Design and Development of High-Precision Hybrid Controller for Ultra-Precision Non-Conventional Single-Point Diamond Turning Processes

Majlesi Journal of Electrical Engineering

مقاله 11، دوره 14، شماره 2، شهریور 2020، صفحه 61-70   

نوع مقاله: Review Article

نویسندگان

Shahrokh Hatefi^* ؛ Khaled Abou-El-Hossein

Precision Engineering Laboratory, Nelson Mandela University, Port Elizabeth, South Africa.

چکیده

Ultra-High precision Single-Point Diamond Turning (SPDT) is a widely used machining technology for generation components with optical grade surfaces. SPDT has been widely used in different industry sectors including aerospace, biomedical, military, defense, electronics, and entertainment. By using SPDT, manufacturing of optical surfaces with roughness down to one nanometer, even less than one nanometer, is possible. Recently, the application of non-conventional SPDT techniques during SPDT for improving the outcome of the process has been emerging. Non-conventional machining techniques have been developed and used during SPDT for assisting the process from different capacities. It has been revealed that by using a sole or a combination of non-conventional techniques during SPDT, superior results in terms of optical surface roughness and surface profile accuracy could be obtained. However, non-conventional SPDT technologies are novel solutions and more research need to be undertaken in terms of optimizing these processes and improving their performance. In this study, a novel high-precision hybrid controller is designed and developed for using in non-conventional SPDT processes. The proposed hybrid controlled has the capability of automatically and precisely control different non-conventional machining techniques during the diamond turning process. This controller could be used in a hybrid SPDT platform for controlling implemented machining techniques and synchronizing them. In addition, this hybrid controller could connect to on-machine metrology devices for in-process data acquisition, analyzing process parameters, and determining machining conditions. Thus, in-process tuning of the working parameters is possible. Results of simulations and experimental study have shown the functionality of the developed controller with sufficient precision to be used in such ultra-precision non-conventional SPDT processes.

کلیدواژه‌ها

Ultra-Precision Machining؛ Hybrid Machining؛ Non-Conventional Machining؛ Single-Point Diamond Turning؛ Control System, Hybrid Controller

مراجع

1. Hatefi, S. and K. Abou-El-Hossein, Review of single-point diamond turning process in terms of ultra-precision optical surface roughness. The International Journal of Advanced Manufacturing Technology, 2020. 106(5): p. 2167-2187.

2. Abdulkadir, L.N., et al., Review of molecular dynamics/experimental study of diamond-silicon behavior in nanoscale machining. The International Journal of Advanced Manufacturing Technology, 2018. 98(1-4): p. 317-371.

3. Mishra, V., et al., Ultra-precision Diamond Turning Process, in Micro and Nano Machining of Engineering Materials. 2019, Springer. p. 65-97.

4. Ming, W., et al., A comprehensive review of theory and technology of glass molding process. The International Journal of Advanced Manufacturing Technology, 2020: p. 1-36.

5. Zhang, S., et al., A review of fly cutting applied to surface generation in ultra-precision machining. International Journal of machine tools and manufacture, 2016. 103: p. 13-27.

6. Zhang, S., et al., A review of surface roughness generation in ultra-precision machining. International Journal of Machine Tools and Manufacture, 2015. 91: p. 76-95.

7. Sharma, V., M. Dogra, and N. Suri, Advances in the turning process for productivity improvement—a review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008. 222(11): p. 1417-1442.

8. Short, M. and K. Burn, A generic controller architecture for intelligent robotic systems. Robotics and Computer-Integrated Manufacturing, 2011. 27(2): p. 292-305.

9. Chen, Y.-L., et al., Auto-tracking single point diamond cutting on non-planar brittle material substrates by a high-rigidity force controlled fast tool servo. Precision Engineering, 2017. 49: p. 253-261.

10. Ulmer Jr, B.C. and T.R. Kurfess, Integration of an open architecture controller with a diamond turning machine. Mechatronics, 1999. 9(4): p. 349-361.

11. Zhu, W.-L., et al., Modeling and analysis of uncertainty in on-machine form characterization of diamond-machined optical micro-structured surfaces. Measurement Science and Technology, 2016. 27(12): p. 125017.

12. Liu, X., et al., Analysis of surface texturing in radial ultrasonic vibration-assisted turning. Journal of Materials Processing Technology, 2019. 267: p. 186-195.

13. Langan, S.M., D. Ravindra, and A.B. Mann, Process parameter effects on residual stress and phase purity after microlaser-assisted machining of silicon. Materials and Manufacturing Processes, 2018. 33(14): p. 1578-1586.

14. Banik, S., et al., Recent trends in laser assisted machining of ceramic materials. Materials Today: Proceedings, 2018. 5(9): p. 18459-18467.

15. Li, Z., et al., Ultrasonically assisted single point diamond turning of optical mold of tungsten carbide. Micromachines, 2018. 9(2): p. 77.

16. Fortunato, A., et al., A laser assisted hybrid process chain for high removal rate machining of sintered silicon nitride. CIRP Annals, 2015. 64(1): p. 189-192.

