Enhancement of energy efficiency and sustainability through green building index platinum certification in Malaysian building design

Majlesi Journal of Electrical Engineering

دوره 19، شماره 1، خرداد 2025، صفحه 1-17   

نوع مقاله: Reseach Article

شناسه دیجیتال (DOI): 10.57647/j.mjee.2025.1901.21

نویسندگان

Billy Kee Haan Sia؛ Mohd Aifaa Mohd Ariff^*

University Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia.

چکیده

This paper presents a comprehensive study on enhancing energy efficiency (EE) and sustainability in building design, focusing on implementing the Green Building Index (GBI) Platinum standards for a proposed office development in Malaysia. While international green building standards, such as LEED, BREEAM, and Green Star, offer robust frameworks, they often fail to address Malaysia’s tropical climate challenges. The GBI framework bridges this gap by tailoring its criteria to local environmental, social, and economic conditions. This study emphasizes advanced commissioning processes, renewable energy integration, and sustainable maintenance practices, including calculations of U-values, Overall Thermal Transfer Value (OTTV), Total Building Energy Consumption (TBEC), and Building Energy Intensity (BEI) through simulations and optimizations. Results show significant improvements, including OTTV reduced to 39.48 W/m2, TBEC reduced by over 65%, and BEI decreased by 66% compared to baseline designs. GBI Platinum certification yields higher annual savings and a longer payback period compared to MS1525:2007, with benefits validated through a 4.08-year payback period. This study provides a valuable framework for sustainable building development by addressing Malaysia’s climatic challenges and leveraging innovative EE strategies.

کلیدواژه‌ها

Energy efficiency؛ Building performance modelling؛ Green building index؛ Sustainable design؛ Cost-benefit analysis

مراجع

[1]         International Energy Agency, ‘Energy Technology Perspectives 2020’, Paris, 2020.

[2]         Salvatore Carlucci, Manfred A. Lange, Georgios Artopoulos, Hanan M. Albuflasa, Margarita-Niki Assimakopoulos, Shady Attia, Elie Azar, Erdem Cuce, Ali Hajiah, Isaac A. Meir, Marina Neophytou, Melina Nicolaides, Despina Serghides, Aaron Sprecher, Muhieddin Tawalbeh, Stavroula Thravalou and Ioanna Kyprianou, ‘Characteristics of the Built Environment in the Eastern Mediterranean and Middle East and Related Energy and Climate Policies’, Energy Efficiency, vol. 17, no. 5, p. 52, Jun. 2024, doi: 10.1007/s12053-024-10217-w.

[3]         Green Building Index, ‘GBI Assessment Procedures’. Malaysia: Green Building Index, 2010.

[4]         U.S. Green Building Council, ‘Leadership in Energy and Environmental Design’, U.S. Green Building Council, Washington, DC, pp. 1–25, 2008.

[5]         Ayomikun Solomon Adewumi, Alex Opoku and Zainab Dangana, ‘Sustainability Assessment Frameworks for Delivering Environmental, Social, and Governance (ESG) Targets: A Case of Building Research Establishment Environmental Assessment Method (BREEAM) UK New Construction’, Corporate Social Responsibility and Environmental Management, vol. 31, no. 5, pp. 3779–3791, Sep. 2024, doi: 10.1002/csr.2768.

[6]         Jian Zuo, Stephen Pullen, Raufdeen Rameezdeen, Helen Bennetts, Yuan Wang, Guozhu Mao, Zhihua Zhou, Huibin Du and Huabo Duan, ‘Green Building Evaluation from a Life-cycle Perspective in Australia: A Critical Review’, Renewable and Sustainable Energy Reviews, vol. 70, pp. 358–368, Apr. 2017, doi: 10.1016/j.rser.2016.11.251.

[7]         Kamil M., Deepak T. J. and Shanti. M, ‘Review of Green Building Index GBI in Malaysia’, International Journal of Trend in Scientific Research and Development, no. Special Issue-ICAEIT2017, pp. 18–22, Nov. 2018, doi: 10.31142/ijtsrd19117.

