Fabrication of Gelatin-based natural nanocomposite films using nanoclay and Chitosan for food packaging applications

International Journal of Nano Dimension

مقاله 4، دوره 12، شماره 4، دی 2021، صفحه 343-354   

نوع مقاله: Reasearch Paper

شناسه دیجیتال (DOI): 10.22034/ijnd.2021.682460

نویسندگان

Seyed Mohammad Reza Moosavi؛ Mohammad Mahdi Zerafat^*

Nano-chemical Engineering Department, Faculty of Advanced Technologies, Shiraz University, Shiraz, Iran.

چکیده

Solid waste disposal and accumulation from various packaging materials made of synthetic polymers have led to intensified environmental concerns during the last decades. However, extensive research has been conducted on bio-nanocomposites as an alternative material for synthetic polymers in packaging applications during recent years. In this study, gelatin-based films modified with nano-caly and chitosan are proposed for food packaging. Nano-clay is used to improve various features such as mechanical strength and water vapor barrier properties. Also, chitosan is added to the gelatin matrix for anti-microbial and anti-fungal properties. The as-prepared nanocomposite films were characterized using FTIR, XRD and SEM techniques. Also, tensile strength, transparency, swelling behavior, water contact angle and permeability tests were performed. Based on the results, increasing nano-clay up to 5 wt. %, results in 25% tensile strength enhancement in the nano-composite film. Higher nano-clay contents led to strength decline. Elongation at break is reduced by increasing the nano-clay content from 25% to 40%. The contact angle was also reduced by increasing the nano-clay content from 95^o to 90^o showing a small hydrophobicity reduction.

کلیدواژه‌ها

Bio-degradability؛ Chitosan؛ Gelatin؛ Nano-clay؛ Nanocomposite Film؛ Packaging

مراجع

[1] Popovic S. Z., Lazic V. L., Hromiš N. M., Šuput D. Z., Bulut S. N., (2018), Biopolymer packaging materials for food shelf-life prolongation. In Biopolymers for Food Design, Chapter 8; Grumezescu, A.M., Holban, A.M., Eds.; AcademicPress: New York, NY, USA, 223–277.

[2] Silvestre C., Duraccio D., Cimmino S., (2011), Food packaging based on polymer nanomaterials. Prog. Polym. Sci. 36: 1766–1782.

[3] The New Plastics Economy: Rethinking the future of plastics (2016), World economic forum.

[4] Medina-Jaramillo C., Ochoa-Yepes O., Bernal C., Famá L., (2017), Active and smart biodegradable packaging based on starch and natural extracts. Carbohyd. Polym. 176: 187–194.

[5] Stark N. M., (2016), Opportunities for cellulose nanomaterials in packaging films: A review and future trends. J. Renew. Mater. 4: 313-326.

[6] Syahida N., Fitry I., Zuriyati A., Hanani N., (2020), Effects of palm wax on the physical, mechanical and water barrier properties of fish gelatin films for food packaging application. Food Packag. Shelf Life. 23: 100437-100442.

[7] Yang W., Owczarek J. S., Fortunati E., Kozanecki M., Mazzaglia A., Balestra G. M., Kenny J. M., Torre L., Puglia D., (2016), Antioxidant and antibacterial lignin nanoparticles in polyvinylalcohol/chitosan films for active packaging. Indust. Crops Prod. 94: 800–811.

[8] Kumar S., Boro J. C., Ray D., Mukherjee A., Dutta J., (2019), Bio-nanocomposite films of agar incorporated with ZnO nanoparticles as an active packaging material for shelf life extension of green grape. Heliyon. 5: e01867.

[9] Luchian-Lupu A., Zaharescu T., Lungulescu E., Râpă M., Iovu H., (2020), Availability of PLA/SIS blends for packaging and medical applications. Radiation Phys. Chem. 172: 108696-108701.

[10] Benhacine F., Ouargli A., Hadj-Hamou A. S., (2019), Preparation and characterization of novel food packaging materials based on biodegradable PCL/Ag-kaolinite nanocomposites with controlled release properties. Polymer-Plastics Tech. Mater. 58: 328-340.

