Free Vibration Analysis of Orthotropic FGM Cylinders by a Mesh-Free Method

Journal of Solid Mechanics

مقاله 6، دوره 6، شماره 1، خرداد 2014، صفحه 70-81   

نوع مقاله: Research Paper

نویسندگان

R Moradi-Dastjerdi¹؛ M Foroutan^{* 2}

¹Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University

²Department of Mechanical Engineering, Razi University, Kermanshah

چکیده

In this paper, free vibration analysis of orthotropic functionally graded material (FGM) cylinders was carried out by a Mesh-Free method. In this analysis, moving least squares shape functions are used for approximation of displacement field in the weak form of equilibrium equation. Essential boundary conditions are imposed by transformation method. In this simulation, an axisymmetric model is used. The orthotropic FGM cylinders are assumed to be a mixture of two isotropic materials as fiber and matrix. The volume fraction of the fiber is changed in the radial direction. Consequently, mechanical properties of these cylinders are changed in the radial direction. Free vibration analysis of orthotropic FGM cylinders with any arbitrary combination of boundary conditions is possible by the proposed model. Natural frequencies obtained from the presented model are in good agreement with results of finite element simulation and other results from literature. Effects of various types of boundary conditions, geometrical parameters, and mechanical properties on the natural frequencies are studied.

کلیدواژه‌ها

FGM؛ Orthotropic؛ Mesh-free, Axisymmetric؛ Free vibration

مراجع

[1] Koizumi M., 1993, The concept of FGM, Ceramic Transactions Functionally Graded Materials 34:3-10.
[2] Kashtalyan M., 2004, Three-dimensional elasticity solution for bending of functionally graded rectangular plates, European Journal of Mechanics A–Solid 23:853-864.
[3] Loy C.T., Lam K.Y., Reddy J.N., 1999, Vibration of functionally graded cylindrical shells, International Journal of Mechanical Sciences 41:309-324.
[4] Pradhan S.C., Loy C.T., Reddy J.N., 2000, Vibration characteristics of functionally graded cylindrical shells under various boundary conditions, Applied Acoustics 61:111-129.
[5] Kadoli R., Ganesan K., 2006, Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-speciefied boundary condition, Journal of Sound and Vibrations 289:450-480.
[6] Haddadpour H., Mahmoudkhani S., Navazi H.M., 2007, Free vibration analysis of functionally graded cylindrical shells including thermal effects, Thin-walled structures 45:591-599.
[7] Ansari R., Darvizeh M., 2008, Prediction of dynamic behavior of FGM shells under arbitrary boundary conditions, Composite Structures 85:284-292.
[8] Mollarazi H.R., Foroutan M., Moradi-Dastjerdi R., 2011, Analysis of free vibration of functionally graded material (FGM) cylinders by a meshless method, Journal of Composite Materials 46:507-515.
[9] Leissa A.W., So J., 1995, Accurate vibration frequencies of circular cylinders from three dimensional analysis, Journal of the Acoustical Society of America 98:2136-2141.
[10] Leissa A.W., So J., 1995, Comparisons of vibration frequencies for rods and beams from 1D and 3D analysis, Journal of the Acoustical Society of America 98:2122-2135.
[11] Hutchinson J.R., 1996, Accurate vibration frequencies of circular cylinders from three-dimensional analysis, Journal of the Acoustical Society of America 98:2136-2141.
[12] Hutchinson J.R., 1995, Accurate vibration frequencies of circular cylinders from three-dimensional analysis, Journal of the Acoustical Society of America 100:1894-1895.
[13] Zhou D., Cheung Y.K., Lo S.H., Au F.T.K., 2003, 3D vibration analysis of solid and hollow circular cylinders via Chebyshev–Ritz method, Computer Methods in Applied Mechanics and Engineering 192:1575-1589.
[14] Han X., Liu G.R., Xi Z.C., Lam K.Y., 2001, Transient waves in a functionally graded cylinder, International Journal of Solids and Structures 38:3021-3037.
[15] Shakeri M., Akhlaghi M., Hoseini S.M., 2006, Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder, Composite Structures 76:174-181.
[16] Hosseini S.M., Akhlaghi M., Shakeri M., 2007, Dynamic response and radial wave propagation velocity in thick hollow cylinder made of functionally graded materials, International Journal for Computer-Aided Engineering and Software 24:288-303.
[17] Asgari M., Akhlaghi M., Hosseini S.M., 2009, Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading, Acta Mechanica 208:163-180.
[18] Hosseini S.M., Abolbashari M.H., 2010, General analytical solution for elastic radial wave propagation and dynamic analysis of functionally graded thick hollow cylinders subjected to impact loading, Acta Mechanica 212:1-19.
[19] Shahabian F., Hosseini S.M., 2010, Stochastic dynamic analysis of a functionally graded thick hollow cylinder with uncertain material properties subjected to shock loading, Material & Design 31:894-901.
[20] Zhang G.M., Batra R.C., 2007, Wave propagation in functionally graded materials by modified smoothed particle hydrodynamics (MSPH) method, Journal of Computational Physics 222:374-390.
[21] Foroutan M., Moradi-Dastjerdi R., 2011, Dynamic analysis of functionally graded material cylinders under an impact load by a mesh-free method, Acta Mechanica 219:281-290.
[22] Foroutan M., Moradi-Dastjerdi R., Sotoodeh-Bahreini R., 2012, Static analysis of FGM cylinders by a mesh-free method, Steel and Composite Structures 12:1-11.
[23] Moradi-Dastjerdi R., Foroutan M., Pourasghar A., 2013, Dynamic analysis of functionally graded nanocomposite cylinders reinforced by carbon nanotube by a mesh-free method, Material & Design 44:256-266.
[24] Sladek J., Sladek V., Zhang Ch., 2005, Stress analysis in anisotropic functionally graded materials by the MLPG method, Engineering Analysis with Boundary Elements 29:597-609.
[25] Yas M.H., Garmsiri K., 2010, Three-dimensional free vibration analysis of cylindrical shells with continuous grading reinforcement, Steel and Composite Structures 10:349-360.
[26] Sobhani Aragh B., Yas M.H., 2010, Static and free vibration analyses of continuously graded fiber-reinforced cylindrical shells using generalized power-law distribution, Acta Mechanica 215:155-173.
[27] Sobhani Aragh B., Yas M.H., 2010, Three-dimensional free vibration of functionally graded fiber orientation and volume fraction cylindrical panels, Material & Design 31:4543-4552.
[28] Chen W.Q., Bian Z.G., Ding H.J., 2004, Three-dimensional vibration analysis of fluid-filled orthotropic FGM cylindrical shells, International Journal of Mechanical Sciences 46:159-171.
[29] Lancaster P., Salkauskas K., 1981, Surface generated by moving least squares methods, Mathematics of Computation 37:141-158.
[30] Shen H.S., 2009, A comparison of buckling and post buckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators, Composite Structures 91:375-384.
[31] Vasiliev V.V., Morozov E.V., 2001, Mechanics and Analysis of Composite Materials, Elsevier Science Ltd, First Edition.