Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation

Journal of Modern Processes in Manufacturing and Production

دوره 12، شماره 1، اردیبهشت 2023، صفحه 45-55   

نوع مقاله: Research Paper

نویسندگان

Ali Kazemi؛ Ali Heidari^* ؛ Kamran Amini^* ؛ Farshid Aghadavoudi؛ Mohsen Loh-Mousavi

Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran

چکیده

In this study, the molecular dynamics method is used to simulate the SMAT process in the AZ31 workpiece. Molecular dynamics calculations in LAMMPS software have been used to investigate the effect of size, number, and velocity parameters of carbon steel particles on the mechanical and physical properties of the surface including residual stress, hardness, and surface roughness in AZ31 matrix has been investigated at the atomic scale. The simulation results during the SMAT process show that the residual stress in the AZ31 matrix increases with increasing the diameter of carbon steel particles and the particle velocity in the SMAT process has a significant effect on improving the mechanical properties of the simulated magnesium matrix. The highest residual stress and the largest increase in Vickers hardness in the SMAT process were calculated for the largest colliding particle. The maximum surface temperature of AZ31 decreases after SMAT with the increasing size of carbon steel particles. The results show that the roughness parameter increases with increasing colliding particle size.

کلیدواژه‌ها

Molecular Dynamics Simulation؛ SMAT؛ AZ31؛ Mechanical Properties؛ Particle Size؛ Particle Velocity

مراجع

[1] Benafia, S., Retraint, D., Brou, S. Y., Panicaud, B. and Poussard, J. G. 2018. Influence of surface mechanical attrition treatment on the oxidation behaviour of 316L stainless steel. Corrosion Science. 136: 188-200.

[2] Sun, Y. H., Wang, R. C., Peng, C. Q., Yan, F. E. N. G., and Ming, Y. A. N. G. 2017. Corrosion behavior and surface treatment of superlight Mg–Li alloys. Transactions of Nonferrous Metals Society of China. 27(7): 1455-1475.

[3] Wu, K., Wang, Y. Q. and Zheng, M. Y. 2007. Effects of microarc oxidation surface treatment on the mechanical properties of Mg alloy and Mg matrix composites. Materials Science and Engineering: A. 447(1-2): 227-232.

[4] Xue, W., Wang, C., Li, Y., Deng, Z., Chen, R. and Zhang, T. 2002. Effect of microarc discharge surface treatment on the tensile properties of Al–Cu–Mg alloy. Materials Letters. 56(5): 737-743.

[5] Wu, T. C., Ho, Y. H., Joshi, S. S., Rajamure, R. S. and Dahotre, N. B. 2017. Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material. Lasers in medical science. 32(4): 797-803.

[6] Hou, X., Qin, H., Gao, H., Mankoci, S., Zhang, R., Zhou, X. and Ye, C. 2017. A systematic study of mechanical properties, corrosion behavior and biocompatibility of AZ31B Mg alloy after ultrasonic nanocrystal surface modification. Materials Science and Engineering: C. 78: 1061-1071.

[7] Samiri, A., Khmich, A., Haouas, H., Hassani, A. and Hasnaoui, A. 2020. Structural and mechanical behaviors of Mg-Al metallic glasses investigated by molecular dynamics simulations. Computational Materials Science. 184: 109895.

[8] Yan, S.R., Toghraie, D., Hekmatifar, M., Miansari, M. and Rostami, S. 2020. Molecular dynamics simulation of Water-Copper nanofluid flow in a three-dimensional nanochannel with different types of surface roughness geometry for energy economic management. Journal of Molecular Liquids. 311: 113222.

[9] Song, H. Y., Zuo, X. D., Yin, P., An, M. R. and Li, Y. L. 2018. Effect of amorphous phase on the plastic deformation mechanism of Mg: a molecular dynamics study. Journal of Non-Crystalline Solids. 494: 1-8.

[10]  Yan, S.R., Shirani, N., Zarringhalam, M., Toghraie, D., Nguyen, Q. and Karimipour, A. 2020. Prediction of boiling flow characteristics in rough and smooth microchannels using molecular dynamics simulation: Investigation the effects of boundary wall temperatures. Journal of Molecular Liquids. 306: 112937.