[11] Fabra M. J., López-Rubio A., Ambrosio-Martín J., Lagaron J. M., (2016), Improving the barrier properties of thermoplastic corn starch-based films containing bacterial cellulose nano-whiskers by means of PHA electro-spun coatings of interest in food packaging. Food Hydrocol. 61: 261-268.

[12] Noorbakhsh-Soltani M., Zerafat M. M., Sabbaghi S., (2018), A Comparative study of gelatin and starch-based natural nanocomposite films modified by nano-cellulose and chitosan for food packaging applications. J. Carbohyd. Polym. 189: 48-55.

[13] Bae H. J., Park H. J., Hong S. I., Byun Y. J., Darby D. O., Kimmel R. M., Whiteside W. S., (2009), Effect of clay content, homogenization RPM, pH, and ultra-sonication on mechanical and barrier properties of fish gelatin/montmorillonite nanocomposite films. LWT - Food Sci. Tech. 42: 1179–1186.

[14] Mao J., Kondu S., Ji H. F., McShane M. J., (2006), Study of the near-neutral pH-Sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection. Biotech. Bioeng. 95: 333-341.

[15] Jayakumar R., Nwe N., Tokura S., Tamura H., (2007), Sulfated chitin and chitosan as novel biomaterials. Int. J. Biolog. Macromol. 40: 175-181.

[16] Rinaudo M., (2008), Main properties and current applications of some polysaccharides as biomaterials. Polymer Int. 57: 397-430.

[17] Appendini P., Hotchkiss J. H., (2002), Review of antimicrobial food packaging. Innov. Food Sci. Emerg. Tech. 3: 113-126.

[18] Bandyopadhyay J., Ray S. S., (2019), Are nanoclay-containing polymer composites safe for food packaging applications? An overview. J. Appl. Polym. Sci. 136: 47214-47219.

[19] Samandari S. S., (2014), Elastic modulus measurement of polymer matrix nano-composites reinforced by platelet nano-clays. Int. J.Nano Dimens. 5: 273-278.

[20] Heidarbeigi J., Borghei A. M., Afshari H., (2019), The mechanical and thermal properties of PE/CNC nanocomposite. Int. J. Nano Dimens. 10: 209-216.

[21] Kuorwel K. K., Cran M. J., Orbell J. D., Buddhadasa S., Bigger S. W., (2015), Review of mechanical properties, migration, and potential applications in active food packaging systems containing nano-clays and nano-silver. Compr. Rev. Food Sci. Food Saf. 14: 411-430.

[22] Alidadykhah M., Peyman H., Roshanfekr H., (2021), Application of a new polymer AgCl nanoparticles coated polyethylene terephetalat [PET] as adsorbent for removal and electrochemical determination of methylene blue dye. Chem. Methodol. 5: 96-106.

[23] Abdia R., Ghorbani-HasanSaraeia A., Naghizadeh Raeisia Sh., Karimi F., (2020), A gallic acid food electrochemical sensor based on amplification of paste electrode by Cdo/CNTs nanocomposite and ionic liquid. J. Med. Chem. Sci. 3: 338-344.

[24] Choudalakis G., Gotsis A., (2009), Permeability of polymer/clay nanocomposites: A review. Eur. Polym. J. 45: 967-984.

[25] Foorginezhad S., Zerafat M. M., (2019), Preparation of low cost ceramic membranes using persian natural clay and application for dye clarification. Desal. Water Treat. 145: 378-392.

[26] Foorginezhad S., Zerafat M. M., (2017), Microfiltration of cationic dyes using nano-clay membranes. Ceram. Int. 43: 15146-15159.

[27] Asadi F., Zerafat M. M., (2016), Adsorption of toluene from aqueous solutions using clay-based nanostructures. Sep. Sci. Tech. 51: 569-574.

[28] Saadat F., Zerafat M. M., Foorginezhad S., (2020), Adsorption of copper ions from aqueous media using montmorillonite-Al₂O₃ nano-adsorbent incorporated with Fe₃O₄ for facile separation. Korean J. Chem. Eng. 37: 2273-2286.

[29] Tang X. Z., Kumar P., Alavi S., Sandeep K. P., (2012), Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials. Crit. Rev. Food Sci. Nutrition. 52: 426-442.

