Sliding-mode MRAS Speed Estimator for Sensorless Vector Control of Double Stator Induction Motor

Majlesi Journal of Electrical Engineering

مقاله 6، دوره 12، شماره 3، آذر 2018، صفحه 41-53   

نوع مقاله: Review Article

نویسندگان

Houari Khouidmi^{* 1}؛ Ahmed Benzouaoui²؛ Boubaker Bessedik²

¹Associate professor

²Assistant Professor

چکیده

The weakness of the Direct Vector Control (DVC) is lack of an estimation of the flux amplitude and the rotor position with high accuracy. These quantities are sensitive to parameter variations; it is important to use a robust estimation system for estimating the rotor flux with respect to parametric uncertainties. In this paper the sliding mode speed sensorless vector control based on the Model Reference Adaptive System (MRAS) of double stator induction motor is presented. First, the models of the double stator induction motor and the DVC are proposed. Second, the MRAS technique of the DSIM (Double Stator Induction Motor) is adopted. In order to ensure a robust sensorless control, the sliding mode technique for the estimation system was used. The results showed the presented estimator has a positive effect on the system behavior especially in changing the reference and/or the parameters variation.

کلیدواژه‌ها

Double Stator Induction Motor؛ Direct Field Oriented Control؛ Model Reference Adaptive System؛ sliding mode control؛ Sensorless control

مراجع

[1] P.Vas. “Sensorless Vector and Direct Torque Control”, Oxford University Press, Oxford, 1998.

[2] M.Menaa, O.Touhami, R. Ibtiouen, M.Fadel, “Sensorless direct vector control of an induction motor”. Control Engineering Practice, 2008, Vol.16, pp.67-77.

[3] R.Kianinezhad, B.Nahid-Mobarakeh, F.Betin, G.A.Capolino, “Sensorless field-oriented control for six phase induction machines”. IEEE Trans. on Ind. Appl, 2005, Vol.71, pp.999-1006.

[4] H. Khouidmi, A. Massoum, “Reduced-order Sliding Mode Observer Based Speed Sensorless Vector Control of Double Stator Induction Motor”, Journal of Applied Sciences, Acta Polytechnica Hungarica, 2014,Vol.11, (06), pp229-249.

[5] R.Nilsen, M.P.Kazmierkowski, “Reduced-order observer with parameter adaptation for fast rotor flux estimation in induction machine”. IEE Proceedings, 1989, Vol. 136,(1), pp.35-43.

[6] K. Marouani, K. Chakou, F. Khoucha, B. Tabache, and A. Kheloui, “Observation and Measurement of Magnetic Flux in a Dual Star Induction Machine”, 19th Mediterranean Conference on Control and Automation Aquis Corfu Holiday Palace, Corfu, Greece June 20-23, (2011) 289-294.

[7] M. Rizwan Khan, I.Atif, A.Mukhtar, “MRAS-based sensorless control of a vector controlled five-phase induction motor drive”. Electric Power Systems Research, 2008, Vol.78, pp.1311–1321.

[8] DJ. Cherifi, Y. Miloud and A.Tahri, “Performance Evaluation Of A Sensorless Induction Motor Drive Using A MRAS Speed Observer”, Journal of Current Research in Science, 2013, Vol.1, (2), pp71-78.

[9] K. Kouzi, T. Seghier and A. Natouri, “Fuzzy Speed Sensorless Vector Control of Dual Star Induction Motor Drive Using MRAS Approach”, International Journal of Electronics and Electrical Engineering, 2015, Vol.3, (6), pp445-450.

[10] A. F. Filippov, “Differential equations with discontinuous right-hand side”, Matematicheski Sbornik, Vol. 51, No. 01, pp. 99–128, 1960.

[11] J. J. Slotine, J. K. Hedrick, E. A. Mizawa, "On sliding observer for nonlinear systems", J. Dynam. Syst. Measur. Contr., Vol. 01, pp. 239/245, 1985.

[12] H. Khouidmi, A. Massoum and A. Meroufel, “Dual Star Induction Motor Drive: Modelling, Supplying and Control”, International Journal of Electrical and Power Engineering, 2011, Vol.05, 28-34.

[13] R. Sadouni, A. Meroufel, “Indirect Rotor Field-oriented Control (IRFOC) of a Dual Star Induction Machine (DSIM) Using a Fuzzy Controller”, Journal of Applied Sciences, Acta Polytechnica Hungarica, 2012, Vol.9, (04), pp177-192.

[14] B. Ghalem, A. Bendiabdellah, “Six-Phase Matrix Converter Fed Double Star Induction Motor”, Journal of Applied Sciences, Acta Polytechnica Hungarica, 2010,Vol.7, (03), pp163-176.

[15] F. Blaschke, “The principle of field orientation applied to the new trans-vector closed-loop control system for rotating field machines”, Siemens-Review, 39, 1972, pp. 217-220.

[16] C. Shauder, “Adaptive speed identification for vector control of induction motors without rotational transducers”, IEEE Transations on Industry Applications 1992;28:1054-1061.