MATLAB-Simulink Based Tool Development for Early Stage Design of Electric Powertrain during Conversion of Conventional Vehicle into Plug-In Hybrid Electric Vehicle

Majlesi Journal of Electrical Engineering

مقاله 5، دوره 13، شماره 1، خرداد 2019، صفحه 31-36   

نوع مقاله: Review Article

نویسندگان

Pritam Gujarathi^* ؛ Varsha Shah؛ Makarand Lokahnde

Department of Electrical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat-395007.

چکیده

Electric Vehicles (EV) are becoming more popular due to environmental friendly approach. However, due to the dominance of fossil fuel-based conventional vehicle on road, emission reduction is a crucial task. In spite of continuous efforts to keep emission under control with alternative fuels, emissions are not under control. Conversion of Conventional Vehicle (CV) into Plug-In Hybrid Electric Vehicle (PHEV) is a promising solution to keep emissions under control of present vehicles running on the road as per norms. However, performance is limited by the size of an electric powertrain. Size of electric powertrain and its control strategy decided the fuel economy and emissions of vehicle i.e. the right size of the powertrain components is essential to fully exploit the benefits of the hybridization. The trend of electric powertrain design is from driving cycle. This will give better performance at that particular route only. Hence values are misleading for any other route and this design value can’t be generalized. The paper provides driving cycle independent generalized tool for the design of electric drivetrain during conversion of the conventional vehicle into the plug-in hybrid electric vehicle by fundamental force analogy method to get better performance of the vehicle. The MATLAB-Simulink tool is developed to size electric drivetrain parameters. The design parameters can be given as input which will size the electric powertrain i.e. size of motor and battery. In addition, the tool can be used to size battery of new PHEV. The results obtained confirm the effectiveness of proposed tool and compared with designed values of the vehicle. The size of electric powertrain can be utilized as early stage design during conversion of the conventional vehicle into the plug-in hybrid electric vehicle.
 

کلیدواژه‌ها

Electric Powertrain Plug-in Hybrid Electric Vehicle؛ Sizing؛ Software

مراجع

[1] Reza Ghorbani, Eric Bibeau, and Shaahin Filizadeh, On Conversion of Hybrid Electric Vehicles to Plug-In, IEEE Transactions on Vehicular Technology, Vol. 59, No. 4, May 2010, doi: 10.1109/TVT.2010.2041563.

[2] Saiful A. Zulkifli, Nordin Saad, Syaifuddin Mhd, A. Rashid A. Aziz, Development of Split Axle Parallel Hybrid Electric Vehicles with in Wheel-Motor,2012, 4th IEEE International Conference on Intelligent and Advanced Systems (ICIAS2012).

[3] Sudhir Guptea, Experimental Analysis and Feasibility Study of 1400 CC Diesel Engine Car Converted Into Hybrid Electric Vehicle by Using BLDC Hub Motors, 4th International Conference on Advances in Energy Research, 2013, ICAER 2013, Energy Procedia 54 (2014) 177 – 184, doi:10.1016/j. egypro.2014.07.261.

[4] Mushtak Talib AI-Atabil and Tala1 F. Y u d, Experimental Investigation of a Single Cylinder Diesel Engine as A Hybrid Power Unit for a Series Hybrid Electric Vehicle, 2002, IEEE. Student Conference on Research and Development Proceed-ings, Shah Alam, Malaysia.

[5] Steven Jenkins and Mehdi Ferdowsi, HEV to PHEV Conversion Compatibility, IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008, Harbin, China.

[6] Michael L. McIntyre, Maegan Young, Robert Kessigner, On Conversion of Hybrid Electric Vehicles to Plug-In Hybrid Conversion: As a Capstone Project and Research, 2010, IEEE.

[7] Saiful A. Zulkifli, Nordin Saad, Syaifuddin Mhd, A. Rashid A. Aziz, Split-Parallel In Wheel-Motor Retrofit Hybrid Electric Vehicles, IEEE International Power Engineering and Optimization Conference (PEOCO2012), Melaka , Malaysia:6-7 June 2012.

[8] Nisai H. Fuengwarodsakul, Retrofitting a used Car with Hybrid Electric Propulsion System, 2009, IEEE.

[9] G.Rizzo, M.Sorrentino, C.Speltino, I.Arsie, G.Fiengo, F.Vasca, Converting Conventional Cars in Mild Hybrid Solar Vehicles, International Federation of Automatic Control (IFAC)-18th IFAC World Congress Milano (Italy) August 28 - September 2, 2011.

[10] Steven Jenkins and Mehdi Ferdowsi, Urban bus fleet conversion to hybrid fuel cell optimal powertrains, EWGT2013 – 16th Meeting of the EURO Working Group on Transportation, Procedia - Social and Behavioral Sciences 111,2014, 692 – 701, doi: 10.1016/j.sbspro.2014.01.103.

[11] Ehsan Tara, Soheil Shahidinejad, Shaahin Filizadeh, Eric Bibeau, Battery Storage Sizing in a Retrofitted Plug-in Hybrid Electric Vehicle, IEEE Transactions on Vehicular Technology, Vol. 59, NO. 6, July 2010.

[12] Reza Ghorbani, Eric Bibeau, and Shaahin Filizadeh, Influence of Motor Power and Efficiency On fuel Consumption Of Retrofit –Conversion Split Parallel Hybrid Electric Vehicle, 2013, IEEE.

[13] Frank Zeman, Randall Lewis, Retrofitted plug-in hybrid vehicles: Results of NYIT drive share program, Transportation Research Part D 17, 2012, pp 514–518.

[14] Sanjaka G. Wirasingha, Nigel Schofield,Ali Emadi, Feasibility analysis of converting a Chicago Transit Authority (CTA) transit bus to a plug-in hybrid electric vehicle, IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008, Harbin, China.

[15] Sunarto Kaleg, Abdul Hapid , M. Redho Kurnia , Electric vehicle conversion based on distance, speed and cost requirements, 2nd International Conference on Sustainable Energy Engineering and Application, ICSEEA 2014, Energy Procedia 68 (2015) 446 – 454, doi: 10.1016/j.egypro.2015.03.276.

[16] Gujarathi P. K., Varsha A. Shah and Makarand M. Lokhande, Design, Modeling, Simulation and Analysis for Conversion of Conventional Tata Indica Car into Plug in Hybrid Electric Vehicle, The 28th International Electric Vehicle Symposium and Exhibition(EVS28), KINTEX, Korea, May 3-6, 2015.

[17] https://www.cardekho.com/toyota/toyota-innova-specifications.htm, (accessed on 02/03/2018).

[18] https://www.ford.com/cars/fusion/models/fusion-hybrid-se/?gnav=vhpnav, (accessed on 02/03/2018).

[19] https://www.caranddriver.com/reviews/2017-ford-fusion-energi-tested-review, (accessed on 02/03/2018).

[20] https://en.wikipedia.org/wiki/Cadillac_ELR, (accessed on 02/03/2018).

[21] http://www.hybridcars.com/how-gm-amped-up-the-2016-cadillac-elr/, (accessed on 03/03/2018).

[22] http://www.mahindraelectric.com/e2oPlus/(accessed on 03/03/2018).

[23] http://www.team-bhp.com/forum/official-new-car-reviews/134857-mahindra-reva-e2o-official-review.html (accessed on 03/03/2018).