Optimal Placement of DG to Improve the Reliability of Distribution Systems Considering Time Varying Loads using Genetic Algorithm

Majlesi Journal of Electrical Engineering

مقاله 3، دوره 7، شماره 1، خرداد 2013   

نوع مقاله: Review Article

نویسندگان

Zahra Boor^* ؛ Seyyed Mehdi Hosseini

- Department of Electrical Engineering, Babol Noshirvani University of Technology, Babol, Iran

چکیده

This paper presents determination of optimum size and location of distributed generators (DGs) for reliability improvement of distribution systems in the presence of time varying loads using Genetic Algorithm (GA). The main innovation of this paper is considering of annual load duration curve for determination of size and location of DGs for reliability improvement. For this purpose a load duration curve including four load levels with different weighting factor is considered. For reliability assessment, the customer-oriented reliability indices such as SAIFI, SAIDI, CAIDI, ASUI and also load- and energy-oriented indices such as ENS are evaluated. In this paper, the effects of system reconfiguration and load shedding are also considered for reliability improvement. The best size and location of DGs in distribution systems is determined based on different reliability indices, separately. The effectiveness of the proposed algorithm is examined on a standard distribution systems consisting of 33 nodes and comparative studies are conducted in the different cases to investigate the impacts of optimal DGs placement and its size determination on reliability improvement. The results obtained show the effectiveness of the proposed method for reliability improvement.  

کلیدواژه‌ها

distributed generation؛ en؛ Genetic Algorithm؛ reliability؛ Time Varying Loads

مراجع

[1] IEEE Trial-Use Guide for Electric Power Distribution Reliability Indices, IEEE 1366-1998, 1999.

[2] C. L. T. Borges and D. M. Falcao, “Optimal Distributed Generation Allocation for Reliability, Losses and Voltage Improvement,” Federal University of Rio de Jeneiro, Elsevier Ltd, 2006.

[3] F. Pilo, G. Celli, and S. Mocci, “Improvement of reliability in active networks with intentional islanding,” in Proc. of IEEE International Conference, Hong Kong, vol. 2, pp. 474 - 479, 2004.

[4] H. Falaghi, and M. R. Haghifam, “Distributed Generation Impacts on Electric Distribution Systems Reliability: Sensitivity Analysis,” The International Conference on Computer as a Tool, EUROCON, vol. 2, pp. 1465-1468, Nov. 2005.

[5] C. L. T. Borges, and D. M. Falcao, “Impact of distributed generation allocation and sizing on reliability, losses and voltage profile,” Power Tech Conference Proceedings, IEEE Bologna , vol.2, pp.23-26, June. 2003.

[6] I. S. Bae and J. O. Kim, “Reliability Evaluation of Distributed Generation Based on Operation Mode,” IEEE Trans. power systems, vol. 22, pp. 785-790, May. 2007.

[7] M. Hlatshwayo, S. Chowdhury, S. P. Chowdhury, and K. O. Awodele, “Reliability Enhancement of Radial Distribution Systems with DG Penetration,” 45th International Universities Power Engineering Conference (UPEC), pp. 1-6, Sept. 2010.

[8] I. Ziari, G. Ledwich, A. Ghosh, D. Cornforth, and M. Wishart, “Optimal Allocation and Sizing of DGs in Distribution Networks,” Power and Energy Society General Meeting, IEEE, pp 1-8, July. 2010.

[9] T. Gozel and M. H. Hocaoglu, “An analytical method for the sizing and siting of distributed generators in radial systems,” Elect. Power Syst. Res., vol. 79, pp. 912–918, Jul. 2009.

[10] C. L. T. Borges and D. M. Falcao, “Optimal distributed generation allocation for reliability, losses, and voltage improvement,” Int. J. Elect. Power Energy Syst., vol. 28, pp. 413–420, Jul. 2006.

[11] R. Billinton, “Reliability Evaluation of Electrical Power Systems,” University of Saskatchewan Saskatoon, Canada, October 2004.

[12] K. Xie, J. Zhou, and R. Billinton, “Reliability evaluation algorithm for complex medium voltage electrical distribution networks based on the shortest path,” IEE Proc.-Gener Transm. Distrib. vol. 150, pp. 686-690, Nov. 2003.

[13] P. Wang and R. Billinton, “Optimum load shedding technique to reduce the total customer interruption cost in a distribution system,” , IEE Proc. Gener. Distrib., vol. 147, pp. 51-56, Jan. 2000.

[14] T. S. Chung and H. C. Leung, “A genetic algorithm approach in optimal capacitor selection with harmonic distortion considerations,” Electrical Power and Energy Systems, vol. 21, pp. 561–569, Nov. 1999.

[15] R. P. Broadwater, J. C. Thompson, S. Rahman, and A. Sargent, “An expert system for integrated protection design with configurable distribution circuits: Part I,” IEEE Trans. Power Del., vol. 9, pp. 1115–1121, Apr. 1994.

[16] M. E. Baran and F. F. Wu, “Network reconfiguration in distribution systems for loss reduction and load balancing,” IEEE Trans. Power Delivery, vol. 4, pp. 1401-1407, April, 1989.

[17] R. Billinton and S. Jonnavithula, “A test System For Teaching Overall Power System reliability Assessment,” IEEE Trans. Power Syst., vol. 11, pp. 1670-1676, Nov. 1996.

[18] R. Billinton and R. N. Allan, “Probabilistic Assessment of Power Systems,” IEEE Proc., vol. 88, pp. 140-162, Feb. 2000.

[19] R. Billinton and R. N. Allan, “ Reliability evaluation of power system,” Plenum Press New York, Second Edition, 1996.

[20] H. Zareipour, K. Bhattacharya, and C. A. Canizares “Distributed Generation: Current Status and Challenges,” Annual North American Power Symposium (NAPS), pp. 1-8, Aug. 2004.