17. Bhowmik, S. and D. Zindani, Combined Variant of Hybrid Micromachining Processes, in Hybrid Micro-Machining Processes. 2019, Springer. p. 61-70.

18. Bhowmik, S. and D. Zindani, Overview of Hybrid Micro-manufacturing Processes, in Hybrid Micro-Machining Processes. 2019, Springer. p. 1-12.

19. Luo, X. and Y. Qin, Hybrid machining : theory, methods, and case studies. 2018, London [etc.]: Academic Press.

20. Chavoshi, S.Z. and X. Luo, Hybrid micro-machining processes: A review. Precision Engineering, 2015. 41: p. 1-23.

21. Lauwers, B., et al., Hybrid processes in manufacturing. CIRP Annals, 2014. 63(2): p. 561-583.

22. Dandekar, C.R., Y.C. Shin, and J. Barnes, Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining. International Journal of Machine Tools and Manufacture, 2010. 50(2): p. 174-182.

23. Li, D., et al., Kinematics error compensation for a surface measurement probe on an ultra-precision turning machine. Micromachines, 2018. 9(7): p. 334.

24. Li, D., et al., Ultraprecision machining of microlens arrays with integrated on-machine surface metrology. Optics express, 2019. 27(1): p. 212-224.

25. Moretti, M., et al., Assessment of surface topography modifications through feature-based registration of areal topography data. Surface Topography: Metrology and Properties, 2019. 7(2): p. 025003.

26. Gao, W., et al., On-machine and in-process surface metrology for precision manufacturing. Ann. CIRP, 2019. 68.

27. Troutman, J.R., et al., Machining and metrology of a chalcogenide glass freeform lens pair. Procedia Manufacturing, 2016. 5: p. 669-683.

28. Bono, M.J. and R.L. Hibbard, Fabrication and metrology of micro-scale sinusoidal surfaces in polymer workpiece materials. 2004, Lawrence Livermore National Lab.(LLNL), Livermore, CA (United States).

29. Balasubramaniam, R., R.V. Sarepaka, and S. Subbiah, Diamond turn machining: Theory and practice. 2017: CRC Press.

30. Zhu, L., et al., Review on fast tool servo machining of optical freeform surfaces. The International Journal of Advanced Manufacturing Technology, 2018. 95(5-8): p. 2071-2092.

31. Kumar, J., Ultrasonic machining—a comprehensive review. Machining Science and Technology, 2013. 17(3): p. 325-379.

32. Singh, R. and J. Khamba, Ultrasonic machining of titanium and its alloys: A review. Journal of Materials Processing Technology, 2006. 173(2): p. 125-135.

33. Liu, Y., et al., Experimental Investigation on Form Error for Slow Tool Servo Diamond Turning of Micro Lens Arrays on the Roller Mold. Materials, 2018. 11(10): p. 1816.

34. Venkatesan, K., R. Ramanujam, and P. Kuppan, Laser assisted machining of difficult to cut materials: research opportunities and future directions-a comprehensive review. Procedia Engineering, 2014. 97: p. 1626-1636.

35. Samant, A.N. and N.B. Dahotre, Laser machining of structural ceramics—a review. Journal of the European ceramic society, 2009. 29(6): p. 969-993.

36. Sofuoğlu, M.A., et al., Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning. The International Journal of Advanced Manufacturing Technology, 2018. 95(1-4): p. 83-97.

37. Huang, S., et al., Diamond-cutting ferrous metals assisted by cold plasma and ultrasonic elliptical vibration. The International Journal of Advanced Manufacturing Technology, 2016. 85(1-4): p. 673-681.

38. Xu, W., et al., Diamond wear properties in cold plasma jet. Diamond and Related Materials, 2014. 48: p. 96-103.

39. Yip, W. and S. To, Effects of magnetic field on microstructures and mechanical properties of titanium alloys in ultra-precision diamond turning. Materials Research Express, 2019. 6(5): p. 056553.

40. Yip, W. and S. To, Reduction of material swelling and recovery of titanium alloys in diamond cutting by magnetic field assistance. Journal of Alloys and Compounds, 2017. 722: p. 525-531.

41. Yip, W. and S. To, Tool life enhancement in dry diamond turning of titanium alloys using an eddy current damping and a magnetic field for sustainable manufacturing. Journal of Cleaner Production, 2017. 168: p. 929-939.

42. Hatefi, S. and K. Abou-El-Hossein, Feasibility Study on Design and Development of a Hybrid Controller for Ultra-Precision Single-Point Diamond Turning. Majlesi Journal of Electrical Engineering, 2019. 13(2): p. 121-128.

43. Hatefi, S., O. Ghahraei, and B. Bahraminejad, Design and Development of a Novel Multi-Axis Automatic Controller for Improving Accuracy in CNC Applications. Majlesi Journal of Electrical Engineering, 2017. 11(1): p. 19.

44. Hatefi, S., et al., Continuous distraction osteogenesis device with MAAC controller for mandibular reconstruction applications. BioMedical Engineering OnLine, 2019. 18(1): p. 43.