araghi, S. H. Hosseinian, A. Doroudi, I. Salabeigi, “A novel approach to cable’s and line’s sizing in distribution system based on flicker effect”, Int. Rev. of Ele. Eng. (IREE),Vol.2, No.6, pp., Dec. 2009.

[12] H. Fujita, H. Akagi, “A practical approach to harmonic compensation in power systems-series connection of passive and active filters”, IEEE Trans. on Ind. Appl., Vol.27, No.6, Nov./Des. 1991.

[13] J. Dolezal, A.G. Castillo, J. Tlusty, V. Valouch, “Topologies and control of active filters for flicker compensation”, IEEE/ISIE, Vol.1, pp.90-95, Aug. 2000.

[14] K. Sadigh, A. Hosseini, S.H. Farasat, M. Mokhtarpour, “Voltage flicker mitigation with dynamic voltage restorer”, IEEE/PEDSTC, pp.388-392, Feb. 2010.

[15] M. Routimo, A. Makinen, M. Salo, R. Seesvuori, J. Kiviranta, H. Tuusa, “Flicker mitigation with a hybrid compensator”, IEEE Trans. on Ind. Appl., Vol.44, No.4, pp.1227-1238, July/Aug. 2008.

[16] M. Gonzalez, V. Cardenas, N. Visairo, “Voltage regulation with a dynamic voltage restorer using reactive power for low DC energy storage utilization”, , Int. Rev. of Ele. Eng. (IREE),Vol.4, No.1, pp.75-85, Jan. 2009.

[17] G. Shahgholian, “Development of state space model and control of the STATCOM for improvement of damping in a single-machine infinite-bus”, Int. Rev. of Ele. Eng.(IREE), Vol.4, No.6, pp.1367-1375, Nov./Dec. 2009.

[18] Y.F. Wang, J.G.Jiang, L.S.Ge, X.J.Yang, “Mitigation of electric arc furnace voltage flicker using static synchronous compensator”, IEEE/IPEMC, 2006.