[30] Mu Ch., Li X., Zhao Y., Zhang H., Wang L., Li D., (2012), Freezing/Thawing effects on the exfoliation of montmorillonite in gelatin-based bio-nanocomposite. J. Appl. Polym. Sci. 128: 3141-348.

[31] Rao Y. Q., (2007), Gelatin-clay nanocomposites of improved properties. Polymer. 48: 5369-5375.

[32] Flaker Ch. H. C., Lourenço R. V., Bittante A. M. Q. B., Sobral P. J. A., (2015), Gelatin-based nanocomposite films: A study on montmorillonite dispersion methods and concentration. J. Food Eng. 167: 65–70.

[33] Abdollahi M., Rezaei M., Farzi Gh., (2012), A novel active bio-nanocomposite film incorporating rosemary essential oil and nano-clay into chitosan. J. Food Eng. 111: 343–350.

[34] Giannakas A., Grigoriadi K., Leontiou A., Barkoula N. M., Ladavos A., (2014), Preparation, characterization, mechanical and barrier properties investigation of chitosan–clay nanocomposites. Carbohyd. Polym. 108: 103–111.

[35] Collins L. M., Dziak J. J.,  Li R., (2009), Design of experiments with multiple independent variables: a resource management perspective on complete and reduced factorial designs. Psychol. Methods. 14: 202-24.

[36] Müller C. M., Laurindo J. B., Yamashita F., (2011), Effect of nano-clay incorporation method on mechanical and water vapor barrier properties of starch-based films. Ind. Crops Prod. 33: 605-610.

[37] Esteghlal S., Niakosari M., Hosseini M. H., Mesbahi Gh. R., Yousefi Gh. H., (2016), Gelatin-hydroxy-propyl methylcellulose water-in-water emulsions as a new bio-based packaging material. Int. J. Biol. Macromol. 86: 242–249.

[38] Adikary S., Ashokcline M., Nirojan K., (2015), Characterization of montmorillonite clay from naturally occurring clay deposits in Murunkan Area. Proceedings of 8^th International Research Conference, KDU.

[39] Chen G., Chen Sh., Qi Z., (2001), FTIR spectra, thermal properties and dispersibility of a polystyrene/montmorillonite nanocomposite. Macromol. Chem. Phys. 202: 1189-1193.

[40] Zheng J. P.,  Wang Ch. Z., Wang X. X., Wang H. Y., Zhuang H., Yao K. D., (2007), Preparation of biomimetic three-dimensional gelatin/ montmorillonite–chitosan scaffold for tissue engineering. React. Funct. Polym. 67: 780-788.

[41] Pereda M., Ponce A. G., Marcovich N. E., Ruseckaite R. A., Martucci J. F., (2011), Chitosan-gelatin composites and bi-layer films with potential antimicrobial activity. Food Hydrocol. 25: 1372-1381.

[42] Rubilar J. F., Zúñiga R. N., Osorio F., Pedreschi F., (2015), Physical properties of emulsion-based hydroxyl-propyl methylcellulose/whey protein isolate (HPMC/WPI) edible films. Carbohyd. Polym. 123: 27-38.

[43] Kanmani P., Rhim J. W., (2014), Physicochemical properties of gelatin/silver nanoparticle antimicrobial composite films. Food Chem. 148: 162–169.

[44] Farahnaky A., Dadfar M. M., Shahbazi M., (2014), Physical and mechanical properties of gelatin–clay nanocomposite. J. Food Eng. 122: 78–83.

[45] Zheng J. P., Li P., Ma Y. L., Yao K. D., (2002), Gelatin/montmorillonite hybrid nanocomposite. I. Preparation and Properties. J. Appl. Polym. Sci. 86: 1189–1194.

[46] Martucci J. F., Vázquez A., Ruseckaite R. A., (2007), Nanocomposites based on gelatin and Montmorillonite, morphological and thermal studies. J. Therm. Anal. Calorim. 89: 117–122.

[47] Leceta I., Guerrero P., Ibarburu I., Dueñas M. T., de la Caba K., (2013), Characterization and antimicrobial analysis of chitosan-based films. J. Food Eng. 116: 889-899.