[8]         Erdem Cuce, Pinar Mert Cuce, Emre Alvur, Yusuf Nadir Yilmaz, Shaik Saboor, Ilker Ustabas, Emanoil Linul and Mohammad Asif, ‘Experimental Performance Assessment of a Novel Insulation Plaster as an Energy-Efficient Retrofit Solution for External Walls: A Key Building Material Towards Low/Zero Carbon Buildings’, Case Studies in Thermal Engineering, vol. 49, p. 103350, Sep. 2023, doi: 10.1016/j.csite.2023.103350.

[9]         Pinar Mert Cuce, Emre Alvur, Erdem Cuce, Saad Alshahrani, Chander Prakash, Huseyin Tan and Ilker Ustabas, ‘Unlocking Energy Efficiency: Experimental Investigation of Bamboo Fibre Reinforced Briquettes as a Sustainable Solution with Enhanced Thermal Resistance’, Case Studies in Thermal Engineering, vol. 60, p. 104680, Aug. 2024, doi: 10.1016/j.csite.2024.104680.

[10]       Erdem Cuce, Pinar Mert Cuce, Christopher Wood, Mark Gillott and Saffa Riffat, ‘Experimental Investigation of Internal Aerogel Insulation Towards Low/Zero Carbon Buildings’, Sustainable and Clean Buildings, pp. 1–22, 2024.

[11]       Ayşe Pınar Mert Cüce, Erdem Cüce and Emre Alvur, ‘Internal or External Thermal Superinsulation Towards Low/Zero Carbon Buildings? A Critical Report’, Gazi Journal of Engineering Sciences, vol. 9, no. 3, pp. 435–442, Jan. 2024, doi: 10.30855/gmbd.07050777.

[12]       Venkata Ramana Maduru, Saboor Shaik, Erdem Cuce, Gorantla Kirankumar, Arumugam Chelliah, Asif Afzal and Chinmay Prasad Mohanty, ‘Analysis of Effective Parameters of Building’s Glazing on Energy Savings and Carbon Emission Mitigation Prospective’, International Journal of Ambient Energy, vol. 43, no. 1, pp. 8959–8970, Dec. 2022, doi: 10.1080/01430750.2022.2111348.

[13]       M. Washim Akram, M. Hasannuzaman, Erdem Cuce and Pinar Mert Cuce, ‘Global Technological Advancement and Challenges of Glazed Window, Facade System and Vertical Greenery-based Energy Savings in Buildings: A Comprehensive Review’, Energy and Built Environment, vol. 4, no. 2, pp. 206–226, Apr. 2023, doi: 10.1016/j.enbenv.2021.11.003.

[14]       Chelliah Arumugam, Saboor Shaik, Abin Roy, Karolos J. Kontoleon, Erdem Cuce, Aabid Hussain Shaik, Samarshi Chakraborty, Mamdooh Alwetaishi, Pinar Mert Cuce and Manish Gupta, ‘Analysis of the Benefits of Adopting Roof Sandwich Panels Integrated with PCM Versus PUR to Mitigate Energy Costs and Carbon Dioxide Emissions’, Journal of Energy Storage, vol. 77, p. 109947, Jan. 2024, doi: 10.1016/j.est.2023.109947.

[15]       Lim Jun Wei, M. M. Islam, M. Hasanuzzaman and Erdem Cuce, ‘Energy Consumption, Power Generation, and Performance Analysis of Solar Photovoltaic Module Based Building Roof’, Journal of Building Engineering, vol. 90, p. 109361, Aug. 2024, doi: 10.1016/j.jobe.2024.109361.

[16]       Thomas Reeves, Svetlana Olbina and Raja Issa, ‘Guidelines for Using Building Information Modeling for Energy Analysis of Buildings’, Buildings, vol. 5, no. 4, pp. 1361–1388, Dec. 2015, doi: 10.3390/buildings5041361.

[17]       Majed Alzara, Ahmed M. Yosri, Amer Alruwaili, Erdem Cuce, Sayed M. Eldin and A. Ehab, ‘Dynamo Script and a BIM-Based Process for Measuring Embodied Carbon in Buildings During the Design Phase’, International Journal of Low-Carbon Technologies, vol. 18, pp. 943–955, Feb. 2023, doi: 10.1093/ijlct/ctad053.

[18]       Seongwoo Lee, Joonho Seon, Byungsun Hwang, Soohyun Kim, Youngghyu Sun and Jinyoung Kim, ‘Recent Trends and Issues of Energy Management Systems Using Machine Learning’, Energies, vol. 17, no. 3, p. 624, Jan. 2024, doi: 10.3390/en17030624.

