Enhancing Basic Metal Industry Global Competitiveness Through Total Quality Management, Supply Chain Management & Just- In -Time

Journal of Optimization in Industrial Engineering

مقاله 3، دوره 13، شماره 2 - شماره پیاپی 28، اسفند 2020، صفحه 27-46   

نوع مقاله: Original Manuscript

شناسه دیجیتال (DOI): 10.22094/joie.2019.741.1472

نویسندگان

Alie Wube Wube Dametew^{* 1}؛ Daniel Kitaw²؛ Frank Ebinger³

¹School of mechanical and industrial Engineering, Wollo University Kombolcha institute of Technology

²School of Mechanical and Industrial Engineering, Addis Ababa University Institute of Technology-Ethiopia

³Campus of Technology Technische Hochschule Nürnberg Georg Simon Ohm-Germany

چکیده

The selection and implantation of sufficient and appropriate continuous improvement strategy are the key success factors for improving firm performance and enhancement of competitive advantage on manufacturing industries. As a result special role are given to Continuous improvement programs such as Supply Chain Management (SCM), Six-Sigma, Total Quality Management (TQM), Kaizen, Just-in-Time (JIT) and Total Productive Maintenance (TPM) in a production system, which attain sustainable business environment and competitive advantage. Thus, the aim of the study is to study the challenges and trends of global competitiveness of basic metal industries, investigates the way of integrating continuous improvement tools and then developed an integrated continuous improvement model from TQM, JIT, and SCM to improve the global competitiveness of steel and metal industries. From numerous contentious improvement programs, we have to emphasize integrated SCM, JIT and TQM implementation on basic metal industries to improve competitive performance. Mainly the study was conducted through field observation, questioner, company reports used as primary data and literature review of research articles, books, manuals, magazines, and electronic-sources, which used as secondary data. The survey data is analyzed using descriptive analysis, SPCT (fishbone diagram).The result found that poor supply chain system, workforce, raw material uncertainty, energy fluctuation, outdated technology, manufacturing systems, financial and logistics problems were identified as the obstacles and influence the Ethiopian basic metal industry performance and global competitiveness. Thus, to tackle the problems an integrated continuous improving model was developed to improve the performance and global competitiveness of basic metal industries.

کلیدواژه‌ها

Basic Metal Industry؛ Integrated Continuous improvement Model؛ JIT؛ SCM&TQM؛ Global Competitiveness؛ Ethiopia

مراجع

(WEF), W. E. (2011-2012). [Global Competitiveness report (GCR).

A.Addae-Korankye. (2013). TOTAL QUALITY MANAGEMENT (TQM): A SOURCE OF COMPETITIVE ADVANTAGE. A COMPARATIVE STUDY OF MANUFACTURING AND SERVICE FIRMS IN GHANA. International Journal of Asian Social Science, 3(6), 1293-1305.

Agency(JICA), T. J. (2010). Basic metal and Engineering industry Firm-level Study. Addis Ababa Ethiopia: Un-Published report.

Akbar Javadian Kootanaee1, D. K. (2013). Just-in-Time Manufacturing System:From Introduction to Implement. International Journal of Economics, Business and Finance, 1(2), 07-25.

Alie Wube Dametew, B. B. (2016). Study Supply Chain Integration to basic Metal Industry. lobal Journal of Researches in Engineering:G. In Industrial Engineering, 16(2).

Alie Wube Dametew, D. K. (2017). The Roles of TQM and JIT for Basic Metal Industries Global Competitiveness. Industrial Engineering & Management, 6(2). doi:10.4172/2169-0316.1000213

Alie Wube Dametew, F. E. (2016). Supply Chain Integration for Improving Performance on Manufacturing Industries. Global Journal of Researches in Engineering:J.General Engineering, 16(4). Retrieved 2016

Atkinson, R. D. (2013). COMPETITIVENESS, INNOVATION AND PRODUCTIVITY:CLEARING UP THE CONFUSION. The Information Technology& Innovation Foundation.

Coskun Dalgiç, H. V. (2011). Improvement of Food Safety and Quality by Statistical Process Control (SPC) in Food Processing Systems: A Case Study of Traditional Sucuk (Sausage) Processing. InTech, Available from: http://www.intechopen.com/books.

