Study of the Notching HSS Rolls by CBN Tool using RSM Method

Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

مقاله 10، دوره 9، شماره 2 - شماره پیاپی 26، آبان 2016، صفحه 259-268

نوع مقاله: Persian

نویسندگان

Mohsen Jafari Dinani¹؛ Amin Kolahdooz^{* 2}؛ Seyyed Ali Eftekhari³

¹Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran.

²Assistant Professor, Young Researchers and Elite Club, Islamic Azad University, Khomeinishahr Branch, Isfahan/Khomeinishahr, Iran

³Assistant Vice Chancellor for Research and Information technology Khomeini's Islamic Azad University City

چکیده

One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable. One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable.When the roller is placed on the production line, because of the retained austenite make it very hard. High speed roller used in this study is barely above 70 Shc. Our goal is to obtain the optimum machining parameters that it requires a high number of tests that are practically impossible. So in order to achieve optimal machining parameters with the lowest test, RSM method in Minitab software was used. CBN tools performed well in all tests and succeeded with the best cutting speed 25 m/min, 0.05 mm feed and 0.05 mm depth of cut at the time of 1080 seconds, in notching one caliber.

کلیدواژه‌ها

Hot rolling؛ HSS roler؛ Bar؛ Notching؛ RSM