Investigation of Strain Gradient Theory for the Analysis of Free Linear Vibration of Nano Truncated Conical Shell

Journal of Solid Mechanics

مقاله 11، دوره 12، شماره 3، آذر 2020، صفحه 632-648   

نوع مقاله: Research Paper

شناسه دیجیتال (DOI): 10.22034/jsm.2019.1882391.1513

نویسندگان

A.R Sheykhi¹؛ Sh Hosseini Hashemi²؛ A Maghsoudpour^{* 1}؛ Sh Etemadi Haghighi¹

¹Department of Mechanical Engineering , Science and Research Branch, Islamic Azad University, Tehran, Iran

²School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

چکیده

In this paper the nano conical shell model is developed based on modified strain gradient theory. The governing equations of the nano truncated conical shell are derived using the FSDT, and the size parameters through modified strain gradient theory have been taken into account. Hamilton’s principle is used to obtain the governing equations, and the shell’s equations of motion are derived with partial differentials along with the classical and non-classical boundary conditions. Galerkin’s method and the Generalized Differential Quadrature (GDQ) approach are applied to obtain the linear free vibrations of the carbon nano cone (CNC). The CNC is studied with simply supported boundary condition. The results of the new model are compared with those of the classical and couple stress theories, which point to the conclusion that the classical and couple stress models are special cases of modified strain gradient theory. Results also reveal that rigidity of the nano truncated conical shell in the strain gradient theory is greater than that in the modified couple stress and classical theories respectively, which leads to an increase in dimensionless natural frequency ratio. Moreover, the study investigates the effect of the size parameters on nano shell vibration for different lengths and vertex angles.           

کلیدواژه‌ها

GDQ method؛ Galerkin’s method؛ Strain gradient theory؛ Carbon nano cone (CNC

مراجع

[1] Firouz-Abadi R.D., Fotouhi M.M., Haddadpour H., 2011, Free vibration analysis of nano cones using a nonlocal continuum model, Physics Letters A 375(41): 3593-3598.
[2] Firouz Abadi R.D., Fotouhi M.M., Haddadpour H., 2012, Stability analysis of nano cones under external pressure and axial compression using nonlocal shell model, Physica E: Low-Dimensional Systems and Nanostructures 44(9): 1832-1837.
[3] Fotouhi M.M., Firouz-Abadi R.D., Haddadpour H., 2013, Free vibration analysis of nano cones embedded in an elastic medium using a nonlocal continuum shell model, International Journal of Engineering Science 64(1): 14-22.
[4] Tadi Beni Y., Soleimani I., 2015, Free torsional vibration and static analysis of the conical nano-shell based on modified couple stress theory, 3rd International Conference on Nanotechnology of Science and Research Pioneers Institute, Istanbul, Turkey.
[5] Zeighampour H., Tadi Beni Y., Mehralian F., 2015, A shear deformable conical shell formulation in the frame work of couple stress theory, Acta Mechanica 226(8): 2607-2629.
[6] Zeighampour H., Tadi Beni Y., 2014, Analysis of conical shells in the framework of coupled stresses, International Journal of Engineering Science 81: 107-122.
[7] Sofiyev A.H., 2013, The non-linear dynamics of FGM truncated conical shells surrounded by an elastic medium, International Journal of Mechanical Sciences 66: 33-44.
[8] Sofiyev A.H., Kuruoglu N., 2011, Natural frequency of laminated orthotropic shells with different boundary conditions and resting on the Pasternak type elastic foundation, Composites: Part B 42(6): 1562-1570.
[9] Sofiyev A.H., Kuruoglu N., 2014, Non-linear buckling of an FGM truncated conical shell surrounded by an elastic medium, Thin-Walled Structures 80: 178-191.
[10] Sofiyev A.H., 2014, Large-amplitude vibration of non-homogenous orthotropic composite truncated conical shells, Composites Part B: Engineering 61: 365-374.
[11] Mehri M., Asadi H., Wang Q., 2016, Buckling and vibration analysis of a pressurized CNT reinforced functionally graded truncated conical shell under an axial compression using HDQ method , Computer Methods in Applied Mechanics and Engineering 303: 75-100.
[12] Ansari R., Rouhi H., Rad A.N., 2014, Vibrational analysis of carbon nanocones under different boundary conditions:an analytical approach, Mechanics Research Communications 56: 130-135.
[13] Kamarian S., Salim M., Dimitri R., Tornabene F., 2016, Free vibration analysis of conical shells reinforced with agglomerated carbon nanotubes, International Journal of Mechanical Sciences 108-109: 157-165.
[14] Sofiyev A.H., 2012, Large-amplitude vibration of non-homogenous orthotropic composite truncated conical shells, Composites Part B: Engineering 94(7): 2237-2245.
[15] Tohidi H. , Hosseini-Hashemi S.H., Maghsoudpour A., Etemadi S., 2017, Strain gradient theory for vibration analysis of embedded CNT-reinforced micro Mindlin cylindrical shells considering agglomeration effects, Structural Engineering and Mechanics 62(5):551-565.
[16] Zeighampour H., Tadi Beni Y., 2014, Cylindrical thin-shell model based on modified strain gradient theory, International Journal of Engineering Science 78: 27-47.
[17] Tadi Beni Y., Mehralian F., Razavi H., 2014, Free vibration analysis of size-dependent shear deformable functionally graded cylindrical shell on the basis of modified couple stress theory, Composite Structures 111: 349-353.
[18] Gholami R., Darvizeh A., Ansari R., Sadeghi F., 2016, Vibration and buckling of first-order shear deformable circular cylindrical micro-/nano-shells based on Mindlinʼs strain gradient elasticity theory, European Journal of Mechanics A/Solids 58: 76-88.
[19] Zhang B., He Y., Liu D., Shen L., Lei J., 2015, Free vibration analysis of four-unknown shear deformable functionally graded cylindrical micro shells based on the strain gradient elasticity theory, Composite Structures 119: 578-597.
[20] Bakhtiari M., Lakis A., Kerboua Y., 2018, Nonlinear vibration of truncated conical shells: Donnell, sanders and nemeth theories, Rapport Technique n°EPM-RT 01.
[21] Tohidi H., Hosseini-Hashemi Sh., Maghsoudpour A., Etemadi Haghighi Sh., 2017, Dynamic stability of FG-CNT-reinforced viscoelastic micro cylindrical shells resting on nonhomogeneous orthotropic viscoelastic medium subjected to harmonic temperature distribution and 2D magnetic field, Wind and Structures 25(2): 131-156.
[22] Ghadiri M., Shafiei N., 2015, Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen’s theory using differential quadrature method, Microsystem Technologies 22(12): 2853-2867.
[23] Malekzadeh P., Golbahar Haghighi M.R., Shojaee M., 2014, Nonlinear free vibration of skew nano plates with surface and small scale effects, Thin-Walled Structures 78: 48-56.
[24] Lam D.C.C., Yang F., Chong A.C.M., Wang J., Tong P., 2003, Experiments and theory in strain gradient elasticity, Journal of the Mechanics and Physics of Solids 51(8): 1477-1508.
[25] Reddy J.N., 2002, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, Boca Raton, USA.