Dagne Birhanu, D.-I. D. (2009). Small Scale Metalworking Industries Cluster (Case Study on Towns of Oromia Special Zone). Addis Ababa: Un-published work.

Dametew, A. W. (2015). Problems of Solid Waste Management in Small and Medium Enterprises. International Journal of Environmental Monitoring and Analysis, 3(2), 50-66. doi:10.11648/j.ijema.20150302.14

Dametew, A. W. (2016). Design and Analysis of Small Hydro Power for Rural Electrification. Global Journal of Researches in Engineering: F Electrical and Electronics Engineering, 16(6).

Daniel Prajogo an, J. b. (2012). Supply chainintegrationandperformance:Theeffectsoflong-term relationships,informationtechnologyandsharing,andlogisticsintegration. Int. J.ProductionEconomics, 135, 514–522.

Dave, N. (2002). how to compare six-sigma,lean and the theory of constraints. 6.

Effah-Kesse, D. (2017). Implementation Of Lean In The Public Sector: Investigating The Benefits And Drawbacks.(A Case Study of Molde Municipality). Molde University College.

Eshetu, B. (2017). Integrated Model for Continuous Productivity Improvement in Footwear Industry:(A Case of Anbessa Shoe S.C.). AAiT.

Fasika Bete Georgise1, T. K.-D. (2014). Integrating Developing Country Manufacturing Industries into Global Supply Chain. Journal of Industrial Engineering and Management.

Feyissa, R. Z. (2009). Baseline Survey on Competition and Markets in Ethiopia. Addis Ababa.

Fourtunne. (2016 Published on Nov 15,2016 [ Vol 17 ,No 863). Metal and Engineering Industry Underperforms. Published on Nov 15,2016 [ Vol 17 ,No 863.

Gábor Kovács, K. G. (2015). Supply Chain Coordination between Autonomous Agents – A Game Theory Approach. IEEE/ Proceedings of the Federated Conference on Computer Science and Information Systems.

Hasan Balfaqiha, Z. M.-N. (2016). Review of supply chain performance measurement systems. Computers in Industry, 82, 135-150.

Himanshu S. Moharana*, J. M. (2012). Coordination, Collaboration and Integration for Supply Chain Management. International Journal of Interscience Management Review, 2(2).

INTRODUCTION TO JIT: A REVIEW. (2013). International Journal of Latest Research in Science and Technology, 2(6), 97-101.

Jangwoo Lee, K. L. (2015). SUPPLIER PARTNERSHIP STRATEGY AND GLOBAL COMPETITIVENESS:A CASE OF SAMSUNG ELECTRONICS. Eurasian Journal of Business and Management, 3(4), 1-12. doi:10.15604/ejbm.2015.03.04.001

Karani, S. R. (2012). International Journal of Research Studies in Management, 1(1), 59-76.

Kitaw, A. M.-I. (2014). Continuous Improvement in Global Competitiveness Arena,Conceptual framework for integrating JIT in TQM implementation program. School of Mechanical and Industrial Engineering (SMIE).

Kitaw, K. J. (2016). A LITERATURE REVIEW ON GLOBAL OCCUPATIONAL SAFETY AND HEALTH PRACTICE & ACCIDENTS SEVERITY. International Journal for Quality Research, 279–310. doi:10.18421/IJQR10.02-04

Kitaw, Y. Y.-I. (2014). Competitiveness and beyond the production system thought in reference to Ethiopian leather and Leather products industry. School of Mechanical and Industrial Engineering (SMIE).

Kongolo, M. a. (2014). Impact of Total Quality Management (TQM) on Service Delivery in Swaziland’s Sugar Industry. International Journal of Operations and Logistics Management, 3(2), 158-169.

Kumar, Z. Z. (2013). Manufacturing Excellence through JIT Approach. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 2(7).

Kumar1, R., & Kumar2, V. (2012, October Oct 19-20). LEAN MANUFACTURING: ELEMENTS AND ITS BENEFITS FOR MANUFACTURING INDUSTRY. Trends and Advances in Mechanical Engineering,YMCA University of Science & Technology, Faridabad, Haryana.

Lucy Wairmu Kibera1, B. H. (2016). IMPLEMENTATION OF INTERGRATED SUPPLY CHAIN IN MANUFACTURING COMPANIES KENYA:A CASE OF BIDCO OIL REFINERIES. International Journal of Education and Research, 4(3).

