Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach

Journal of Advanced Materials and Processing

دوره 8، شماره 3، آذر 2020، صفحه 53-64   

نوع مقاله: Research Paper

نویسندگان

Ali Ziaei-Asl^{* 1}؛ Mohammad Reza Saviz¹؛ Javad Pourabdollah²

¹Department of Mechanical Engineering, Engineering Faculty, Azarbaijan Shahid Madani University, Tabriz, Iran

²Department of Mechanical Engineering, East Azarbaijan Science and Research Branch, Islamic Azad University, Tabriz, Iran

چکیده

In this paper, creep analysis of a thick-walled spherical pressure vessel made of Functionally Graded Material (FGM) under thermo-mechanical loadings has been investigated based on Bailey-Norton Law. Considering the nonlinearity of the creep behavior, there is no analytical solution that can accurately determine the stresses of an FGM as a function of time and thermal boundaries, thus in this paper, a new method based on the Taylor Series expansion of the creep strain rate is developed to solve the Beltrami-Michell equation by employing an asymptotic method. The resulting quantities are compared with the numerical ones and show good accuracy. The impacts of FGM constants and wall-thickness, and series order on the creep stress and strain distributions are evaluated. The results are depicted graphically and reveal that even for vessels with high wall thickness and FGM constants, the proposed method equipped with high orders of the Taylor series produces accurate results. Also, due to the agreement of both numerical and analytical methods, this method can be generalized to study the creep of other symmetric FGM structures.

کلیدواژه‌ها

Creep؛ Spherical Pressure Vessel؛ Thermo-mechanical analysis؛ Functionally Graded Material

مراجع

[1] H.-S. Shen, Functionally graded materials: Nonlinear analysis of plates and shells, ed., CRC Press, 2016,

[2] A. Amiri Delouei, A. Emamian, S. Karimnejad, H. Sajjadi, A. Tarokh, "On 2d asymmetric heat conduction in functionally graded cylindrical segments: A general exact solution", Int. J. Heat Mass Transfer, Vol. 143, No.  2019, pp. 118515.

[3] A.H. Sofiyev, N. Kuruoğlu, "The stability of fgm truncated conical shells under combined axial and external mechanical loads in the framework of the shear deformation theory", Compos. B. Eng., Vol. 92, No.  2016, pp. 463-476.

[4] M. Niino, "Functionally gradient materials as thermal barrier for space plane", J. Jpn. Compos Mater., Vol. 13, No.  1987, pp. 257-264.

[5] N. Oxman, "Structuring materiality: Design fabrication of heterogeneous materials", Arch. Design, Vol. 80, No. 4, 2010, pp. 78-85.

[6] S.H. Mathes, H. Ruffner, U. Graf-Hausner, "The use of skin models in drug development", Adv. Drug Deliv. Rev., Vol. 69, No.  2014, pp. 81-102.

[7] G. Udupa, S.S. Rao, K. Gangadharan, "Functionally graded composite materials: An overview", Procedia Mater. Sci., Vol. 5, No.  2014, pp. 1291-1299.

[8] F.V. Tahami, A.H. Daei-Sorkhabi, F.R. Biglari, "Creep constitutive equations for cold-drawn 304l stainless steel", Mater. Sci. Eng.: A , Vol. 527, No. 18, 2010, pp. 4993-4999.

[9] J.T. Boyle, J. Spence, Stress analysis for creep, ed., Elsevier, 2013,

[10] V. Daghigh, H. Daghigh, A. Loghman, A. Simoneau, "Time-dependent creep analysis of rotating ferritic steel disk using taylor series and prandtl–reuss relation", Int. J. Mech. Sci., Vol. 77, No.  2013, pp. 40-46.

[11] Q. Cen, D.K.L. Tsang, Y. Lu, "Creep damage analysis of thin-walled pressure vessel based on continuum damage model under static loading", Int. J. Press. Vessel. Pip., Vol. 177, No.  2019, pp. 103994.

[12] D. Pathania, G. Verma, "Temperature and pressure dependent creep stress analysis of spherical shell", Int. J. Appl. Mech. Eng., Vol. 24, No. 1, 2019, pp. 105-115.

[13] M. Eslami, M. Babaei, R. Poultangari, "Thermal and mechanical stresses in a functionally graded thick sphere", Int. J. Press. Vessel. Pip., Vol. 82, No. 7, 2005, pp. 522-527.

[14] Y. Bayat, M. Ghannad, H. Torabi, "Analytical and numerical analysis for the fgm thick sphere under combined pressure and temperature loading", Arch. Appl. Mech., Vol. 82, No. 2, 2012, pp. 229-242.

[15] E.-S. Habib, M.A. El-Hadek, A. El-Megharbel, "Stress analysis for cylinder made of fgm and subjected to thermo-mechanical loadings", J. Met., Vol. 9, No. 1, 2019, pp. 4.

[16] A. Loghman, A. Ghorbanpour Arani, S.M.A. Aleayoub, "Time-dependent creep stress redistribution analysis of thick-walled functionally graded spheres", Mech. Time Depend. Mater., Vol. 15, No. 4, 2011, pp. 353-365.

[17] J. Jafari Fesharaki, A. Loghman, M. Yazdipoor, S. Golabi, "Semi-analytical solution of time-dependent thermomechanical creep behavior of fgm hollow spheres", Mech. Time Depend. Mater., Vol. 18, No. 1, 2014, pp. 41-53.

[18] Y.Y. Yang, "Time-dependent stress analysis in functionally graded materials", Int. J. Solids Struct., Vol. 37, No. 51, 2000, pp. 7593-7608.

[19] K. Daneshjou, M. Bakhtiari, R. Alibakhshi, M. Fakoor, "Transient thermal analysis in 2d orthotropic fg hollow cylinder with heat source", Int. J. Heat Mass Transfer, Vol. 89, No.  2015, pp. 977-984.

[20] A. Amiri Delouei, A. Emamian, S. Karimnejad, H. Sajjadi, D. Jing, "Two-dimensional analytical solution for temperature distribution in fg hollow spheres: General thermal boundary conditions", INT. COMMUN. HEAT MASS, Vol. 113, No.  2020, pp. 104531.

[21] M.Z. Nejad, M.D. Kashkoli, "Time-dependent thermo-creep analysis of rotating fgm thick-walled cylindrical pressure vessels under heat flux", Int. J. Eng. Sci., Vol. 82, No.  2014, pp. 222-237.

[22] S.R. Holdsworth, M. Askins, A. Baker, E. Gariboldi, S. Holmström, A. Klenk, M. Ringel, G. Merckling, R. Sandstrom, M. Schwienheer, S. Spigarelli, "Factors influencing creep model equation selection", Int. J. Press. Vessel. Pip., Vol. 85, No. 1, 2008, pp. 80-88.

[23] V. Kobelev, "Some basic solutions for nonlinear creep", Int. J. Solids Struct., Vol. 51, No. 19, 2014, pp. 3372-3381.