High Frequency Resistance Welded Finned Tubes Technologies in Heat Recovery Steam Generator Boilers

Journal of Environmental Friendly Materials

مقاله 9، دوره 1، شماره 1، خرداد 2017، صفحه 46-57   

نوع مقاله: Technical Article

نویسنده

M. Sadeghi

MAPNA Boiler & Equipment Engineering & Manufacturing Co. Karaj, Alborz, Iran.

چکیده

In professional industries have taken an interest in being more environmentally friendly, it is important that all adopt a unified standard regarding environmental preservation. In this investigating the increase in demand for electricity in the world a continuous search for new sources of energy, engineering and technology solutions. Heat recovery system generator (HRSG) is obviously a very desirable energy source, since the product is available almost operating cost-free and increases the efficiency of the cycle in which it is placed, either for steam generation or for incremental power generation. Increasing thermal efficiency while reducing energy costs is possible through the use of finned tubes for heat exchangers. Welding contact currents frequency is a variation of resistance welding which uses high-frequency properties of the welded contact surface heating elements to melt temperature, and combinations thereof by pressure. Finned tubes  used a HRSG is the core facility of a combined cycle thermal power plant that recycles thermal energy from a gas turbine and creates high temperature and high pressure gas. This paper presents the technologies of environment friendly industrial fin tube boiler, with particular emphasis on high-frequency resistance welded (HFRW) finned tubes.

کلیدواژه‌ها

Finned tube؛ High-frequency؛ Resistance Welding؛ Heat recovery steam generator

مراجع

[1] F. Casarosa, C. Donatin and A. Franco, Ener., 29(2004), 389.

[2] B.T. Lebele-Alawa, H.T. Hart, S.O.T. Ogaji and S.D. Probert, Appl. Ener., 85(2008), 494.

[3] B.T. Lebele-Alawa, J. Eng. Phys. Thermophys., 83(2010), 991.

[4] B.T. Lebele-Alawa, V. Egwanwo, Int. J. Appl. Sci. Technol., 2(2012), 60.

[5] V. Ganapathy, Power. Eng., (2001), 105.   

[6] V. Eriksen: Heat Recovery Steam Generator Technology, Woodhead Publishing, (2017).

[7] E. Pis’mennyi, G. Polupan, I. Carvajal-Mariscal, F. Sanchez-Silva, I. Pioro: Handbook for Transversely Finned Tube Heat Exchanger Design, (2016).

[8] G. Volpi, M. Penati, G. Silva, S.p.A. Ansaldo Caldaie: Heat Recovery Steam Generators for large combined cycle plants,Power Gen Europe 2005, Milan, (2005).

[9] J. Mitrovic, Heat Exchanger and Condenser Tubes, Tube Types – Materials – Attributes – Machning, Publico Publications, (2004), 33.

[10] J. Richert: Innovative methods of plastic working, Publisher AGH, Cracow, (2010).

[11] A. Pasierb, Non-Ferr. Ore. Met., 10–11(2002), 505.

[12]R. Kocurek, J. Adamiec, Adv. Mater. Sci., 13(2013).

[13] Z. Dziemidowicz, P. Szyszka, I. Krupa, Elec. Het. Voca. Edu., 11(2011), 26.

[14] J. Noordermeer, P. Eng., IAGT Symposium, Training Sessions, BANFF, ALBERTA, (2013).

[15] ASTM A A192 Standard Specification   for Carbon Steel Boiler Tubes for High-Pressure Service, (2015).

[16] ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes, (2015).

[17] ASTM A 1008 Standard Specification   for Carbon and Steel with improved formability, (2015).

[18] ASTM A 240 Standard Specification for heat resisting chromium and chromium-nickel stainless steel strip for pressure vessels, (2015).

[19] ASTM E340-15, Standard Test Method for Macro etching Metals and Alloys, (2015).

[20] ASTM A370-17, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, (2017).

[21] ASTM E384-16, Standard Test Method for Micro indentation Hardness of Materials, (2016).