Mahdi Salehi, M. A. (2010). Impact Of JIT On Firms‘ Financial Performance Some Iranian Evidence. Global Journal of Management and Business Research, 10(4).

Mankowitz, G. T. (2008). Supply Chain Management in the Swedish Steel. Un-published thesis.

Martin, P. R. (n.d.). A Study on the Factors of Regional Competitiveness. University of Cambridge, Rotterdam.

Matsui, A. C. (n.d.). JIT Practices and Competitive Performance: Empirical Evidence from Japan. Yokohama National University: International Graduate School of Social Sciences.

MIDI. (2015). Basic metal and engineering industry performance report.

Mohan, B. S. (2016). Metals in World Economy Case of Aluminium Industry in India Status & Constraints. Government of India.

MORIC MILOVANOVIC, B., & SISEK, B. &. (2011). JUST IN TIME CONCEPT AS A MEAN FOR ACHIEVING COMPETITIVE ADVANTAGE IN THE VIRTUAL ECONOMY. In B. Katalinic (Ed.). 22. DAAAM International, Vienna, Austria, EU,.

Mousa, A. (2013). Lean, six sigma and lean six sigma Overview. International Journal of Scientific & Engineering Research,, 4(5).

Muilu, J. M. (2013). SUPPLY CHAIN MANAGEMENT PRACTICES AND PERFORMANCE AMONG PUBLIC RESEARCH INSTITUTIONS IN KENYA. NAIROBI: BUSINESS ADMINISTRATION OF THE UNIVERSITY OF NAIROBI.

Muzeyin, M. (2014). ENHANCING THE COMPETITIVENESS OF ETHIOPIAN STEEL MANUFACTURING INDUSTRIES. Addis Ababa: Addis Ababa Univeristy Institute of Technology(AAUiT).

Ochiri, C. O. (2016). Effects of Green Supply Chain Management Practices on Competitiveness of Firms in the Food and Beverage Sector in Kenya. European Journal of Business and Management, 8(14).

Pasutham, A. (2012). Supply chain performance measurement framework. ASTON UNIVERSITY(PhD Thesis.

Png, C. L. (2015). A REVIEW OF LEAN SIX SIGMA AND MALCOLM BALDRIGE. 6.

Richard Reeda, *. D. (2000). Total quality management and sustainablecompetitive advantage. Journal of Quality Management, 5(1), 5-26.

Robert Huggins, H. I. (2013). Regional Competitiveness: Theories and Methodologies for Empirical Analysis. Journal of CENTRUM Cathedra The Business and Economics Research Journal, 6(2), 155-172.

Sher, M. (2016). The Agile Supply Chain Management: What is it and why should you care! A hub of management bloggers featuring university students & professionals. .

Sunilkumar N Chaudhari1, A. J. (2015). JIT Implements in manufacturing industry – A Review. International Journal of Engineering Research and General Science, 3(4).

Talib, F. (2013). An Overview of Total Quality Management: Understanding the Fundamentals in Service Organization. International Journal of Advanced Quality Management, 1(1), 1-20.

Talib, F. R. (2011 a). Total quality management and service quality: an exploratory study of management practices and barriers in service industries. International Journal of Services and Operations Management,, 10(1), 94-118.

Talib, F. R. (2011c). An interpretive structural modeling (ISM) approach for modeling the practices of total quality management in service sector. InternationalJournal of Modeling in Operations Management,, 1(3), 223-250.

Vuppalapati, K. L. (1995). “JIT and TQM: a case for joint implementation”, MCB University Press, International Journal of Operations & Production Management. 15(5), 84-94.

Xiande Zhaoa, B. H. (2011). Journal of Operations Management, 29, 17-32.

Yasin, A. (2014). APPLICATION OF LEAN SIX SIGMA FOR PROCESS IMPROVEMENT: THE CASE OF ETHIOPIAN PAPER AND PULP S.C. Addis Ababa: AAiT.

Yasin, A. (2014). APPLICATION OF LEAN SIX SIGMA FOR PROCESS IMPROVEMENT: THE CASE OF ETHIOPIAN PAPER AND PULP S.C. Addis Abab: AAiT.