[11] Cheng, J., Hu, X., and Sun, X. 2020. Molecular dynamics study on interface formation and bond strength of impact-welded Mg-steel joints. Computational Materials Science. 185: 10998

[12] Alipour, P., Toghraie, D., Karimipour, A. and Hajian, M. 2019. Molecular dynamics simulation of fluid flow passing through a nanochannel: effects of geometric shape of roughnesses. Journal of Molecular Liquids. 275: 192-203.

[13] Toghraie, D., Hekmatifar, M., Salehipour, Y. and Afrand, M. 2019. Molecular dynamics simulation of Couette and Poiseuille Water-Copper nanofluid flows in rough and smooth nanochannels with different roughness configurations. Chemical Physics. 527: 110505.

[14] Moradi, A., Heidari, A., Amini, K., Aghadavoudi, F. and Abedinzadeh, R. 2022. The Computational Study of Number of Shot Particles and Distance Effects on Residual Stress and Mechanical Behavior of Ti-6Al-4V Alloy after Shot Peening Process: Molecular Dynamics Approach. Journal of Modern Processes in Manufacturing and Production. 11(2): 17-35.

[15] Jolfaei, N.A., Jolfaei, N.A., Hekmatifar, M., Piranfar, A., Toghraie, D., Sabetvand, R. and Rostami, S. 2020. Investigation of thermal properties of DNA structure with precise atomic arrangement via equilibrium and non-equilibrium molecular dynamics approaches. Computer methods and programs in biomedicine. 185: 105169.

[16] Rida, A., Rouhaud, E., Micoulaut, M., Makke, A. and Retraint, D. 2017. Molecular dynamics investigations for surface mechanical attrition treatment. In Proceedings of 13th International conference on Shot Peening. Montreal.

[17]  Zhang, X., Lu, J. and Shi, S. 2011. A computational study of plastic deformation in AISI 304 induced by surface mechanical attrition treatment. Mechanics of Advanced Materials and Structures. 18(8): 572-577.

[18] Xiling, M. A. and Wei, Y. 2003. MD simulation for nanocrystals. Acta Mechanica Sinica. 19(6): 485-507.

[19] Yu, Y., Shen, Y. H., Zhao, G. D. and Zheng, X. L. 2018. A molecular-dynamics study of the tensile deformation and fracture behavior of nanostructured lithium aluminum oxide. EPL (Europhysics Letters). 120(5): 56002.

[20] Moradi, A., Heidari, A., Amini, K., Aghadavoudi, F. and Abedinzadeh, R. 2021. Molecular modeling of Ti-6Al-4V alloy shot peening: the effects of diameter and velocity of shot particles and force field on mechanical properties and residual stress. Modelling and Simulation in Materials Science and Engineering. 29(6): 065001.

[21] Tomczak, J., Pater, Z. and Bulzak, T. 2012. Thermo-Mechanical Analysis of a Lever Preform Forming from Magnesium Alloy AZ31/Termomechaniczna Analiza Kształtowania Przedkuwki Dźwigni Ze Stopu Magnezu AZ31. Archives of Metallurgy and Materials. 57(4): 1211-1218.

[22] Hou, X., Qin, H., Gao, H., Mankoci, S., Zhang, R., Zhou, X. and Ye, C. 2017. A systematic study of mechanical properties, corrosion behavior and biocompatibility of AZ31B Mg alloy after ultrasonic nanocrystal surface modification. Materials Science and Engineering: C. 78: 1061-1071.

[23] Delle Site, L. and Praprotnik, M. 2017. Molecular systems with open boundaries: Theory and simulation. Physics Reports. 693: 1-56.

[24] Aghadavoudi, F. and Golestanian, H. 2022. Investigation of the effect of atomic structure defects on the thermal expansion coefficient of zigzag and armchair carbon nanotubes using molecular dynamics method. Advanced Processes in Materials Engineering. 16(2): 65-74.

[25] Nosé, S. 1984. A molecular dynamics method for simulations in the canonical ensemble. Molecular physics. 52(2): 255-268.

[26] Karplus, M. and Petsko, G. A. 1990. Molecular dynamics simulations in biology. Nature. 347(6294): 631-639.

[27] Mahboob, M. and Islam, M. Z. 2013. Molecular dynamics simulations of defective CNT-polyethylene composite systems. Computational materials science. 79: 223-229.