Determination of Local Constitutive Properties of Aluminum using Digital Image Correlation: A Comparative Study Between Uniform Stress and Virtual Fields

ADMT Journal

مقاله 8، دوره 12، شماره 1، خرداد 2019، صفحه 67-75   

نوع مقاله: Original Article

نویسندگان

Ali Shahmirzaloo¹؛ Mohammadreza Farahani^{* 2}

¹MSc, School of Mechanical Engineering, College of engineering, University of Tehran, Tehran, Iran

²Associate professor, School of Mechanical Engineering, College of engineering, University of Tehran, Tehran, Iran

چکیده

A proper understanding of material mechanical properties is important in designing and modelling of components. As a part of a study on the structural integrity, the Digital Image Correlation technique was used to obtain the full-field strain distribution during a tensile test of the specimens. The displacement maps were analyzed using Matlab scripts to compute local stress-strain variations. Consequently the local proof stress values were extracted. In this study, the local extraction of the elastic and plastic properties of Al6061 alloy has been carried out using both the uniform stress method and the virtual fields method involving digital image correlation technique. In uniform stress methodology, full range stress–strain curves are obtained using the whole field strain measurement using Digital Image Correlation. The parameters investigated are Young's modulus, Poisson's ratio, yield strength, strain hardening exponent and strength coefficient. Recently, the virtual fields method is gaining a lot of popularity in domain characterization as it is robust, accurate and faster. Young's modulus, Poisson's ratio, yield strength, strength coefficient and strain hardening exponent are the parameters extracted using both uniform stress method and virtual fields method. The parameter variation obtained by both uniform stress method and the virtual fields method compares very well. Due to various advantages associated with virtual fields method, it is generally recommended for material mechanical properties extraction.

کلیدواژه‌ها

Constitutive properties؛ Digital image correlation؛ Strain hardening exponent؛ Strength coefficient introduction؛ Virtual fields method

مراجع

[1]   Peters, W., Ranson, W., “Digital Imaging Techniques in Experimental Stress analysis”, Optical engineering,Vol. 21, No. 3, 1982, pp. 213427-213427.

[2]   Sutton, M., Wolters, W., Peters, W., Ranson, W., and McNeill, S., “Determination of Displacements Using an Improved Digital Correlation Method”, Image and vision computing, Vol. 1, No. 3, 1983, pp. 133-139.

[3]   He, Z., Sutton, M., Ranson, W., and Peters, W., “Two-Dimensional Fluid-Velocity Measurements by Use of Digital-Speckle Correlation Techniques”, experimental mechanics, Vol. 24, No. 2, 1984, pp. 117-121.

[4]   Chu, T., Ranson, W., and Sutton, M. A., “Applications of Digital-Image-Correlation Techniques to Experimental Mechanics”, Experimental mechanics,Vol. 25, No. 3, 1985, pp. 232-244.

[5]   Sutton, M., Mingqi, C., Peters, W., Chao, Y., and McNeill, S., “Application of an Optimized Digital Correlation Method to Planar Deformation Analysis”, Image and Vision Computing, Vol. 4, No. 3, 1986, pp. 143-150.

[6]   Sutton, M. A., McNeill, S. R., Jang, J., and Babai, M., “Effects of Subpixel Image Restoration on Digital Correlation Error Estimates”, Optical Engineering, Vol. 27, No. 10, 1988, pp. 271070-271070.

[7]   Sutton, M., Bruck, H., and McNeill, S., “Determination of Deformations Using Digital Correlation with the Newton-Raphson Method for Partial Differential Corrections”, Exp Mech, Vol. 29, No. 3, 1989, pp. 261-267.

[8]   Sutton, M. A., Chae, T. L., Turner, J. L., and Bruck, H. A., “Development of a Computer Vision Methodology for the Analysis of Surface Deformations in Magnified Imagesˮ, MiCon 90: Advances in Video Technology for Microstructural Control, ASTM International, Philadelphia, 1991.

[9]   Schreier, H. W., Braasch, J. R., and Sutton, M. A., “Systematic Errors in Digital Image Correlation Caused by Intensity Interpolation”, Optical engineering, Vol. 39, No. 11, 2000, pp. 2915-2921.

[10] Schreier, H., Sutton, M., “Effect of Higher Order Displacement Fields on Digital Image Correlation Displacement Component Estimates”, Exp Mech, Vol. 42, No. 3, 2002, pp. 303-311.

[11] Lockwood, W. D., Tomaz, B., and Reynolds, A. P., “Mechanical Response of Friction Stir Welded AA2024: Experiment and Modeling”, Materials Science and Engineering: A, Vol. 323, No. 1, 2002, pp. 348-353.

[12] Lockwood, W., Reynolds, A. P., “Simulation of the Global Response of a Friction Stir Weld Using Local Constitutive Behavior”, Materials Science and Engineering: A, Vol. 339, No. 1, 2003, pp. 35-42.

[13] Lagattu, F., Brillaud, J., and Lafarie-Frenot, M. C., “High Strain Gradient Measurements by Using Digital Image Correlation Technique”, Materials characterization, Vol. 53, No. 1, 2004, pp. 17-28.

[14] Adeeb, S., Horsley, D., Yan, J., Sutton, M. A., and Reynolds, A. P., “Local Stress-Strain Response of an Axial X100 Girth Weld Under Tensile Loading Using Digital Image Correlationˮ, 2006 International Pipeline Conference: American Society of Mechanical Engineers, 2006, pp. 339-348.

[15] Grédiac, M. “Principe Des Travaux Virtuels et Identification”, Comptes rendus de l'Académie des sciences Série 2, Mécanique, Physique, Chimie, Sciences de l'univers, Sciences de la Terre,Vol. 309, No. 1, 1989, pp. 1-5.

