Metallurgical Aspects of the Spinning Process in Metallic Liners

Journal of Environmental Friendly Materials

مقاله 7، دوره 5، شماره 1 - شماره پیاپی 9، شهریور 2021، صفحه 35-46   

نوع مقاله: Original Article

نویسندگان

S. M. J Hoseini¹؛ H Ghayour¹؛ A. S Golazani²؛ M. K Asgarani¹؛ I Ebrahimzadeh¹

¹Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

²Department of Materials Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran

چکیده

Spinning is one of the novel and unique processes in metal forming for the production of cylindrical and conical thin-walled parts with precise tolerances, good surface smoothness and suitable mechanical properties. This process includes conventional spinning, shear forming and flow forming. Metallurgical investigation is great importance in this process. The microstructure obtained from the spinning specimens, especially the shear forming and flow-forming, shows that the grains and the impurity particles are elongated in the direction of the main axis and are also stretched in the circumferential direction. This change in grain size on the roller side was larger than on the mandrel side. Fragmentation of coarse and brittle particles has also been observed. Also, due to the amount of strain and forces applied, the grain size decreases and as a result, the strength increases. The texture of the spinning parts has also changed. As the thickness decreases, the orientation of the grains and textures increases and the large angle boundaries increase

کلیدواژه‌ها

Spinning؛ Shear Forming؛ Flow Forming؛ Microstructure؛ Texture

مراجع

[1] P. Pawar, A. Pagar, A. Shah and S. Yevale, Int. J. Recent Innov. Trends Comput. Commun., 5(2017), 1280.

[2] S. Kalpakjian and S. Rajagopal, Appl. Metalworking, 2(1982), 211.

[3] D. Marini, D. Cunningham, P. Xirouchakis and J. Corney, Int. J. Mech. Eng. Technol. (IJMET), 7(2016), 285.

[4] C. C. Wong, T. Dean and J. Lin, International J. Mach. Tools Manuf., 43(2003), 1419.

[5] Q. Xia, G. Xiao, H. Long, X. Cheng and X. Sheng, Int. J. of Mach. Tools Manuf., 85(2014), 100.

[6] E. Hagan and J. Jeswiet, Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 217(2003), 213.

[7] W. F. Hosford and R. M. Caddell: Metal Forming Mechanics And Metallurgy, Third Edition, Cambridge University Press, (2007).

[8] M. Sivanandini, S. Dhami and B. Pabla, Int. J. Sci. Eng. Res., 3(2012), 1.

[9] M. Hayama, T. Murota and H. Kudo, Bulletin Of JSME, 8(1965),453.

[10] B. Avitzur and C. T. Yang, Journal of Eng. Ind., Trans. of the ASME, 82(1960), 231.

[11] S. Kobayashi, I. K. Hall and E. G. Thomsen, J. of Eng. Ind., Trans. of the ASME, 83(1961), 485.

[12] M. Held, Propellants, Explosives, Pyrotechnics, 10(1985), 125.

[13] F. Wang, P. Su, L. Qin, S. Dong, Y. Li and j. Dong, Acta Metallurg. Sin., 33(2020), 1226.

[14] H. Beni, Y. Beni and F. Biglari, Part C: J. Mech. Eng. Sci., 225(2010), 509.

[15] M.Tapase, M. han and K.V.Gurav, Int. J. Eng. Dev..Res., 12(2014), 3004.

[16] L. Radović, M. Nikačević and B. Jordović, Trans. Nonferrous Metals Soc. China, 22(2012), 991.

[17] M. Zhan, X. Wang and H. Long, Mater. Des., 108(2016), 207.

[18] D. Brandon, P. Ari gur, Z. Bratt and M. Gur, Mater. Sci. Eng., 44(1980), 185.

[19] X.X.Wang, M.Zhan and M.W.Fu, Procedia. Eng., 207(2017), 1725.

[20] M. Guillot, T. McCormack, M. Tuffs, A. Rosochowsk, S.Halliday and P. Blackwell, Procedia. Eng., 207(2017), 1719.

[21] K. Valdez, B. Wynne and M. Lee, Proceedings Of The 22nd International Esaform Conference On Mater. Forming: Esaform 2019(AIP), 2113(2019), 170001.

[22] Z. Li, M. Zhan, X. Fan, X. Wang and F. Ma, J. Mater. Res. Technol., 9(2020), 4706.

[23] C. Kubilay, Writer, Flow Forming Of Aeroengine Materials. [Performance], PHD Thesis, University of Manchester,En., (2014).

[24] G. Xiao, Q. Xia, X. Cheng and Y. Zhou, The Int. J. Adv. Manuf. Technol., 78(2015), 971.

[25] P.Maj, P.Blyskun, S.Kut, B.Romelczyk-Baishya, T.Morgala, B.Adamczyk-Cieslak and J.Mizera, J. Mater. Proces. Tech., 253(2018), 64.

[26] Q. Xia, G. Xiao, H. Long, X. Cheng and B. Yang, Mater. Des., 59(2014), 516.

[27] X. Y. Wu, H. R. Zhang, H. L. Chen, L. N. Jia and H. Zhang, China Foundry, 14, (2017),138.

[28] W. C. Xu, D. B. Shan, Z. L. Wang, G. P. Yang, Y. LÜ and D. C. Kang, Trans. Nonferrous Metals Soc. of China, 17, (2007), 1205.

[29] S.Debin, L.Yan, L.Ping and X. Yi, J. Mater. Proces. Technol., 115(2001), 380.

[30] C. X. Ren, Q. Wang, Z. J. Zhang, Y. K. Zhu and Z. F. Zhang, Acta. Metallurg. Sin. (En. Lett.), 30, (2017), 212.

[31] S. Gondo, H. Arai, S. Kajino and S. Nakano, Metals, 10, (2020), 793.