Four-Leg VSI Based DSTATCOM for Compensating Nonlinear and Unbalanced Loads

Majlesi Journal of Electrical Engineering

مقاله 8، دوره 12، شماره 4، اسفند 2018، صفحه 47-55   

نوع مقاله: Review Article

نویسندگان

S. R. Reddy^{* 1}؛ P. V. Prasad²؛ G.N. Srinivas³

¹Department of Electrical Engineering,GNITC, Ibrahimpatnam, Hyderabad, India

²Department of Electrical Engineering,CBIT, Gandipet, Hyderabad, India

³Department of Electrical Engineering, JNTUCH, Hyderabad, India

چکیده

This paper presents a study on the four-leg VSI based distribution static compensator (D-STATCOM) for compensation of neutral, source & PCC current harmonic distortion, PCC voltage regulation and compensation of unbalanced in current waveform. This solution could be used for three-phase four-wire nonlinear and unbalanced load medium voltage distribution system. The proposed control algorithm is developed based on synchronous reference frame theory with the PI controller. The obtained reference current signal from control algorithm is compared in hysteresis band current controller for a better switching of the D-STATCOM. The performance of the system with implementing the D-STATCOM is also analyzed and compared. The proposed control method is implemented on 11/0.4kv medium voltage distribution system and provided effective compensation for reactive power and harmonic distortion mitigation. The simulation results are obtained using MATLAB/SIMULINK.

کلیدواژه‌ها

Distribution static compensator (D-STATCOM)؛ Synchronous reference frame (SRF) theory؛ PI controller؛ voltage source inverter (VSI)؛ hysteresis current controller؛ Harmonic Distortion

مراجع

[1] J. B. Bose, “Global energy scenario and impact of power electronics in 21st. century,” IEEE Trans. Ind. Electron., vol. 60, no. 7, pp. 2638-2651, July 2013.

[2] Phipps JK, Nelson JP, Sen PK., “Power quality and harmonic distortion on distribution systems,” IEEE Trans Ind Appl 1994;30:476-84.

[3] Hive S, Chatterjee K, Fernandes BG. VAr compensation and elimination harmonics in three-phase four-wire system based on unified constant frequency integration control. In: IEEE 11th international conference on harmonics and quality of, power; 2004. p. 647–51.

[4] George M, Basu KP. Modelling and control of three-phase shunt active power filter. Am. J. Appl Sci. 2008; 5(5):1064–70.

[5] Acha E, Agelids V, Anaya-Lara O, Miller T. Power electronic control in electric systems. 1st ed. Oxford: Newness Power engineering series; 2002.

[6] Manoj Kumar M.V, and. Mishra, Mahesh K, “Three-Leg Inverter Based distribution static compensator Topology for Compensating Unbalanced and Nonlinear Loads”, IET power electronics., vol.8,no.11, pp.2076-2084,nov 2015.

[7] Akagi H, Watanabe EH, Aredes M. Instantaneous power theory and applications to power conditioning. New Jersey, USA: John Wiley & Sons; 2007.

[8] Fuchs EwaldF, Mausoum Mohammad AS. Power Quality in Power Systems and Electrical Machines. London, UK: Elsevier Academic Press; 2008.

[9] A. Ghosh and Gerard Ledwich, “Power Quality Enhancement Using Custon Power Devices”, Kluwer Academic Publishers, USA, 2002April 1955.

[10] B. Singh, P. Jayaprakash, T. R. Somayajulu, and D. Kothari, “Reduced rating VSC with a zig-zag transformer for current compensation in a three-phase four-wire distribution system,” IEEE Trans. on Power Del.,vol. 24, no. 1, pp. 249–259, Jan. 2009.

[11] B. Singh, P. Jayaprakash, and D. Kothari, “A T-connected transformer and three-leg VSC based DSTATCOM for power quality improvement,”IEEE Trans. on Power Electron., vol. 23, no. 6, pp. 2710–2718, Nov.2008.

[12] B. Singh, P. Jayaprakash, D. Kothari, A. Chandra, and K. Al Haddad,“Comprehensive study of DSTATCOM configurations,” IEEE Trans. On Ind. Informatics, vol. 10, no. 2, pp. 854–870, May 2014.

[13] B. Singh, S. Arya, C. Jain, and S. Goel, “Implementation of four-leg distribution static compensator,” IET Generation Transmission Distribution,vol. 8, no. 6, pp. 1127–1139, Jun. 2014.

[14] Mahesh K. Mishra, A. Ghosh, A. Joshi, and H. Suryawanshi, “A novel method of load compensation under unbalanced and distorted voltages,”IEEE Trans. on Power Del., vol. 22, no. 1, pp. 288–295, Jan. 2007.

[15] S. Karanki, N. Geddada, Mahesh K. Mishra, and B. Kumar, “A DSTATCOM topology with reduced dc-link voltage rating for load compensation with nonstiff source,” IEEE Trans. on Power Electron.,vol. 27, no. 3, pp. 1201–1211, Mar. 2012.

[16] A. Bhattacharya, C. Chakraborty, and S. Bhattacharya, “Parallel connected shunt hybrid active power filters operating at different switching frequencies for improved performance,” IEEE Trans. on Ind. Electron., vol. 59, no. 11, pp. 4007–4019, Nov. 2012.

[17] S. Srikanthan and Mahesh K. Mishra, “DC capacitor voltage equalization in neutral clamped inverters for DSTATCOM application,” IEEE Trans. on Ind. Electron., vol. 57, no. 8, pp. 2768–2775, Aug. 2010.

[18] Y. Chen, B. Mwinyiwiwa, Z. Wolanski, and B.-T. Ooi, “Regulating and equalizing DC capacitance voltages in multilevel STATCOM,” IEEE Tran. on Power Del., vol. 12, no. 2, pp. 901–907, Apr. 1997.

[19] U. Rao, Mahesh K. Mishra, and A. Ghosh, “Control strategies for load compensation using instantaneous symmetrical component theory under different supply voltages,” IEEE Trans. on Power Del., vol. 23, no. 4, pp. 2310–2317, 2008.

[20] D. M. Brod and D. Novotny, “Current control of VSI-PWM inverters,” IEEE Trans. on Ind. Appl., vol. IA-21, no. 3, pp. 562–570, May 1985.