[16] Grédiac, M., Toussaint, E., and Pierron, F., “Special Virtual Fields for the Direct Determination of Material Parameters with the Virtual Fields Method. 1–Principle and Definition”, International Journal of Solids and Structures,Vol. 39, No. 10, 2002, pp. 2691-2705.

[17] Grediac, M., Pierron, F., Avril, S., and Toussaint, E., “The Virtual Fields Method for Extracting Constitutive Parameters from Full‐Field Measurements: a Review”, Strain, Vol. 42, No. 4, 2006, pp. 233-253.

[18] Avril, S., Pierron, F., “General Framework for the Identification of Constitutive Parameters from Full-Field Measurements in Linear Elasticity”, International Journal of Solids and Structures, Vol. 44, No. 14, 2007, pp. 4978-5002.

[19] Avril, S., Pierron, F., Yan, J., and Sutton, M. A., “Identification of Viscoplastic Parameters Using DIC and the Virtual Fields Method”, Proceedings of the SEM Conference and Exposition, Springfield, USA, 2007.

[20] Meuwissen, M., Oomens, C., Baaijens, F., Petterson, R., and Janssen, J. D., “Determination of the Elasto-Plastic Properties of Aluminium Using a Mixed Numerical–Experimental Method”, Journal of Materials Processing Technology, Vol. 75, No. 1, 1998, pp. 204-211.

[21] Kajberg, J., Lindkvist, G., “Characterisation of Materials Subjected to Large Strains by Inverse Modelling Based on In-Plane Displacement Fields”, International Journal of Solids and Structures, Vol. 41, No. 13, 2004, pp. 3439-3459.

[22] Kajberg, J., Wikman, B., “Viscoplastic Parameter Estimation by High Strain-Rate Experiments and Inverse Modelling–Speckle Measurements and High-Speed Photography”, International Journal of Solids and Structures,Vol. 44, No. 1, 2007, pp. 145-164.

[23] Schreier, H. W., Sutton, M. A., “Systematic Errors in Digital Image Correlation Due to Undermatched Subset Shape Functions”, Experimental Mechanics, Vol. 42, No. 3, 2002, pp. 303-310.

[24] Bing, P., Hui-Min, X., Bo-Qin, X., and Fu-Long, D., “Performance of Sub-Pixel Registration Algorithms in Digital Image Correlation”, Measurement Science and Technology, Vol. 17, No. 6, 2006, pp. 1615.

[25] Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., and Habraken, A., “Quality Assessment of Speckle Patterns for Digital Image Correlation”, Optics and lasers in Engineering, Vol. 44, No. 11, 2006, pp. 1132-1145.

[26] Yaofeng, S., Pang, J. H., “Study of Optimal Subset Size in Digital Image Correlation of Speckle Pattern Images”, Optics and lasers in engineering, Vol. 45, No. 9, 2007, pp. 967-974.

[27] Pan, B., Xie, H., Wang, Z., Qian, K., and Wang, Z., “Study on Subset Size Selection in Digital Image Correlation for Speckle Patterns”, Optics express, Vol. 16, No. 10, 2008, pp. 7037-7048.

[28] Saranath, K., Sharma, A., and Ramji, M., “Zone Wise Local Characterization of Welds Using Digital Image Correlation Technique”, Optics and Lasers in Engineering, Vol. 63, 2014, pp. 30-42.

[29] Sutton, M., Yan, J., Tiwari, V., Schreier, H., and Orteu, J., “The Effect of Out-of-Plane Motion on 2D and 3D Digital Image Correlation Measurements”, Optics and Lasers in Engineering,Vol. 46, No. 10, 2008, pp. 746-757.

[30] Sutton, M. A., Orteu, J. J., and Schreier, H., “Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applicationsˮ, Springer Science & Business Media, New York, 2009.

[31] Rao, R. V., “Advanced Modeling and Optimization of Manufacturing Processes: International Research and Developmentˮ, Springer Science & Business Media, New York, 2010.

[32] Hu, Z., Xie, H., Lu, J., Wang, H., and Zhu, J., “Error Evaluation Technique for Three-Dimensional Digital Image Correlation”, Applied optics, Vol. 50, No. 33, 2011, pp. 6239-6247.

[33] Reu, P., “A Study of the Influence of Calibration Uncertainty on the Global Uncertainty for Digital Image Correlation Using a Monte Carlo Approach”, Experimental Mechanics, Vol. 53, No. 9, 2013, pp. 1661-1680.

[34] Yang, R. c., “A Regularized Finite-Element Digital Image Correlation for Irregular Displacement Field”, Optics and Lasers in Engineering, Vol. 56, 2014, pp. 67-73.

[35] Zhou, Y., Sun, C., and Chen, J., “Adaptive Subset Offset for Systematic Error Reduction in Incremental Digital Image Correlation”, Optics and Lasers in Engineering, Vol. 55, 2014, pp. 5-11.

[36] Saranath, K., Ramji, M., “Local Zone Wise Elastic and Plastic Properties of Electron Beam Welded Ti–6Al–4V Alloy Using Digital Image Correlation Technique: A Comparative Study Between Uniform Stress and Virtual Fields Method”, Optics and Lasers in Engineering, Vol. 68, 2015, pp. 222-234.

[37] Sutton, M., Yan, J., Avril, S., Pierron, F., and Adeeb, S., “Identification of Heterogeneous Constitutive Parameters in a Welded Specimen: Uniform Stress and Virtual Fields Methods for Material Property Estimation”, Experimental Mechanics, Vol. 48, No. 4, 2008, pp. 451-464.

[38] Nelder, J. A., Mead, R., “A Simplex Method for Function Minimization”, The computer journal, Vol. 7, No. 4, 1965, pp. 308-31