Analysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation

Journal of Solid Mechanics

مقاله 1، دوره 11، شماره 4، اسفند 2019، صفحه 690-706   

نوع مقاله: Research Paper

شناسه دیجیتال (DOI): 10.22034/jsm.2019.668608

نویسندگان

A Ghorbanpour Arani^{* 1}؛ M Emdadi²؛ H Ashrafi²؛ M Mohammadimehr²؛ S Niknejad²؛ A.A Ghorbanpour Arani³؛ A Hosseinpour⁴

¹Institute of Nanoscience & Nanotechnology, University of Kashan, Kashan, Iran -----Department of Solid Mechanics ,Faculty of Mechanical Engineering, University of Kashan, Kashan , Iran

²Department of Solid Mechanics ,Faculty of Mechanical Engineering, University of Kashan, Kashan , Iran

³School of Mechnical Engineering, College of Engineering, University of Tehran, Tehran, Iran

⁴Department of Mechanical Engineering and Engineering Science, University of North Carolina at Charlotte, USA

چکیده

In this article, bending, buckling, and free vibration of viscoelastic sandwich plate with carbon nanotubes reinforced composite facesheets and an isotropic homogeneous core on viscoelastic foundation are presented using a new first order shear deformation theory. According to this theory, the number of unknown’s parameters and governing equations are reduced and also the using of shear correction factor is not necessary because the transverse shear stresses are directly computed from the transverse shear forces by using equilibrium equations. The governing equations obtained using Hamilton’s principle is solved for a rectangular viscoelastic sandwich plate. The effects of the main parameters on the vibration characteristics of the viscoelastic sandwich plates are also elucidated. The results show that the frequency significantly decreases with using foundation and increasing the viscoelastic structural damping coefficient as well as the damping coefficient of materials and foundation.

کلیدواژه‌ها

Viscoelastic sandwich plate؛ Carbon nanotube reinforcement؛ New first order shear deformation theory؛ Bending؛ Buckling؛ Free vibration

مراجع

[1] Vinson J.R., 2001, Sandwich structures, Apply Mechanic 54: 201-214.
[2] Sun C.H., Li F., Cheng H.M., Lu G.Q., 2005, Axial Young’s modulus prediction of single walled carbon nanotube arrays with diameters from nanometer to meter scales, Apply Physics 87:193-201.
[3] Jia J., Zhao J., Xu G., Di J., Yong Z., TaoY., Fang C., Zhang Z., Zhang X., Zheng L., 2011, A comparison of the mechanical properties of fibers spun from different carbon nanotubes, Carbon 49: 1333-1339.
[4] Whitney J., 1972, Stress analysis of thick laminated composite and sandwich plates, Journal of Composite Materials 6: 426-440.
[5] Zenkour A., 2005, A comprehensive analysis of functionally graded sandwich plates: Part 1 - deflection and stresses, International Journal of Solids and Structures 42: 5224-5242.
[6] Ugale V., Singh K., Mishra N., 2013, Comparative study of carbon fabric reinforced and glass fabric reinforced thin sandwich panels under impact and static loading, Composite Materials 49: 99-112.
[7] Thostenson E., Chou T-W., 2002, Aligned multi-walled carbon nanotube-reinforced composites, Processing and Mechanical Characterization, Apply Physics 35: L77.
[8] Zhu P., Lei Z., Liew K., 2012, Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory, Composite Structure 94: 1450-1460.
[9] Mohammadimehr M., Navi B., Arani A., 2014, Biaxial buckling and bending of smart nanocomposite plate reinforced by cnts using extended mixture rule approach, Mechanics of Advanced Composite Structures 1: 17-26.
[10] Arani A., Maghamikia S., Mohammadimehr M., Arefmanesh A., 2011, Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods, Journal of Mechanical Science and Technology 25: 809-820.
[11] Arani A., Jafari G-S., 2015, Nonlinear vibration analysis of laminated composite mindlin micro/nano-plates resting on orthotropic pasternak medium using DQM, Advances in Applied Mathematics and Mechanics 36: 1033-1044.
[12] ZenkourA., Sobhy M., 2010, Thermal buckling of various types of FGM sandwich plates, Composite Structures 93: 93-102.
[13] Sobhy M., 2013, Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions, Composite Structures 99: 76-87.
[14] Thai H-T., Nguyen T-K., Thuc P., Lee J., 2014, Analysis of functionally graded sandwich plates using a new first-order shear deformation theory, European Journal of Mechanics A/Solids 45: 211-225.
[15] Zhang L.W., Lei Z.X., Liew K.M., 2015, An element-free IMLS-Ritz framework for buckling analysis of FG–CNT reinforced composite thick plates resting on Winkler foundations, Engineering Analysis with Boundary Elements 58: 7-17.
[16] Shen H-S., 2009, Nonlinear bending of functionally graded carbon nanotube- reinforced composite plates in thermal environments, Composite Structures 91: 9-19.
[17] Lei Z.X., Liew K.M., Yu J.L., 2013, Large deflection analysis of functionally graded carbon nanotubes reinforced composite plates by the element-free kp-Ritz method, Computer Methods in Applied Mechanics and Engineering 256: 89-99.
[18] Zhang L.W., Lei Z.X., Liew K.M., Yu J.L., 2014, Largedeflection geometrically nonlinear analysis of carbon nanotubes reinforced functionally graded cylindrical panels, Computer Methods in Applied Mechanics and Engineering 273: 1-18.
[19] Lei Z.X., Liew K.M., Yu J.L., 2013, Buckling analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-Ritz method, Composite Structures 98: 160-168.
[20] Lei Z.X., Zhang L.W., Liew K., Yu J.L., 2013, Dynamic stability analysis of carbon nanotubes reinforced functionally graded cylindrical panels using the element- free kp-Ritz method, Composite Structures 113: 328-338.
[21] Srivastava I., Yu Z.Z., Koratkar N.A., 2012, Viscoelastic properties of graphene–polymer composites, Advanced Science, Engineering and Medicine 4: 10-14.
[22] Su Y., Wei H., Gao R., Yang Z., Zhang J., Zhong Z., 2012, Exceptional negative thermal expansion and viscoelastic properties of graphene oxide paper, Carbon 50: 2804-2809.
[23] Pouresmaeeli S., Ghavanloo E., Fazelzadeh S.A., 2013, Vibration analysis of viscoelastic orthotropic nanoplates resting on viscoelastic medium, Composite Structures 96: 405-410.
[24] Natarajana S., Haboussib M., Ganapathic M., 2014, Application of higher-order structural theory to bending and free vibration analysis of sandwich plates with CNT reinforced composite facesheets, Composite Structures 113: 197-207.
[25] Malekzadeh P., Shojaee M., 2013, Buckling analysis of quadrilateral laminated plates with carbon nanotubes reinforced composite layers, Thin-Walled Structures 71: 108-118.
[26] Drozdov A.D., 1998, Viscoelastic Structures: Mechanics of Growth and Aging, San Diego, Academic Press.
[27] Shen H-S., Zhang C-L., 2010, Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates, Materials and Design 31: 3403-3411.
[28] Wang Z-X., Shen H-S., 2012, Nonlinear vibration and bending of sandwich plates with nanotube reinforced composite, Composites Part B: Engineering 43: 411-421.
[29] Ghavanloo E., Fazelzadeh S. A., 2011, Flow-thermoelastic vibration and instability analysis of viscoelastic carbon nanotubes embedded in viscous fluid, Physica E 44: 17-24.