[19]       American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), ‘ASHRAE Standard 202-2018: Commissioning Process for Buildings and Systems’. Atlanta, GA, USA: ASHRAE, 2018.

[20]       Hao Gao, Christian Koch and Yupeng Wu, ‘Building Information Modelling based Building Energy Modelling: A Review’, Applied Energy, vol. 238, pp. 320–343, Mar. 2019, doi: 10.1016/j.apenergy.2019.01.032.

[21]       Na An, Xin Li, Huaqiu Yang, Xiufeng Pang, Guoheng Gao and Ding Ding, ‘From Building Information Modeling to Building Energy Modeling: Optimization Study for Efficient Transformation’, Buildings, vol. 14, no. 8, p. 2444, Aug. 2024, doi: 10.3390/buildings14082444.

[22]       Sami Salama Hussen Hajjaj, Mohamed Thariq Hameed Sultan, Daryl Ian Paliath and Lee Seng Hua, ‘Recent Trends on Organizational Energy Reduction Policies and Best Practices in South-East Asia’, Materials Today: Proceedings, vol. 81, pp. 302–309, 2023, doi: 10.1016/j.matpr.2021.03.195.

[23]       Waraporn Rattanongphisat and Wathanyoo Rordprapat, ‘Strategy for Energy Efficient Buildings in Tropical Climate’, Energy Procedia, vol. 52, pp. 10–17, 2014, doi: 10.1016/j.egypro.2014.07.049.

[24]       Bjarnhedinn Gudlaugsson, Tariq Ahmed, Huda Dawood, Chris Ogwumike and Nashwan Dawood, ‘‘Application of Cost Benefits Analysis for the Implementation of Renewable Energy and Smart Solution Technologies: A Case Study of InteGRIDy Project’’, in The 9th Annual Edition of Sustainable Places (SP 2021), Basel Switzerland: MDPI, Dec. 2021, p. 15. doi: 10.3390/environsciproc2021011015.

[25]       Yixiang Gao, Shuhui Li, Yang Xiao, Weizhen Dong, Michael Fairbank and Bing Lu, ‘An Iterative Optimization and Learning-Based IoT System for Energy Management of Connected Buildings’, IEEE Internet of Things Journal, vol. 9, no. 21, pp. 21246–21259, Nov. 2022, doi: 10.1109/JIOT.2022.3176306.

[26]       S. Kurtz, E. Riley, J. Newmiller, T. Dierauf, A. Kimber, J. McKee, R. Flottemesch and P. Krishnani, ‘Analysis of Photovoltaic System Energy Performance Evaluation Method’. Golden, CO, USA: National Renewable Energy Laboratory (NREL), 2013.

[27]       Keivan Bamdad, Navid Mohammadzadeh, Michael Cholette and Srinath Perera, ‘Model Predictive Control for Energy Optimization of HVAC Systems Using EnergyPlus and ACO Algorithm’, Buildings, vol. 13, no. 12, p. 3084, Dec. 2023, doi: 10.3390/buildings13123084.

[28]       Silvia Maria Zanoli and Crescenzo Pepe, ‘Thermal, Lighting and IAQ Control System for Energy Saving and Comfort Management’, Processes, vol. 11, no. 1, p. 222, Jan. 2023, doi: 10.3390/pr11010222.

[29]       Guanyu Gao, Jie Li and Yonggang Wen, ‘DeepComfort: Energy-Efficient Thermal Comfort Control in Buildings Via Reinforcement Learning’, IEEE Internet of Things Journal, vol. 7, no. 9, pp. 8472–8484, Sep. 2020, doi: 10.1109/JIOT.2020.2992117.

[30]       S. Gunasingh, S. Hackel and X. Zhou, ‘Persistence in Energy Savings from Retrocommissioning Measures’, ASHRAE Journal, vol. 61, no. 12, pp. 12–19, 2019.

[31]       Haibo Feng, Don Rukmal Liyanage, Hirushie Karunathilake, Rehan Sadiq and Kasun Hewage, ‘BIM-based Life Cycle Environmental Performance Assessment of Single-family Houses: Renovation and Reconstruction Strategies for Aging Building Stock in British Columbia’, Journal of Cleaner Production, vol. 250, p. 119543, Mar. 2020, doi: 10.1016/j.jclepro.2019.119543.

