Analysis of Free Vibration Sandwich Panels with trapezoidal Corrugated Core Based on Galerkin Method

Analytical and Numerical Methods in Mechanical Design

دوره 1، شماره 2، اسفند 2022، صفحه 71-81   

نویسندگان

Arman Gholamreza BanadCooki^{* 1}؛ J.Rezaei Pazhand²

¹Faculty of Industrial and Mechanical Engineering, Islamic Azad University, Qazvin Branch, Qazvin, Iran

²Faculty of Engineering, Ferdowsi University, Mashhad, Iran

چکیده

The purpose of this paper is to evaluate the free vibration of sandwich panels with corrugated core using the element-free Galerkin method and based on the first-order shear deformation theory (FSDT).The sandwich panels' free vibrations with corrugated core consist of two sheets above and below the panels, and a corrugated core in middle of these panels. The core equals to orthotropic sheet and the two panels equal to isotropic sheet. Dynamic equations of the members are obtained through FSDT. The present research applies Galerkin numerical element less method to solve equations of the problems. This method uses the functions of minimum moving squares. The model is simulated in cosmos software; the results are compared with the results of present papers, and show the accuracy of the method applied in the present paper.

کلیدواژه‌ها

Free vibrations؛ sandwich structures؛ Trapezoidal corrugated core؛ Element-free Galerkin methods

مراجع

1. Rao, "Shear buckling of corrugated composite panels", Composite structures, Vol. 8, No. 3, pp. 207-220, (1987)
2. Heder, "Buckling of sandwich panels with different boundaryconditions—a comparison between FE-analysis and analytical solutions", Composite structures, Vol. 19, No. 4, pp. 313-332, )1991(.
3. L. Ko, R. H. Jackson," Compressive and shear buckling analysis of metalmatrix composite sandwich panels under different thermalenvironments", Composite Structures, Vol. 25, No. 1, pp. 227-239,) 1993(.
4. Yan, B. Yu, B. Han, C. Chen ,Q. Zhang, T. Lu, "Compressive strength andenergy absorption of sandwich panels with aluminium foam-filledcorrugated cores", Composites Science and Technology, Vol. 86, pp.142-148,)2013(.
5. Rahmani, G.H. Rahimi, "Flexural behavior investigation of sandwichstructures with composite skins and corrgaed composite and foam core",M. Sc thesis, Department of Mechanical engineering, TarbiatModares University, Tehran,) 2012(.
6. Zhang, P. Supernak, S. Mueller-Alander, C. H. Wang," Improving thebending strength and energy absorption of corrugated sandwichcomposite structure", Materials & Design, Vol. 52, pp. 767-773, )2013(.
7. Reany, J. L. Grenestedt," Corrugated skin in a foam core sandwich panel",Composite Structures, Vol. 89, No. 3, pp. 345-355, )2009(.
8. Belytschko, Y. Y. Lu, L. Gu," Element-free Galerkin methods",International Journal for Numerical Methods in Engineering, Vol. 37, No. 2,pp. 229-256, )1994(.
9. Dolbow, T. Belytschko, "An introduction to programming the meshlessElement FreeGalerkin method", Archives of Computational Methods inEngineering, Vol. 5, No. 3, pp. 207-241, )1998(.
10. R. Liu, Y. T. Gu, "An Introduction to Meshfree Methods and TheirProgramming": Springer London, Limited, )2005(.
11. Peng LX, LiewKM,KitipornchaiS. "Analysisofstiffened corrugated platesbased ontheFSDTviathemeshfree method".IntJMechSci, vol. 49:pp.364–78,(2007).
12. Liew KM, PengLX, KitipornchaiS. "Nonlinearanalysisofcorrugatedplatesusing aFSDTandameshfreemetod".ComputMethodsApplMechEngvol.196,pp.2358–76,(2007).
13. Liew KM, PengLX, KitipornchaiS."Buckling analysis of corrugated plates using a mesh-free Galerkinmethodbased on the first-order shear deformation theory". ComputMech .vol.38pp.61–75, (2006).
14. Reddy JN. Theoryandanalysisofelasticplates.London: Taylor & Francis(1999).
15. C. He, J. S. Yang, G. X. Mei, and L. X. Peng, "Bending and free vibration analyses of ribbed plates with a hole based on the FSDT meshless method," Engineering Structures, vol. 272, p. 114914, 2022/12/01/ 2022.