Load Frequency Control in Two Area Power System Using Sliding Mode Control

journal of Artificial Intelligence in Electrical Engineering

مقاله 5، دوره 3، شماره 10، آذر 2014، صفحه 24-36   

نویسنده

Milad Babakhani Qazijahan

چکیده

In this article, the sliding mode control of frequency load control of power systems is studied. The study area
consists of a system of water and heat. First, a mathematical model of the proposed system disturbances is
made and then sliding control mode for frequency load control is provided. By the system simulation and
sliding mode control, it can be shown that the damping of oscillations is well led.

کلیدواژه‌ها

frequency Load control؛ sliding mode control؛ dual zone system

مراجع

[1] Al-Musabi, Naji A. "Design of optimal
variable structure controllers: applications
to power system dynamics". Diss. Master’s
thesis, King Fahd University of Petroleum
and Minerals, Dhahran, Saudi Arabia, 2004.
[2] H. Bevrani, T. Hiyama, Robust
decentralised PI based LFC design for time
delaypower systems, Energy Conversion
and Management 49 (2) (2008) 193–204.
[3] Y. Rebours, D. Kirschen, M. Trotignon, S.
Rossignol, A survey of frequency
andvoltage control ancillary services—Part
I: Technical features, IEEETransactionson
Power Systems 22 (1) (2007) 350–357.
[4] J. Frunt, A. Jokic, W. Kling, J. Myrzik, P.
van den Bosch, Provision of
ancillaryservices for balance management
in autonomous networks, in: Proceedings
ofthe 5th International Conference on
European Electricity Market, EEM
2008,2008, pp. 1–6.
[5] H. Shayeghi, H. Shayanfar, A. Jalili, Load
frequency control strategies: a stateof-theart
survey for the researcher, Energy
Conversion and Management 50(2) (2008)
344–353.
[6] E. Cam, Application of fuzzy logic for load
frequency control of hydro-electricalpower
plants, Energy Conversion and
Management 48 (4) (2007) 1281–1288.
[7] H. Shayeghi, H. Shayanfar, Application of
ANN technique based on _-synthesisto load
frequency control of interconnected power
system, International Journalof Electrical
Power & Energy Systems 28 (7) (2006)
503–511.
[8] Venkat, Aswin N., et al. "Distributed output
feedback MPC for power system
control." Decision and Control, 2006 45th
IEEE Conference on. IEEE, 2006.
[9] S. Velusami, I. Chidambaram,
Decentralized biased dual mode controllers
forload frequency control of interconnected
power systems considering GDBand GRC
non-linearities, Energy Conversion and
Management 48 (5) (2007)1691–1702.
[10] S. Hosseini, A. Etemadi, Adaptive term
neuro-fuzzy inference system
basedautomatic generation control, Electric
Power Systems Research 78 (7)
(2008)1230–1239.
[11] M. Alrifai, Decentralized controllers for
power system load frequency
control,ICGST International Journal on
Journal of Artificial Intelligence in Electrical Engineering, Vol. 3, No. 10, September 2014
36
Automatic Control and System Engineering
5(2) (2005) 1–16.
[12] H. Shayeghi, H. Shayanfar, A. Jalili, Load
frequency control strategies: a stateof-theart
survey for the researcher, Energy
Conversion and Management 50(2) (2008)
344–353.
[13] Vrdoljak, Krešimir, Nedjeljko Perić, and
Ivan Petrović. "Sliding mode based loadfrequency
control in power
systems." Electric Power Systems
Research80.5 (2010): 514-527.
[14] V. Utkin, Sliding Modes in Control
Optimisation, Springer-Verlag, 1992.
[15] K. Vrdoljak, V. Tezak, N. Peric, A sliding
surface design for robust load frequency
control in power systems, in: Proceedings
of the Power Tech 2007, Lausanne,
Switzerland, 2007, pp. 279–284,
http://ewh.ieee.org/conf/ powertech.
[16] S. Spurgeon, Hyperplane design techniques
for discrete-time variable structure control
systems, International Journal on Control
55 (2) (1992) 445–456.
[17] T. Radosevic, K. Vrdoljak, N. Peric,
Optimal sliding mode controller forpower
system’s load-frequency control, in:
Proceedings of the 43rd
InternationalUniversities Power
Engineering Conference, Padova, Italy,
2008,pp. 1–5.
[18] K. Vrdoljak, N. Peric, M. Mehmedovic,
Optimal parameters for sliding modebased
load-frequency control in power systems,
in: Proceedings of the 10thInternational
Workshop on Variable Structure Systems,
Antalya, Turkey, 2008,pp. 331–336