[32]       Mingsheng Liu, David E. Claridge and W. D. Turner, ‘Continuous CommissioningSM of Building Energy Systems’, Journal of Solar Energy Engineering, vol. 125, no. 3, pp. 275–281, Aug. 2003, doi: 10.1115/1.1592538.

[33]       Nicole Di Santo, Leidy Guante Henriquez, Giovanni Dotelli and Marco Imperadori, ‘Holistic Approach for Assessing Buildings’ Environmental Impact and User Comfort from Early Design: A Method Combining Life Cycle Assessment, BIM, and Active House Protocol’, Buildings, vol. 13, no. 5, p. 1315, May 2023, doi: 10.3390/buildings13051315.

[34]       Q. A. Al-Gburi and M. A. Mohd Ariff, ‘Dynamic Security Assessment for Power System Under Cyber-Attack’, Journal of Electrical Engineering and Technology, vol. 14, no. 2, 2019, doi: 10.1007/s42835-019-00084-2.

[35]       Jorge de Brito and Ana Silva, ‘Life Cycle Prediction and Maintenance of Buildings’, Buildings, vol. 10, no. 6, p. 112, Jun. 2020, doi: 10.3390/buildings10060112.

[36]       Carlos Herce, Enrico Biele, Chiara Martini, Marcello Salvio and Claudia Toro, ‘Impact of Energy Monitoring and Management Systems on the Implementation and Planning of Energy Performance Improved Actions: An Empirical Analysis Based on Energy Audits in Italy’, Energies, vol. 14, no. 16, p. 4723, Aug. 2021, doi: 10.3390/en14164723.

[37]       Seongwoo Lee, Joonho Seon, Byungsun Hwang, Soohyun Kim, Youngghyu Sun and Jinyoung Kim, ‘Recent Trends and Issues of Energy Management Systems Using Machine Learning’, Energies, vol. 17, no. 3, p. 624, Jan. 2024, doi: 10.3390/en17030624.

[38]       American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), ‘ASHRAE Standard 202-2018: Commissioning Process for Buildings and Systems’. Atlanta, GA, USA: ASHRAE, 2018.

[39]       Ahhyun Song, Yeeun Kim, Sangjun Hwang, Minjae Shin and Sanghyo Lee, ‘A Comprehensive Review of Thermal Transmittance Assessments of Building Envelopes’, Buildings, vol. 14, no. 10, p. 3304, Oct. 2024, doi: 10.3390/buildings14103304.

[40]       W. S. Kristinayanti, I. G. A. I. Mas Pertiwi, I. K. Sudiarta, I. G. M. Oka Aryawan, I. A. P. Sri Wulandika and P. Angga Bujana, ‘‘Evaluation of Overall thermal Transfer Value (OTTV) Calculation in Building Construction’’, in AIP Conference Proceedings, Lhokseumawe, Aceh, Indonesia, 2023, p. 070001. doi: 10.1063/5.0118054.

[41]       Rosaura Castrillón-Mendoza, Javier M. Rey-Hernández, Larry Castrillón-Mendoza and Francisco J. Rey-Martínez, ‘Sustainable Building Tool by Energy Baseline: Case Study’, Applied Sciences, vol. 14, no. 20, p. 9403, Oct. 2024, doi: 10.3390/app14209403.

[42]       Yi Peng, Haojun Shen, Xiaochang Tang, Sizhe Zhang, Jinxiao Zhao, Yuru Liu and Yuming Nie, ‘Energy Consumption Optimization for Heating, Ventilation and Air Conditioning Systems Based on Deep Reinforcement Learning’, IEEE Access, vol. 11, pp. 88265–88277, 2023, doi: 10.1109/ACCESS.2023.3305683.

[43]       Green Building Index, ‘GBI Booklet’. Malaysia: Green Building Index, 2023.

[44]       Department of Standards Malaysia, ‘Malaysia Standard 1252:2007 - Code of Practice for Energy Efficiency and Use of Renewable Energy for Non-Residential Buildings’. Cyberjaya, Malaysia: Department of Standards Malaysia, 2007.