The Comparison of Martensitic Transformation Sequences Between Aged Ti-50.6 and Ti-51.0 at.% Ni Alloys by in-situ SEM Observations

Journal of Environmental Friendly Materials

مقاله 4، دوره 1، شماره 1، خرداد 2017، صفحه 11-18   

نوع مقاله: Original Article

نویسنده

B. Karbakhsh Ravari

Department of Applied Science for Electronics and Materials, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Kasuga, Fukuoka, Japan.

چکیده

The comparison of martensitic transformation sequences between aged Ti-50.6 and Ti-51.0 at.%Ni alloys  have been investigated by differential scanning calorimetry (DSC) and in-situ scanning electron microscopy (SEM). Ti-50.6 and 51.0 at.% Ni alloys  were selected for evaluation of Ni concentrations. These alloys were heat-treated at 1223 K for 3.6 ks and then aged at 773 K for 3.6 ks. Although the Ti-50.6 and 51 at. % Ni alloys revealed the triple stage transformations during cooling, but the results of in-situ SEM observations showed that the sequence of these transformations was completely different from each other. Although, the distribution and size of Ti₃Ni₄ precipitates observed in various compositions were different from each other, but the heterogeneity in distribution and size of precipitates was a common feature of them. For both of the compositions, martensitic transformation sequences are quantitatively proved by comparing DSC measurements and SEM observations. The calculations show good agreement between DSC cooling curve and SEM observation results.

کلیدواژه‌ها

Ti-Ni alloy؛ Multistage martensitic transformation؛ Ni concentration

مراجع

[1] S.F.¨ahler, U.K. R¨ossler, O. Kastner, J. Eckert, G. Eggeler, H. Emmerich, P. Entel, S. M¨uller, E. Quandt and A. Karsten, Adv. Eng. Mater., 14(2012), 10.

[2] L. Ma˜nosa, A. Planes and M. Acet, J. Mater. Chem. A, 1(2013), 4925.

[3] X. Moya, S. Kar-Narayan and N.D. Mathur, Nature Mater. , 13 (2014), 439.

[4] X. Moya, E. Defay, V. Heine and N.D. Mathur, Nature Phys., 11 (2015), 202.

[5] A. Kitanovski, U. Plaznik, U. Tomc and A. Poredos, Int. J. Refrig., 57(2015), 288.

[6] K. Otsuka, T. Kakeshita, MRS Bull., 27(2002), 91.

[7] T. Saburi In: K. Otsuka, C.M. Wayman, editors. Shape memory materilas, Cambridge   University Press, Cambridge, (1998), 49.

[8] J. Van Humpback, Mater. Sci. Eng. A, 273-275 (1999), 134.

[9] G. Fan, W. Chen, S. Yang, J. Zhu, X. Ren and K. Otsuka, Acta Mater., 52(2004), 4351.

[10] D. Favier, Y. Liu and P.G. Mc Cormick, Scripta Metall. Mater., 28(1993), 669.

[11] M.C. Carroll, Ch. Somsen and G. Eggeler, Scripta Mater., 50(2004), 187.

[12] A. Dlouhy, J. Khalil-Allafi and G. Eggeler, Philos. Mag., 83(2003), 339.

[13] P.C. Su, S.K. Wu, Acta Mater. , 52(2004), 1117.

[14] T. Tadaki, Y. Nakata, K. Shimizu and K. Otsuka, Trans. JIM, 27(1986), 731.

[15] L. Bataillard, J-E Bidaux and R. Gotthardt, philos. Mag. A, 78(1998), 327.

[16] J. Khalil-Allafi, X. Ren and G. Eggeler, Acta Mater. , 50(2002), 793.

[17] J. Khalil-Allafi, A. Dlouhy and G. Eggeler, Acta Mater. , 50(2002), 4255.

[18] M. Nishida, T. Hara, T. Ohba, K.Yamaguchi, K. Tanaka and K. Yamauchi, Mater. Trans., 44 (2003), 2631.

[19] K. Fujishima, M. Nishida, Y. Morizono, K. Yamaguchi, K. Ishiuchi and T. Yamamuro, Mater. Sci. Eng. A, 438-440(2006), 489.

[20] J. Khalil-Allafi, G. Eggeler, A. Dlouhy, W.W. Schmhal and C. Somsen, Mater. Sci. Eng. A, 378 (2004), 148.

[21] G. Fan, Y. Zhu, W. Chen, S. Yang, X. Ren and K. Otsuka, Mater. Sci. Eng. A, 622(2006), 438.

[22] J.I. Kim, Y. Liu and S. Miyazaki, philos. Mag. A, 20(2004), 2083.

[23] G.R. Purdy, J.G. Parr, Trans. Metal. Soc. AIME, 221(1961), 636.

[24] F.E. Wang, W.J. Buheler, S.J. Pickart, J. Appl. Phys., 36(1965), 3232.

[25] J. E. Hanlon, S.R. Butler and R.J. Wasilewski, Trans. Metal. Soc. AIME, 239(1967), 1323.

[26] W. Tang, B. Sundmann, R. Sandstrom and C. Quiu, Acta Mater. , 47(1999), 3457.

[27] J. Khalil-Allafi, A. Dlouhy and G. Eggeler, Acta Mater. , 50(2002), 4255.

[28] J. Frenzel, E.P. George, A. Dlouhy, Ch. Somsen, M.F. X. Wagner and G. Eggeler ,  Acta   Mater. , 58(2010), 3444.

[29] B. Karbakhsh Ravari,N. Kizakibaru and M. Nishida, J. Alloys Compd., 577S (2013), S268.

[30] B. Karbakhsh Ravari,M. Nishida, Philos. Mag., 193(2013), 2279.

[31] S. Cao, M. Nishida and D. Schryvers, Acta Mater. , 59(2011), 1780.

[32] M. Itakura, N. Kuwano, K. Sato and S. Tachibana, J. Electron Microsc., 59 Supple 1(2010), 165.